Modular Compact Rheometer:
MCR 102e/302e/502e
-
-
-
- +5
- 360°
- Your entry ticket into the world of QC testing and rheological product development, upgradeable with sample-adaptive controllers
- EC motor technology based on 25 years of expertise and market leadership with a torque range from 2 nNm to 200 mNm
- Normal force measurements up to 50 N
The new MCR Evolution series is the result of consistent thinking and rethinking, of continuous development based on decades of experience and the feedback of more than 10,000 satisfied customers. The combination of innovative and thousandfold field-proven technology with the modular design represents the benchmark in its class. With 200+ accessories the MCR Evolution rheometer series gives you endless possibilities for rheological investigations and material characterization. Experience sophisticated rheological research and advanced QC testing like never before.
Key features
The best now better: the new MCR Evolution series
For more than 25 years we have continuously extended our portfolio in close collaboration with our most important innovation driver, YOU, our highly valued customers and rheometer users. We are now proud to present the new MCR Evolution series: rheometers that push your work one step ahead.
The benefits of the new MCR Evolution series
- The fastest one-hand coupling and decoupling of measuring geometries in just one second – even at extreme temperatures (-160 °C to 1000 °C): Novel quick-connect mechanism
- Precisely measure even low-viscosity samples with our entry-budget model: Higher sensitivity (from 7.5 nNm to 2 nNm)
- Stable results even for long-term measurements with low torque: Improved thermal management within the EC motor starting from MCR 302e
- More space for sample handling and exchange of accessories: Extended working height starting from MCR 302e
- The only device on the market with a trimming mirror for a 360° view of the sample with no blind spots, which avoids sample preparation errors and leads to highly reproducible results.
- Detection of any sample behavior change even at the shortest time scales: Reproducible duration of each measuring point down to 1 ms
- Full pharma compliance: The best pharma package for the RheoCompass software (21 CFR Part 11, full data integrity according to ALCOA+)
Takes work off your hands: Unique motor and sample-adaptive controller technology
The MCR Evo series builds on 25 years of research, development, and constant improvement. This results in technology which pushes the boundaries of rheometry. The combination of the EC motor (Permanent Magnet Synchronous Motor) using a high-precision air bearing with active thermal management, integrated normal force sensor, and a high-resolution optical encoder, for example, allows rheological measurements at the lowest torques ever. The unique sample-adaptive controllers for measurement in rotation (TruRate™) and oscillation (TruStrain™) work for 99 % of all samples and measurements “out of the box” with the perfect combination of speed and accuracy – save time and nerves and even get better data at the same time!
Excellence in every component and every work step
After decades in the field, Anton Paar understands and anticipates what is required for outstanding rheological analysis. With this knowledge in mind, we designed every component and created every handling step to be part of a smooth and intelligent whole:
- The patented Toolmaster™ technology automatically recognizes measuring systems
- One-hand exchange of measuring systems due to the QuickConnect coupling
- T-Ready™ detects sample temperature equilibration in real-time
- The TruGap™ feature detects the real measuring gap
- The trimming mirror gives you a 360° view of the sample and thus supports high measurement repeatability. And many more
Choose from more than 100 test templates, set report filters, and use remote control
The intuitive RheoCompass software offers predefined as well as customized test templates and analysis definitions. Furthermore, it is possible to export your rheological data and generate reports. Data can easily be filtered by e.g. year, batch number, or operator, and displayed within seconds. Due to the Ethernet connection, the rheometer can be remote-controlled from anywhere via the company network. Gap setting, adjustments, and tests can also be started directly from the MCR rheometer, minimizing annoying switches between the computer and the device, e.g. during sample preparation.
Unlimited possibilities: add one of more than 200 accessories
Whatever your rheological applications are and will be in the future – Anton Paar rheometers are quickly and easily adapted to meet your needs. Their flexibility makes them the most cited instruments in scientific publications on rheological investigations. An extensive range of application-specific accessories is available to extend the rheometer’s capabilities, including DMA measurements, extensional rheology, rheo-optics (e.g. microscopy and Raman spectroscopy), magneto- and electrorheology, dielectric spectroscopy, interfacial rheology, UV curing, pressure- and humidity-dependent rheology, tribology, and many more. A wide range of temperature accessories allow you to apply and control temperatures from -160 °C to 1000 °C.
Your partner for special applications and customized solutions
With the special model MCR 502e Power you have the highest available torque of 300 mNm and highest available normal force of 70 N at your fingertips. This means you can perform fatigue- and heating-controlled stress tests on asphalt mixtures, for example.
Based on decades of experience in rheometry and rheology, Anton Paar can make nearly everything possible. We develop and supply customized products for all kinds of specific applications. With our in-house production in Austria and a dedicated R&D team just next door, we develop and supply customized products for all kinds of specific applications. Don’t hesitate to contact us in order to discuss your requirements and to find a customized solution for your measurement task.
Specifications
| Technical Data | Unit | MCR 102e | MCR 302e | MCR 502e Power |
| Bearing design | - | Air, fine-pored carbon | ||
| Motor design | - | Electronically Commutated (EC) - Permanent Magnet Synchronous Motor | ||
| Displacement transducer design | - | High-resolution optical encoder | ||
| Normal force measurement design (US Pat. 6167752, 1996) | - | 360 ° capacitive sensor, non-contacting, fully integrated in bearing | ||
| Active thermal management of bearing and normal force sensor | - | No | Yes | Yes |
| Working modes | - | Combined Motor Transducer (CMT) | ||
| Minimum torque (rotation) | nNm | 5 | 1 | 100 |
| Minimum torque (oscillation) | nNm | 5 [1] | 0.5 | 50 |
| Maximum torque | mNm | 200 | 230 | 300 |
| Minimum angular deflection (set value) | µrad | 0.5 | 0.05 | 0.05 |
| Maximum angular deflection (set value) | µrad | ∞ | ∞ | ∞ |
| Minimum angular velocity [2] | rad/s | 0 | 0 | 0 |
| Maximum angular velocity Maximum speed | rad/s 1/min | 314 3000 | 314 3000 | 220 2100 |
| Minimum angular frequency [3] | rad/s | 10 -7 | 10 -7 | 10 -7 |
| Maximum angular frequency [4] Maximum frequency | rad/s Hz | 628 100 | 628 100 | 628 100 |
| Normal force range | N | -50 to 50 | -50 to 50 | -70 to 70 |
| With Exposed Support Plate (WESP / Space) [5] | - | No | Optional | No |
| Without Support Plate (WSP) | - | No | Optional | No |
| Dimensions (W x H x D) | mm | 444 x 678 x 586 | 444 x 733 x 586 | 444 x 753 x 586 |
| Weight | kg | 42 | 46 | 47 |
| Additional Device Features | ||||
| Device display with remote control of software (decoupled from measuring sensor for mechanical and electromagnetic interference prevention) | - | Yes | Yes | Yes |
| Direct strain/stress controller | - | Yes | Yes | Yes |
| TruRate™ / TruStrain™ (sample adaptive controller) | - | Optional | Yes | Yes |
| Raw data (LAOS, waveform) | - | Optional | Yes | Yes |
| Normal force profiles (set and read) | - | Yes | Yes | Yes |
| Velocity profiles, tack, squeeze | - | Optional | Yes | Yes |
| Automatic gap control/setting (AGC/AGS) | - | Yes | Yes | Yes |
| Electronic trim lock for measuring geometry | - | Yes | Yes | Yes |
| Fully automatic temperature calibration | - | Yes | Yes | Yes |
| TruGap™ (permanent control of the real measuring gap) (US Pat. 6499336, 2000) | - | Optional | Optional | Optional |
| T-Ready™ [6] (detection of sample temperature equilibrium time) (US Pat. 8904852, 2011) | - | Yes | Yes | Yes |
| Toolmaster™ (measuring geometries and accessories, storing of zero-gap) (US Pat. 7275419, 2004) | - | Yes | Yes | Yes |
| QuickConnect Coupling for measuring geometries (one-hand operation, screwless) | - | Yes | Yes | Yes |
| Trimming mirror (360° blind sample spot prevention) | - | Yes | Yes | Yes |
| Three-point support of device (three robust feet for tool-free one hand alignment) | - | Yes | Yes | Yes |
| Three-point support for mounting of measuring cells (wobble prevention, no misalignment after changing of cells) | - | Yes | Yes | Yes |
| Maximum temperature range | °C | -160 to +1000 | -160 to +1000 | -160 to +1000 |
| Maximum pressure range | bar | up to 1000 | up to 1000 | up to 1000 |
| Ready for DMA in torsion and tension | - | Yes | Yes | Yes |
| Ready for tribology | - | Yes | Yes | Yes |
| Ready for powder flow and shear rheology | - | Yes | Yes | Yes |
[1] 2 nNm with activated TruStrain™ option
[2] In controlled shear stress (CSS) mode. In controlled shear rate (CSR) mode depending on measuring point duration and sampling rate.
[3] Theoretical value (duration per cycle = 2 years)
[4] Higher frequencies are possible using multi-wave functionality (942 rad/s (150 Hz) or even higher, depending on measuring system and sample)
[5] Enlarged working space underneath the support plate (flange) [6] Depending on used temperature device
Standards
EN
DIN
ASTM
ISO
US Pharmacopoeia (USP)
European Pharmacopoeia (Ph. Eur.)
DIN EN ISO
Standards
EN
DIN
ASTM
ISO
US Pharmacopoeia (USP)
European Pharmacopoeia (Ph. Eur.)
DIN EN ISO
Standards
EN
DIN
ASTM
ISO
US Pharmacopoeia (USP)
European Pharmacopoeia (Ph. Eur.)
DIN EN ISO
Anton Paar Certified Service
- More than 350 manufacturer-certified technical experts worldwide
- Qualified support in your local language
- Protection for your investment throughout its lifecycle
- 3-year warranty
Documents
-
A Multi-Task Rheological Test for Characterization of Adhesive Applications Application Reports
-
Calculation of the Critical Shear Rate in a Cylinder Measuring System Application Reports
-
Catalyst-Enhanced Curing of Two-component Epoxy Coatings Application Reports
-
Combined rheological methods - From rheo-optics to magneto-rheology and beyond Application Reports
-
Comparison of Polyethylene PE Melts Using Frequency Sweeps Application Reports
-
Determination of Humidity-Dependent E-Moduli Application Reports
-
Determination of Mechanical Properties of Balance Springs Application Reports
-
Determination of Tack Using Different Adhesive Substances and Substrates Application Reports
-
Determination of Temperature-Affected Polymer Softening Application Reports
-
Determination of Yield Stress of Petroleum Acc. to USP 1912 Application Reports
-
Do You Dare to Replace Dairy? - Part 2 Application Reports
-
Do You Dare to Replace Dairy? - Part 3 Application Reports
-
Do You Dare to Replace Dairy? The Flow Behavior of Plant-Based Cream Application Reports
-
E-Book - A Practical Guide for Great Building Materials Application Reports
-
E-Book - Automotive tribology: Analyzing greases, oils and components Application Reports
-
E-Book - Field Guide to Battery Materials Characterization – Revised and Updated Application Reports
-
E-Book - Field Guide to Food Powder Characterization Application Reports
-
E-Book - Field Guide to Food and Feed Testing Application Reports
Similar products
Complementary products
If you do not find the item you require, please contact your Anton Paar sales representative.
MEAS. CONE CP25-1 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 25 mm, angle: 1°
DISPOSABLE DISHES DD65/TINPLATE ID:
65 mm, TINPLATE, 1 pack = 100 pcs
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
Suitable for measuring geometries with up to 60mm diameter
MEAS. SYSTEM CC27 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 26.66 mm Consisting of:
- Meas. cylinder B-CC27
- Meas. cup C-CC27
MEAS. PLATE PP25/S FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 25 mm, sandblasted
LOWER MEAS. PLATE L-PP50/SS/CTD D:
50 mm, NO GROOVE, SS
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
MEAS. CUP HOLDER H-D-CC27
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
MEAS. PLATE PP08 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 8 mm
LOWER MEAS. PLATE L-PP08-3.5/SS/CTD D:
8 mm, SS, RAISED MEAS. SURFACE: 3.5mm
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
MEAS. CONE CP60-1 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 60mm, angle: 1°
SHAFT FOR DISPOSABLE MEASURING- SYSTEMS D-CP/PP 7, WITHOUT TOOLMASTER
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
Please order separately if required, the Toolmaster (p/n 184708) with additional definition for which geometry the file is required.
INSET I-PP25/SS D:
25mm, SS
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
INSET I-PP50/SS D:
50mm, SS
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
MEAS. SYSTEM DG26.7 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 26.7 mm Consisting of:
- Meas. cylinder B-DG26.7
- Meas. cup C-DG26.7
INSET I-PP60/SS D:
60 mm, SS
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
INSET I-PP08/SS (WITH GROOVE) D:
8 mm, SS
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
DISP./REMOVEABLE PL. D-PP25/SS/S07 D:
25 mm, STAINLESS STEEL
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
DISPOSABLE PLATE D-PP40/AL/S07 D:
40 mm, ALUMINIUM, 1 pack = 10 pcs
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
DISPOSABLE PLATE D-PP08/AL/S07 D:
8 mm, ALUMINIUM, 1 pack = 10 pcs
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
DISPOSABLE DISHES DD41/TINPLATE ID:
41 mm, TINPLATE, 1 pack = 100 pcs
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
Suitable for measuring geometries with up to 35mm diameter
SELF-LOCKING FITTING 9 mm
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
MEAS. CONE CP50-1 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 50 mm, angle: 1°
MEAS. CONE CP50-2 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 50 mm, angle: 2°
MEAS. PLATE PP25 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 25 mm
MEAS. PLATE PP50 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 50 mm
INSET I-PP04/CU/CX (WITH GROOVE) D:
4 mm, COPPER ALLOY, CERID COATING
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
DISPOSABLE PLATE D-PP08/SS/S07 D:
8 mm, STAINLESS STEEL
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
MEAS. PLATE PP04 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 4 mm
COVER / SOLVENT TRAP 80 mm PEEK|FOR P-PTD 200 / P-PTD 220
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- consists of two hight-adjustable halves made from PEEK and metal
- suitable up to 220 °C and solvent-based samples
- suitable as solvent trap for PP/CP measuring geometries > 25 mm
- suitable as cover for all PP/CP measuring geometries up to 75 mm
- can be put in place after sample loading and trimming
- can not be used in combination with active Peltier hood
C-PTD 180/AIR PELTIER TEMPERATURE CONTROL DEVICE
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- for concentric cylinder measuring geometries
- temperature range: 0 to 180 °C
MEAS. CONE CP25-2 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 25 mm, angle: 2°
MEAS. CYLINDER B-DG42 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 42 mm
MEAS. SYSTEM DG26.7/AL FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 26.7 mm, aluminium Consisting of:
- Meas. cylinder B-DG26.7
- Meas. cup C-DG26.7/AL
MEAS. CONE CP35-1 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 35 mm, angle: 1°
MEAS. CONE CP25-0.5 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 25 mm, angle: 0.5°
DISP. LOWER MEAS. PLATE D-L-PP50/AL/CTD D:
50 mm, ALUMINIUM, 1 pack = 10 pcs
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
MEAS. CONE CP20-0.5 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 20 mm, angle: 0.5°
DISPOSABLE PLATE D-PP20/AL/S07 D:
20 mm, ALUMINIUM, 1 pack = 10 pcs
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
DISPOSABLE CONE D-CP25-2/AL/S07 D:
25 mm, ANGLE: 2°, AL, 1 pack = 10 pcs
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
MEAS. CONE CP60-0.5 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 60 mm, angle: 0.5°
MEAS. CONE CP40-0.3 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 40 mm, angle: 0.3°
DISPOSABLE PLATE D-PP12/AL/S07 D:
12 mm, ALUMINIUM, 1 pack = 10 pcs
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
DISP./REMOVEABLE PL. D-PP50/SS/S07 D:
50 mm, STAINLESS STEEL
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
DISPOSABLE PLATE D-PP10/AL/07 D:
10 mm, ALUMINIUM, 1 pack = 10 pcs
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
DISPOSABLE CONE D-CP25-1/AL/S07 D:
25 mm, ANGLE: 1°, AL, 1 pack = 10 pcs
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
INSET I-PP25/SS/S D:
25 mm, SS, SANDBLASTED
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
MEAS. CYLINDER B-CC17 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 16.66 mm
MEAS. CUP HOLDER H-D-CC14
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
MEAS. CUP C-CC27
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
MEAS. CYLINDER B-CC28.72-15 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 28.72 mm, L_CYL: 15 mm Recommended for C-PTD200, C-ETD300 and C-ETD200/XL
MEAS. CONE CP75-1 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 75 mm, angle: 1°
DISP./REMOVEABLE CONE D-CP40-1/SS/S07 D:
40 mm, ANGLE: 1°, STAINLESS STEEL
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
DISP./REMOVEABLE CONE D-CP25-2/SS/S07 D:
25 mm, ANGLE: 2°, STAINLESS STEEL
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
DISPOSABLE MEAS. CUP D-C-CC27/AL ASPHALT ALUMINIUM, 1 pack = 100 pcs
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
DISPOSABLE PLATE D-PP08/AL/P2/S07 D:
8 mm, ALUMINIUM, PROFILED: 1X0.5
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
DISPOSABLE PLATE D-PP05/AL/S07 D:
5 mm, ALUMINIUM, 1 pack = 10 pcs
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
SILICONE MOULD FOR ASPHALT BARS 3x9x35 mm.
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
C-PTD 150/XL/AIR/18P AIR COOLED PELTIER TEMPERATURE DEVICE
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- for concentric cylinder measuring geometries
- with integrated fan for counter cooling CoolPeltier
- temperature range: +5*) to 150 °C
*) The lower temperature range depends on the ambient conditions.
SILICON MOLD FOR ASPHALT BINDER (PP04)
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
MEAS. CUP C-CC25/AL/XL
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
RECIRCULATING COOLER AWC100 100-230V / 50-60Hz
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
DISPOSABLE MEAS. PLATE EMP 30 D:
25 mm, ALUMINIUM, 1 pack = 10 pcs
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
For discontinued holder D-CP/PP/Q1
DISPOSABLE MEAS. PLATE EMP 31 D:
50 mm, ALUMINIUM, 1 pack = 10 pcs
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
For discontinued holder D-CP/PP/Q1
MEAS. SYSTEM CC27/AL FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 26.66 mm, aluminium Consisting of:
- Meas. cylinder B-CC27
- Meas. cup C-CC27/AL
MEAS. SYSTEM CC17/AL FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 16.66 mm, aluminium Consisting of:
- Meas. cylinder B-CC17
- Meas. cup C-CC17/AL
MEAS. PLATE PP40 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 40 mm
STIRRER ST22-6V-16/106 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 22 mm, 6 wings vertical (Haake FL 100)
COVER / SOLVENT TRAP 80 mm GLASS| FOR P-PTD 200 / P-PTD 220
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- with hight-adjustable ring made from glass and cover made from metall
- suitable up to 220 °C and solvent-based samples
- suitable as solvent trap for PP/CP measuring geometries > 25 mm
- suitable as cover for all PP/CP measuring geometries up to 60 mm
- can not be used in combination with active Peltier hood
STIRRER ST22-4V-16/106 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 22 mm, 4 wings diagonal (Haake FL 100)
CONNECTION KIT FOR FLUID CIRCULATORS
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
Recommended to connect a fluid circulator to the MCR. Includes all necessary hoses and connections.
STIRRER ST22-4V-40/113 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 22 mm, 4 wings vertical
EJECTOR CC17, Z4 FOR DISPOSABLE SYSTEMS
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
EJECTOR CC27, Z3 FOR DISPOSABLE SYSTEMS
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
EJECTOR CC39 FOR DISPOSABLE SYSTEMS
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
MEAS. SHAFT BC12.7 FOR XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 12.7 mm
MEAS. CUP C-CC27/AL ALUMINIUM
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
STIRRER ST24-4V-30/124 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 24 mm, 4 wings vertical
S-LP25/AL/G1 SCREW-ON LOWER MEAS. PLATE
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Diameter: 25 mm
- Material: hard anodized aluminium
- Suitable for all temperature devices with external thread M60
- With groove on the outer edge (G1) to prevent run off of
excess material
S-LP50/AL/G1 SCREW-ON LOWER MEAS. PLATE
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Diameter: 50 mm
- Material: hard anodized aluminium
- Suitable for all temperature devices with external thread M60
- With groove on the outer edge (G1) to prevent run off of
excess material
S-LP60/AL/G0 SCREW-ON LOWER MEAS. PLATE
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Diameter: 60 mm
- Material: hard anodized aluminium
- Suitable for all temperature devices with external thread M60
- Without groove (G0)
S-LP62/AL/G0 SCREW-ON LOWER MEAS. PLATE
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Diameter: 62 mm
- Material: hard anodized aluminium
- Suitable for all temperature devices with external thread M60
- Without groove (G0)
FILTER ELEMENT CARBON FILTER IDG3
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
COVER CC/DG XL (PEEK)
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
S-LP08/AL/G1 SCREW-ON LOWER MEAS. PLATE
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Diameter: 8 mm
- Material: hard anodized aluminium
- Suitable for all temperature devices with external thread M60
- With groove on the outer edge (G1) to prevent run off of
excess material
S-LP25/AL/P2/G1 SCREW-ON LOWER MEAS. PLATE
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Diameter: 25 mm, profiled
- Material: hard anodized aluminium
- Suitable for all temperature devices with external thread M60
- With groove on the outer edge (G1) to prevent run off of
excess material
S-LP50/AL/P2/G1 SCREW-ON LOWER MEAS. PLATE
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Diameter: 50 mm, profiled
- Material: hard anodized aluminium
- Suitable for all temperature devices with external thread M60
- With groove on the outer edge (G1) to prevent run off of
excess material
S-LP25/AL/S/G1 SCREW-ON LOWER MEAS. PLATE
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Diameter: 25 mm, sandblasted
- Material: hard anodized aluminium
- Suitable for all temperature devices with external thread M60
- With groove on the outer edge (G1) to prevent run off of
excess material
S-LP50/AL/S/G1 SCREW-ON LOWER MEAS. PLATE
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Diameter: 50 mm, sandblasted
- Material: hard anodized aluminium
- Suitable for all temperature devices with external thread M60
- With groove on the outer edge (G1) to prevent run off of
excess material
S-LP62/AL/P2/G0
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- diameter: 62 mm, profiled
- material: hard anodized aluminium
- suitable for all temperature devices with external thread M60
- without groove
S-LP08/SP/G0 SCREW-ON LOWER MEAS. PLATE
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Diameter: 8 mm
- Material: hard anodized aluminium
- Suitable for all temperature devices with external thread M60
- With serial number for SmartPave
- Without groove (G0)
S-LP25/SP/G0 SCREW-ON LOWER MEAS. PLATE
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Diameter: 25 mm
- Material: hard anodized aluminium
- Suitable for all temperature devices with external thread M60
- With serial number for SmartPave
- Without groove (G0)
S-LP25/SS/G1 SCREW-ON LOWER MEAS. PLATE
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Diameter: 25 mm
- Material: stainless steel
- Suitable for all temperature devices with external thread M60
- With groove on the outer edge (G1) to prevent run off of
excess material
S-LP50/SS/G1 SCREW-ON LOWER MEAS. PLATE
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Diameter: 50 mm
- Material: stainless steel
- Suitable for all temperature devices with external thread M60
- With groove on the outer edge (G1) to prevent run off of
excess material
S-LP62/SS/G2 SCREW-ON LOWER MEAS. PLATE
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Diameter: 62 mm
- Material: stainless steel
- Suitable for all temperature devices with external thread M60
- Round groove (G2) for easy cleaning
S-LP62/SS/G0 SCREW-ON LOWER MEAS. PLATE
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Diameter: 62 mm
- Material: stainless steel
- Suitable for all temperature devices with external thread M60
- Without groove (G0)
S-LP75/SS/G0 SCREW-ON LOWER MEAS. PLATE
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Diameter: 75 mm
- Material: stainless steel
- Suitable for all temperature devices with external thread M60
- Includes fitting open-end wrench 174253
- Without groove (G0)
S-LP25/SS/P2/G1 SCREW-ON LOWER MEAS. PLATE
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Diameter: 25 mm, profiled
- Material: stainless steel
- Suitable for all temperature devices with external thread M60
- With groove on the outer edge (G1) to prevent run off of
excess material
S-LP25/SS/S/G1 SCREW-ON LOWER MEAS. PLATE
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Diameter: 25 mm, sandblasted
- Material: stainless steel
- Suitable for all temperature devices with external thread M60
- With groove on the outer edge (G1) to prevent run off of
excess material
VISCOSITY STANDARD DKD 2000 AW 100 ml - 1500 / 460 / 45 mPa.s
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
VISCOSITY STANDARD DKD 2000 AW 250 ml - 1500 / 460 / 45 mPa.s
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
SELF-LOCKING COUPLING
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
MCR Rheometer Setups for:
Envelope Density
MCR 102e/302e/502e MCR 102e
- Envelope density setup from the leader in powder characterization
- Buy an envelope density device and benefit from the full rheometer functionality
- Budget-friendly option for envelope density determination
- 21 CFR Part 11 compliant
- Automatic detection of setup to save time and eliminate errors
TRANSPORT PROTECTION MCR XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
MEAS. PLATE PP50/P2 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 50 mm, profiled: 1X0.5
DISP. LOWER MEAS. PLATE D-L-PP08/AL/CTD D:
8 mm, ALUMINIUM, 1 pack = 10 pcs
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
MEAS. PLATE PP50/S FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 50 mm, sandblasted
DUST COVER MCR RHEOMETERS SUITABLE FOR MCR 52/72/92/102/302/102e
MCR 102e/302e/502e MCR 102e | MCR 302e
SPLASH GUARD FOR MCR 52/102/302/102e/302e
MCR 102e/302e/502e MCR 102e | MCR 302e
ADAPTER TD/8P-TD/18P MCR XX2 TO MCR X2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- cable to adapt temperature control devices of MCR xx2 to MCR x2 rheometer
P-PTD 220/AIR FOR MCR xx2 / MCR xx2e PELTIER TEMPERATURE DEVICE (PLATE)
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- temperature range: -10°C to 220°C (low temperature range depends on the ambient conditions)
- plate with active Peltier temperature control (heating/cooling)
- for cone/plate and parallel plate measuring geometries
- with built-in fan for air counter-cooling
- with universal plate holder (screw-on thread) for use of measuring plates (also disposable) and other accessories
- with Toolmaster for automatic tool recognition and configuration
- installation in the rheometer through three-point support without the risk of misalignment
- maximized torsional stiffness due to constructional torque support
MEAS. PLATE PP20 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 20 mm
MEAS. PLATE PP25/P2 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 25 mm, profiled: 1X0.5
MEAS. CONE CP40-2 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 40 mm, angle: 2°
MEAS. CONE CP50-0.5 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 50 mm, angle: 0.5°
MEAS. PLATE PP12 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 12 mm
INSET I-PP50/CU/CX D:
50 mm, COPPER ALLOY, CERID COATING
MCR 102e/302e/502e MCR 102e
MEAS. CONE CP40-1 FOR X2/XX2
MCR 102e/302e/502e MCR 102e
D: 40 mm, angle: 1°
SPATULA
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
ACTIVATED CARBON FILTER FOR DRYPOINT AIR DRYER
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
MEAS. PLATE PP15 FOR X2/XX2
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
D: 15 mm
DUST COVER MCR RHEOMETERS SUITABLE FOR MCR 502/702/302e/502e/702e
MCR 102e/302e/502e MCR 302e | MCR 502e Power
SPLASH GUARD FOR MCR 502/702/502e/702e
MCR 102e/302e/502e MCR 502e Power
GENDER CHANGER DB9M/DB9M
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
Optical accessory for MCR:
Rheometer-Infrared Spectrometer Adapter
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Accessory for structure analysis and rheo optics
- Lets you connect your infrared spectrometer with an MCR rheometer
- Investigates the chemical composition and rheology
Accessory for MCR:
DMA Measuring Systems
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- For dynamic mechanical analysis (DMA) in bending, tension, torsion, and compression
- Solid rectangular fixtures, three-point bending geometries, cantilevers, compression systems
- Compatible with MCR 702e MultiDrive
Temperature Control for MCR:
Peltier Systems
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Effective and convenient heating and cooling
- Temperature control with minimized temperature gradients from -50 °C to 220 °C
- Modular system for combination with Rheo-Optics accessories
- For cone-plate, parallel-plate, and cylinder measuring systems
Accessory for MCR:
Magneto-Rheological Device
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Investigate the influence of a magnetic field on magneto-rheological fluids. Control the sample temperature between -10 °C and +170 °C
- Get accurate results with the patented TwinGap geometry that keeps the sample in place at high shear rates
- Applicable to industries such as engineering and medicine
Accessory for MCR:
Electro-Rheological Device
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Accessory for “Additional Parameter Settings”
- Characterization of electrorheological fluids
- Electric field of up to 12.5 kV can be applied
Accessory for MCR:
Dielectric Spectrometer
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Combine rheology and dielectric spectroscopy
- Study a material’s response to an applied electric field
- Gain information on a material’s structure and behavior
Accessory for MCR:
Rheo-SALS
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Accessory for “Structure Analysis and Rheo-Optics”
- Small-angle light scattering (SALS) combined with rheology
- For investigating shear-dependent shape and orientation of microstructure
- Temperature range from -20 °C to 300 °C
Optical Accessory for MCR:
UV Light Curing System
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Accessory for additional parameter setting
- For the investigation of UV-curing reactions
- Simultaneous characterization of rheological behavior and UV-light-initiated curing
- Built-in temperature control
Accessory for MCR:
Interfacial Rheology System
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Accessory for extended material characterization
- Highly precise studies of the flow properties of interfacial layers
- Comprehensive rheological investigations of emulsion and foam stability
Accessory for MCR:
Rheo-Microscope
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Combining light microscopy with rheological measurements
- Automated image/video recording during measurements
- Lens magnifications: 5x, 10x, 20x, 50x
- Modules for polarization and fluorescence microscopy available
- Temperature range from -20°C to +300 °C
Accessory for MCR:
Immobilization Cell
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Accessory for “Additional Parameter Settings”
- Immobilization kinetics of paper coatings in real-time
- Liquid temperature control
Accessories for MCR:
Ball Measuring System & Building Material Cell
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Accessories for extended material characterization
- Measuring systems for large-particle rheology
- Designed for building materials, food products, slurries, and sludges
- Built-in temperature control
Temperature Control for MCR:
Liquid Temperature Devices (LTD)
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- For measurements at constant temperatures from -30 °C to +180 °C
- For parallel-plate, cone-plate, concentric cylinder, and double-gap measuring geometries
Temperature Control for MCR:
Electrical Temperature Devices (ETD)
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Electrically heated temperature control devices available for MCR rheometers
- For high-temperature measurements up to 400 °C
- For parallel-plate, cone-plate, concentric cylinder, and double-gap measuring geometries
MCR Rheometer Setups for:
Powder
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Accurate powder analysis with the powder flow cell and shear cell
- True powder rheology to analyze bulk solids in any state, from fluidized to consolidated powders
- Wide range of dedicated powder measurement methods for quality control and R&D
Accessory for MCR:
Humidity Option
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Accessory for “Additional Parameter Settings”
- Control the impact of the relative humidity on a material’s rheological behavior
Temperature Control:
Convection Temperature Devices (-160 °C to +1000 °C)
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- For temperature-controlled rheological and DMA measurements on melts, solids, films, and fibers from -160 °C to 1000 °C
- Homogeneous temperature distribution for accurate & stable results
- For MCR measuring systems: parallel-plate, cone-plate, DMA in torsion or extension, controlled relative humidity, and more
Accessory for MCR:
Polarized Light Imaging
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Accessory for “Structure Analysis and Rheo-Optics”
- For visualization of shear stress in the sample
- For parallel-plate and cone-plate systems and a temperature range from -20 °C to 300 °C.
Accessory for MCR:
Particle Imaging Velocimetry
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Accessory for “Structure Analysis and Rheo-Optics”
- For visualization of flow fields
Accessory for MCR:
Rheo-SANS/SAXS
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Accessory for “Structure Analysis and Rheo-Optics”
- Small-angle scattering for nanostructure analysis
- Temperature range from -50 °C to +300 °C
Accessory for MCR Temperature Devices:
Low Temperature Options
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Combinable with electric and convection temperature devices
- Choice of solutions for different low temperature requirements: down to -40 °C, -90 °C, or -160 °C
- Toolmaster functionality for automatic system configuration and error-proofing
Temperature Control:
Peltier Systems with TruGap™
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- TruGap™ measures the real gap size to ensure accurate measurements even if the measuring temperature changes
- No loss of accuracy: set the zero-gap at any temperature you want
- Reduces waiting times: T-Ready™ detects when temperature equilibrium is reached and starts the test automatically
Universal Extensional Fixture and Sentmanat Extension Rheometer:
UXF & SER
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- For extensional rheology investigations
- Strain- or stress-controlled extensional and DMA tests with the UXF
- Extensional tests at high torques with the Sentmanat Extension Rheometer
Pressure Cell
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- For investigation of the effect of pressure on rheological properties
- Unique pressure range of up to 1000 bar
- Choose between gas or liquid pressurization
Accessory for MCR:
Rheometer Geometries
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Wide range of measuring systems for RheolabQC and the MCR rheometer series
- Concentric cylinder, double-gap, cone-plate, and parallel-plate systems, vane geometries and spindles, Krebs spindles
- Customized solutions upon request
Accessory for MCR and RheolabQC:
Flexible Cup Holder
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Accessory for “Extended Material Characterization"
- Holds, for example: paint cans, yogurt cups, other containers
- Can be combined with stirrers, concentric cylinder geometries, and a Pt100 temperature sensor
MCR Tribology Cell:
T-BTP
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Based on the ball-on-three-plates measuring principle
- Excellent temperature control from -160 to +600 °C
- Adjustable spring stiffness in z-direction
- Normal force range expanded down to 0.1 N
MCR Tribology Cell:
T-PTD 200
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Based on the ball-on-three-plates measuring principle
- Excellent temperature control from -40 °C to +200 °C
- Sliding speed control of up to 3.3 m/s
- Rolling bearing attachment optional
MCR Tribology Cell:
T-PID/44
MCR 102e/302e/502e MCR 102e | MCR 302e | MCR 502e Power
- Based on the pin-on-disc measuring principle
- Excellent temperature control from -30 °C up to +200 °C
- Adjustable spring stiffness in z-direction
- Sliding speed control of up to 2.3 m/s
The Rheo Academy
Learn more
Superb lithium-ion batteries
Find out more
Smarter Polymer Processing. Better Results.
Learn more
