Automatyczny analizator chemisorpcji w przepływie:
ChemBET Pulsar
- Programowalne sekwencje analiz z funkcjami automatyzacji ograniczają nakład pracy
- Automatyczny wtrysk pętlowy, miareczkowanie impulsowe i analiza programowana temperaturowo minimalizują wpływ operatora
- Wymagana niewielka przestrzeń
ChemBET Pulsar łączy w sobie przystępną cenę i automatyzację. To kompaktowe, stanowiskowe urządzenie do badań katalizatorów. Połączenie programowania sekwencji analizy z automatycznym wtryskiem pętlowym, przełączaniem gazu i wzrostem temperatury pieca umożliwiają łatwe miareczkowanie impulsowe oraz analizę przy zaprogramowanej temperaturze przy minimalnym udziale użytkownika. Wyposażenie standardowe obejmuje zaawansowane narzędzia do redukcji danych włącznie z dekonwolucją wartości szczytowej. Funkcje te są spotykane w jednostkach pomiarowych najwyższej klasy.
Specyfikacje
Stacje próbek | 1 analityczna i 1 specjalna stacja odgazowywania |
Standardowa wielkość próbki | 0,1 g do 1,0 g |
Zakres temperatury | Od temperatury otoczenia do 1100 °C |
Współczynnik wzrostu temperatury | Od 1°C/min do 50°C/min |
Chłodzenie pieca | Wbudowany wentylator |
Wejścia gazu | 4 analityczne i 1 kalibracji |
Cela pomiarowa | Kwarcowa U-rurka do adsorpcji chemicznej w wysokiej temperaturze |
Główny detektor | 2-włóknowy TCD, odporny na utlenianie i obecność amoniaku (W/Re) |
Wymiary (szer. x wys. x gł.) | 45,2 cm x 63 cm x 41,4 cm (18 cali x 25 cali x 16 cali) |
Standardowe funkcje | Programowana desorpcja temperaturowa (TPD) Programowana redukcja temperaturowa (TPR) Programowane utlenianie temperaturowe (TPO) Programowana reakcja temperaturowa (TPRx) Obróbka katalizatora Obszar powierzchni przepływu BET Miareczkowanie impulsowe Kalibracja impulsowa |
Certyfikowany serwis Anton Paar
- ponad 350 certyfikowanych przez producentów ekspertów technicznych na całym świecie
- Wykwalifikowany zespół wsparcia posługujący się lokalnym językiem
- Ochrona Twojej inwestycji przez cały okres jej użytkowania
- Trzyletnia gwarancja
Dokumenty
-
Advanced sorption suite Broszury
-
ChemBET Pulsar Brochure Broszury
-
NEW HORIZONS IN PARTICLE ANALYSIS Broszury
-
Catalyst Characterization - From Fresh to Spent Sprawozdania z testów zastosowań
-
Chemical Adsorption on Zeolite Catalysts Sprawozdania z testów zastosowań
-
Graphene Characterization Sprawozdania z testów zastosowań
-
Material Brief: Active Metal Area and Dispersion of a Supported Metal Catalyst - ChemBET Pulsar Sprawozdania z testów zastosowań
Produkty uzupełniające
Jeśli nie możesz znaleźć żądanej pozycji, skontaktuj się z przedstawicielem handlowym firmy Anton Paar.

MANTLE, MALE INLET, 1 PHONO
Standard sized mantle (5cm internal width) with maximum continuous operating temperature of 350 C. Single phono jack thermocouple, instrument (IEC320) style power plug (male inlet). Only accommodates one standard sized cell at a time. Compatible instrument models include Monosorb (models 21 and newer), ThermoFlow, ChemBET, Autosorb 1, and Autosorb Degasser

MANTLE, LG, MALE INLET, 2 PHONO
Large pocket mantle (7.5 cm internal width) with maximum continuous operating temperature of 350 C. Dual phono jack thermocouple, instrument (IEC320) style power plug (male inlet). Required for non- standard cells that do not comfortably fit inside the standard sized mantle or to accommodate 2 large bulb cells. Compatible instrument models include Monosorb (models 21 and newer), ThermoFlow, ChemBET, Autosorb 1, Autosorb Degasser, and Autosorb iQ.

CALIBRATION SYRINGE, 1.00 mL

GROUNDED THERMOCOUPLE ASSEMBLY

TYPE F CELL HOLDER, 6 mm, EPDM
Dual quick connect sample cell holder for type F sample cells. Includes 6 mm cell adapters and 6 mm EPDM o-rings.

THERMOCOUPLE CABLE

CHEMISORPTION REFERENCE MATERIAL, 7001
CHRM 7001, Platinum on Alumina validates static and flow Chemi systems. 2% Pt sample with certified nominal value of 30% metal dispersion. Need Helium and Hydrogen gases in flow cell and a furnace. Minimum 1 g. Grey pellets for 2 runs, each reusable 3 times.

MANTLE, MALE INLET, 2 PHONO
Standard sized mantle (5 cm internal width) with maximum continuous operating temperature of 350 C. Dual phono jack thermocouple, instrument (IEC320) style power plug (male inlet). Only accommodates one standard sized cell at a time. Compatible instrument models include Monosorb (models 21 and newer), ThermoFlow, ChemBET, Autosorb 1, Autosorb Degasser, and Autosorb iQ (models 5 and older).

MANTLE, LG, MALE INLET, 1 PHONO, QUARTZ
Standard sized mantle (5 cm internal width) with maximum continuous operating temperature of 450°C (with quartz sample cells). Single phono jack thermocouple with one instrument (IEC320) style power plug (male inlet). Only accommodates one standard sized cell at a time. Compatible instrument models include Monosorb (models 21 and newer), ThermoFlow, ChemBET, Autosorb 1, Autosorb Degasser, and XeriPrep.

TYPE F CELL, 6 mm MESO, CAPILLARY
Type F meso cell with capillary stem. Borosilicate glass. Nominal Dimensions: 6 mm OD (4 mm ID), cell length 115.5 mm, 4.8 cm3 capacity

TYPE G CELL HOLDER, 6 mm, EPDM
Dual quick connect sample cell holder with thermocouple port. For use with 6 mm type G sample cells. Includes 6 mm cell adapters and 6 mm EPDM o-rings.

CALIBRATION SYRINGE NEEDLE, 1 cm3

MANTLE, LG, MALE INLET, 1 PHONO
Large pocket mantle (7.5 cm internal width) with maximum continuous operating temperature of 350 C. Single phono jack thermocouple with additional thermocouple coiled (not used) to be used as a spare. Instrument (IEC320) style power plug (male inlet). Required for non- standard cells that do not comfortably fit inside the standard sized mantle or to accommodate 2 large bulb cells. Compatible instrument models include Nova-e and XeriPrep Degasser.

PULSE LOOP, 1/8 INCH, 100 µL

PULSE LOOP, 1/8 INCH, 50 µL

TYPE F CELL, 6 mm MACRO
Type F macro cell. Borosilicate glass. Nominal Dimensions: 6 mm OD (4 mm ID), cell length 123 mm, 12.5 cm3 capacity

CHEMISORPTION REFERENCE MATERIAL, 7002
CHRM 7002, Calcium oxalate validates chemi flow and Mass Spec systems. TCD peaks over temperature profile. MS identifies as water, CO and CO2. Need Helium gas in flow cell with a furnace. Minimum 0.07 g. Vial for 2 runs of non reusable white powder.

SURFACE AREA REFERENCE MATERIAL, 2003
SARM 2003, Aluminum oxide used to validate low surface area sorption. Certified value of Specific Surface Area of nominally 0.5 m2/g. Need He and N2 (or Kr) gas and liquid nitrogen. Minimum 5 g (or 0.6 g). One bottle contains 11 g sample of white pellets for 11 point BET.

DEWAR, 350 mL

TYPE B LONG CELL, 12 mm SM BULB
Type B long cell with 12 mm stem and small bulb. Borosilicate Glass. Nominal Dimensions: 12 mm OD (10 mm ID), cell length 283 mm, bulb diameter 16 mm, 1 cm3 capacity.

VACUUM GREASE .25 OUNCE

SEPTUM [PACK OF 2]

O-RING, BUNA 010, BLACK, PACK OF 2

O-RING, BUNA 015, BLACK, PACK OF 2

TYPE G CELL, 6 mm MESO, QUARTZ
Type G cell for chemisorption applications including temperature programmed analyses and pulse titrations. Quartz for temperatures above 350 degC.

QUARTZ WOOL, PACK OF 2.5 g

TYPE F CELL, 6 mm MESO
Type F meso cell. Borosilicate glass. Nominal Dimensions: 6 mm OD (4 mm ID), cell length 115.5 mm, 4.8 cm3 capacity

TYPE F CELL, 6 mm MESO, QUARTZ
Type F meso cell. Quartz for temperatures above 350 C. Nominal Dimensions: 6 mm OD (4 mm ID), cell length 115.5 mm, 4.8 cm3 capacity