Rotational Viscometer:
ViscoQC
-
-
-
- +12
- 360°
- Single-point measurements on 3.5” color display
- Viscosity range from 1 mPa·s to 6,000,000 mPa·s
- 4 L spindles to measure low-viscosity samples (e.g. solvents, oils, and more)
Do you need an easy-to-use viscometer that provides convenient operation for the most reliable and traceable viscosity results in your day-to-day work? ViscoQC rotational viscometers ensure the quality of your substance – from liquid to semi-solid.
Eliminate the risk of measurement errors and free up your time and budget with the simplest spindle exchange mechanism, automatic spindle detection, automatic speed searching function for new formulations, and more.. Your existing SOPs can be easily converted if the same setup and settings are used.
It’s time to switch to an easier way. It’s time to switch to ViscoQC.
Key features
The easiest-to-use rotational viscometer – unpack and measure
Setup takes less than two minutes: ViscoQC comes preassembled and includes an SOP booklet with first steps and straightforward user training. Our rotational viscometers guide you from startup through the entire measurement process via an intuitive user interface. Continue to use the SOP methods of your existing rotational viscometer: ViscoQC uses the same instrument setup and measuring settings to deliver the same results. Spindles with magnetic coupling for easy, fast, and safe spindle exchange come as standard.
Full traceability for reliable viscosity tests
Make your viscosity measurements error-proof and 100% traceable with our unique Toolmaster™ feature: spindles are automatically detected by the viscometer as soon as they’re attached. With ViscoQC 300, you can further restrict each method to a unique spindle identity. Furthermore, all connected accessories are detected and documented as well:
Built-in digital leveling automatically monitors and indicates the correct levelling status, which prevents faulty measurements and ensures remarkable, full-scale range accuracy of ± 1%. If you need to measure new formulations, ViscoQC automatically leads you to the right spindle/speed configuration using TruMode™.
Your future-proof rotational viscometer
You can upgrade your ViscoQC with accessories to cover any need:
- PTD 80 – For fast and accurate control of sample temperature (+15 °C to +80 °C)
- PTD 175 – High performance temperature control, suitable for standards like ASTM D2983/D8210/D5133/7110 and DIN 51398
- PTD 100 Cone-Plate – For small sample volumes (0.5 mL to 2 mL)
- ETD 300 – For high-temperature measurements of bitumen and hot melts, and for standards like ASTM D4402 and AASHTO T316
- Heli-Plus – For non-flowing substances like gels, pastes, and creams
You can add other software functionality to ViscoQC 300 with V-Curve, adding real-time graphs, analysis (e.g., yield point), programmability, and extended method functionality.
Be fully compliant within one day
ViscoQC is qualified and ready to use within a single day and is compliant to 21 CFR Part 11, GMP, and GAMP 5. The V-Comply software for ViscoQC 300 delivers features like audit trail, electronic signatures and advanced user management. Additionally, it can be accompanied by a pharma qualification document. This elevates the qualification process to much more than just a simple installation and basic IQ/OQ. An in-depth risk analysis, performance qualification, traceability matrix, and final qualification report enhance the value of the qualification package for the entire qualification process.
The most convenient way to generate and export QC data
Every ViscoQC includes the V-Collect PC data collection software. As ViscoQC 100 doesn’t store any data, results are directly exported or printed via the Brother QL-700 label printer after each test. ViscoQC 300 has memory space for up to 999 measurements with up to 10,000 sub-measurements on 150 MB. Additionally, it’s possible to print and export data as PDF, CSV, page printer (USB or network), or label printer. For automated data export, ViscoQC 300 can be integrated into your network via Laboratory Information Management System (LIMS) or FTP Server. Kickstart your paperless lab with AP Connect to connect your instruments, communicate measurement information, and ensure compliance.
Durable parts, maximum uptime
Since ViscoQC uses highly durable bearings and regularly performs an automatic bearing check (TruSine™), your uptime is maximized and ongoing service costs are reduced to a minimum. All of our spindles are made of superior stainless steel (AISI 316L), which increases spindle lifetime by protecting them from corrosion.
Specifications
| ViscoQC 100 | ViscoQC 300 | |||||
|---|---|---|---|---|---|---|
| L | R | H | L | R | H | |
| Viscosity test | Single-point | Multi-point | ||||
| Viscosity range [mPa·s or cP] (depends on measuring system) | 0.2* to 6 M | 1.6** to 40 M | 13.2*** to 320 M | 0.1* to 6 M | 1.3** to 40 M | 10.6*** to 320 M |
| Speed [rpm] | 0.1 rpm to 200 rpm 740 increments | 0.01 rpm to 250 rpm Speed list with 18 standard speeds Freely selectable speeds within the speed range | ||||
| Max. spring torque [mNm] | 0.0673 | 0.7187 | 5.7496 | 0.0673 | 0.7187 | 5.7496 |
| Accuracy | ±1.0 % full scale range | |||||
| Repeatability | ±0.2 % full scale range | |||||
| Heli-Plus compatibility | ✔ | |||||
| PTD 100 Cone-Plate compatibility | ✔ | |||||
| ETD 300 compatibility | ✔ | |||||
| Peltier temperature control | +15 °C to +80 °C 0 °C to + 100 °C | +15 °C to +80 °C 0 °C to + 100 °C | ||||
| Electrical temperature control | +25 °C to +300 °C (for SSA/DIN with ETD 300) | |||||
| Liquid temperature control/sensing | Ambient to +100 °C (control of L/RH spindles with optional thermostat bath) | |||||
| Temperature sensing | -60 °C to +300 °C (temperature sensing with optional Pt100) | |||||
| Intuitive user interface | 3.5" color LCD display | 7" color touchscreen display; Options: keyboard, mouse, 2D bar code reader | ||||
| Languages | EN, DE, ES, FR, CN, JA, KO, IT, RU, PT | EN, DE, ES, FR, IT, PT, JA, KO, RU, ZH-CN, ZH-TW, PO, CZE | ||||
| Built-in digital leveling | ✔ | |||||
| Easiest spindle exchange (magnetic coupling) | ✔ | |||||
| Automatic spindle recognition (Toolmaster™) | ✔ | |||||
| Automatic measuring range calculation | ✔ | |||||
| Automatic speed searching function (TruMode™) | ✔ | |||||
| Spindle correction by user | ✔ | |||||
| Users, user groups | None | ✔ Customizable | ||||
* With optional PTD 100 Cone-Plate, with L1 spindle 15 mPa·s
** With optional PTD 100 Cone-Plate, with RH1 spindle 100 mPa·s
*** With optional PTD 100 Cone-Plate, with RH1 spindle 800 mPa·s
M = million
DIN = Concentric cylinders, double-gap
SSA = Small sample adapter (SC4-xx)
UL = Ultra-low viscosity adapter
Standards
ASTM
BS
Chinese Pharmacopoeia (ChP)
DIN
EN
ISO
Japanese Pharmacopoeia (JP)
European Pharmacopoeia (Ph. Eur.)
TAPPI
AASHTO
US Pharmacopoeia (USP)
Standards
ASTM
BS
Chinese Pharmacopoeia (ChP)
DIN
EN
ISO
Japanese Pharmacopoeia (JP)
European Pharmacopoeia (Ph. Eur.)
TAPPI
AASHTO
US Pharmacopoeia (USP)
Standards
ASTM
BS
Chinese Pharmacopoeia (ChP)
DIN
EN
ISO
Japanese Pharmacopoeia (JP)
European Pharmacopoeia (Ph. Eur.)
TAPPI
AASHTO
US Pharmacopoeia (USP)
Standards
ASTM
BS
Chinese Pharmacopoeia (ChP)
DIN
EN
ISO
Japanese Pharmacopoeia (JP)
European Pharmacopoeia (Ph. Eur.)
TAPPI
AASHTO
US Pharmacopoeia (USP)
Standards
ASTM
BS
Chinese Pharmacopoeia (ChP)
DIN
EN
ISO
Japanese Pharmacopoeia (JP)
European Pharmacopoeia (Ph. Eur.)
TAPPI
AASHTO
US Pharmacopoeia (USP)
Standards
ASTM
BS
Chinese Pharmacopoeia (ChP)
DIN
EN
ISO
Japanese Pharmacopoeia (JP)
European Pharmacopoeia (Ph. Eur.)
TAPPI
AASHTO
US Pharmacopoeia (USP)
Anton Paar Certified Service
- More than 350 manufacturer-certified technical experts worldwide
- Qualified support in your local language
- Protection for your investment throughout its lifecycle
- 3-year warranty
Documents
-
Adhesives | Measurement of Hot Melt Adhesives According to ASTM D3236 Application Reports
-
Adhesives | ViscoQC Quality Control of Adhesives Application Reports
-
Asphalt, Bitumen | Measurement of bitumen according to ASTM D4402 / AASHTO T316 Application Reports
-
Beverages | ViscoQC Quality Control of Fruit Juice Application Reports
-
Chemicals | Rotational Viscosity Testing in Battery Cell Manufacturing Application Reports
-
Chemicals | Rotational Viscosity Testing of Isocyanates with ViscoQC Application Reports
-
Coatings, Paints | ViscoQC Quality Control of Coatings and Paints Application Reports
-
Cosmetics | Rotational Viscosity Testing of Make-up (Remover) with ViscoQC Application Reports
-
Cosmetics, Pharma | Rotational Viscosity Testing of Hand Sanitizer with Visco Application Reports
-
Detergents | ViscoQC Quality Control of Dishwashing Detergents Application Reports
-
E-Book - Analytical Methods for the Evaluation of Lubricants Application Reports
-
E-Book - Field Guide to Food and Feed Testing Application Reports
-
E-Book - The Field Guide to Data Integrity in Regulated Industries Application Reports
-
E-Book - The Future of Plant-Based Foods Application Reports
Similar products
Complementary products
If you do not find the item you require, please contact your Anton Paar sales representative.
Temperature Control Solutions for ViscoQC:
Temperature Device PTD 80
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- For routine QC applications from +15 °C to +80 °C
- Solid-state Peltier: no liquids, no leaks, and maintenance-free
- Compact design: saves bench space and simplifies setup
- Fast thermal response time for quicker test readiness
- T-Ready™ feature signals sample temperature equilibration
Cone-Plate Measuring System with Integrated Peltier Temperature Device:
PTD 100 Cone-Plate
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- For small sample volumes from 0.5 mL to 2 mL
- Upgrades ViscoQC 100 and 300 to a cone-plate viscometer
- Two in one: Cone-plate and Peltier temperature device combined
- Automated gap setting process
- Magnetic coupling, Toolmaster™ feature, and temperature probe as standard
High-Temperature Viscometer Accessory:
ETD 300
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- Temperature control from +25 °C to +300 °C
- Applicable for ViscoQC 100 and 300
- Full control via ViscoQC display
- For measurement of bitumen, hot melts, polymers, waxes
- Complies with ASTM D4402, D3236, AASHTO T316, EN 13302, and more
Temperature Control Solutions for ViscoQC:
Temperature Device Water Bath
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- Temperature control of 600 mL beakers
- Budget-friendly solution for precise viscosity measurement
- Space-saving: mountable to ViscoQC stand
- Range: ambient to +100 °C (optional cooling coil with tap water)
Accessory for ViscoQC 100/300:
Flexible Cup Holder
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- Ensures your sample is always centered in the right place
- To easily center ½ pint, pint, quart containers, or 600 mL beakers
- Easily mounted on instrument stand
- Guarantees reproducible results
USB CABLE
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Motorized accessory for ViscoQC 100/300:
Heli-Plus
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- Convenient operation thanks to motorized stand instead of manual height adjustment
- Measure paste-like materials (e.g. mayonnaise) with helical T-bar spindle movement
- Simplest spindle exchange saves up to 15 seconds per measurement
SPINDLE T-E
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Needs clamp for moounting on ViscoQC Material SS316
SPINDLE T-B
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Needs clamp for moounting on ViscoQC Material SS316
SPINDLE T-A
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Needs clamp for moounting on ViscoQC Material SS316
SPINDLE T-C
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Needs clamp for moounting on ViscoQC Material SS316
SPINDLE T-F
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Needs clamp for moounting on ViscoQC Material SS316
Measuring Systems for ViscoQC:
Spindle L/RH
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- L or RH set included in standard viscometer delivery
- According to ISO 2555/ISO 1652
- To measure in an open beaker (infinite gap)
- Flexible cup holder for highest repeatability in viscosity results
Measuring Systems for ViscoQC:
Spindle DIN systems
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- Defined gap systems optionally available
- Concentric cylinders according to ISO 3219, DIN 53019
- Double-gap system according to DIN 54453
- For sample volumes from 2 mL to 18.5 mL
Measuring Systems for ViscoQC:
Spindle SSA/UL systems
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- Defined gap systems optionally available
- Gap size varies between small sample adapter systems
- Ultra-low viscosity adapter, to measure from 1 mPa·s
- For sample volumes from 6.7 mL to 16.1 mL
Measuring Systems for ViscoQC:
Spindle ASTM systems
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- Optional systems to determine low-temperature viscosity
- Insulated 4B2 system according to ASTM D2983/D8210
- L1D22 system according to ASTM D5133/D7110
- 4B2 requires 20 mL; L1D22 requires 16.1 mL
Measuring Systems for ViscoQC:
Spindle T-bar/Vanes
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- Optional systems to measure non-flowing samples
- T-bar spindles require Heli-Plus for helical movement
- Vanes to measure samples with particles (0.1 mm to 2 mm)
- Measure in an open beaker or directly in a sample container
MOUNTING LINK SET
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
MEASURING BOB SC4-14
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
MEASURING BOB SC4-15
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
MEASURING BOB SC4-16
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
MEASURING CUP C-6R
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Tube (316L), plug (PEEK) and FKM 70 O-ring
MEASURING CUP C-7R
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Tube (316L), plug (PEEK) and FKM 70 O-ring
MEASURING CUP C-8R
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Tube (316L), plug (PEEK) and FKM 70 O-ring
MEASURING SYSTEM SC4-14/6R
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Requires DIN Adapter or Peltier Temperature Device (PTD 80 or PTD 175) for mounting on ViscoQC Measuring system consists of B-SC4-14 (316L), C-6R (316L) and plug (PEEK) with FKM 70 O-Ring
MEASURING SYSTEM SC4-15/7R
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Requires DIN Adapter or Peltier Temperature Device (PTD 80 or PTD 175) for mounting on ViscoQC Measuring system consists of B-SC4-15 (316L), C-7R (316L) and plug (PEEK) with FKM 70 O-Ring
MEASURING SYSTEM SC4-16/8R
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Requires DIN Adapter or Peltier Temperature Device (PTD 80 or PTD 175) for mounting on ViscoQC Measuring system consists of B-SC4-16 (316L), C-8R (316L) and plug (PEEK) with FKM 70 O-Ring
MEASURING BOB CP40
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L For use with PTD 100 Cone-Plate Equipped with Toolmaster and magnetic coupling
MEASURING BOB CP41
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L For use with PTD 100 Cone-Plate Equipped with Toolmaster and magnetic coupling
MEASURING BOB CP52
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L For use with PTD 100 Cone-Plate Equipped with Toolmaster and magnetic coupling
MEASURING BOB CP51
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L For use with PTD 100 Cone-Plate Equipped with Toolmaster and magnetic coupling
MEASURING BOB CP42
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L For use with PTD 100 Cone-Plate Equipped with Toolmaster and magnetic coupling
MEASURING CUP PTD 100 Cone-Plate
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Ready to use with PTD 100 Cone-Plate. With Pt100 cable.
MOUNTING TOOL PTD 100 Cone-Plate FOR CONE-PLATE MEASURING BOBS
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
VISCOSITY STANDARD CANNON N44 500mL-90/35/5.8mPa.s 20/40/100°C
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Spindle Link (5pcs)
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Pack of 5. Pcs.
VISCOSITY STANDARD ANTON PAAR S60 500 ml - 140 / 46 / 6.0 mPa.s
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
VISCOSITY STANDARD ANTON PAAR N350 500 ml - 1100 / 270 / 19 mPa.s
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
VISCOSITY STANDARD ANTON PAAR S30000 500 ml - xxxxx / 21000 / 540 mPa.s
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
VISCOSITY STANDARD ANTON PAAR S200 500 ml - 565 / 157 / 15 mPa.s
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
PEEK PLUG MEASURING SYSTEM DIN/SSA/UL
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
GEL TIME KIT
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- A measuring kit for determining gel times of thermosetting compounds, resins, glues, etc.
- The glass rods, which serve as measuring bobs, can be used as disposable parts.
100 pcs. disp. cups DC-CC18 elongated For SC4-xx, CCxx bobs
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
GLAND 3.7x1.5x1.5 PTFE
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
ALLEN SCREW M3x5 STAINLESS STEEL
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
GLASS SYRINGE 5 ml LUER LOCK
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
INSULATION HOSE ARMAFLEX D12/34
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
COUNTERSUNK SCREW I-TORX M2.5x6 A2
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
VISCOSITY STANDARD SET FOR SVM 3000 4x4oz(120ml) CANNON S3, N14, N44, N415
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
VISCOSITY STANDARD H2O 1000 ml BIDEST. STERILE
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
SEAL RING G 1/8 PVC
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
DESICCANT BAG DESI PAK ( 15 pcs.) 4 DIN UNITS = 125 g
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
O-RING 7x2 FPM 75 VITON EXTREME
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
HOSE 6.4x9.6 mm TYGON CHEMICAL (FORMERLY:
NORPRENE CHEMICAL)
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
SEALING GASKET PTFE GL45
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
MEASURING BOB ETD SC4-34 SOLID 2 PARTS
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L For use with ETD 300 Equipped with Toolmaster and magnetic coupling
MEASURING SYSTEM SC4-25
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Requires DIN Adapter or Peltier Temperature Device (PTD 80 or PTD 175) for mounting on ViscoQC Measuring system consists of B-SC4-25 (316L), C-CC18 (316L) and plug (PEEK) with FKM 70 O-Ring
MEASURING CUP C-UL26/SS
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Tube (316L), plug (PEEK) and FKM 70 O-ring
MEASURING BOB B-UL26
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
MEASURING BOB SC4-25
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
MEASURING BOB SC4-28
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
MEASURING BOB SC4-29
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
MEASURING BOB SC4-31
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
MEASURING BOB SC4-34
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
Vapor protection for PTD 80
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
To be used with PTD 80. For evaporating or corrosive samples.
Hand Wheel Set
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Flat bath cover for PURA 10
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
COOLING COIL FOR PURA 10
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Installation cooling coil with tap water.
JULABO PURA 10 WATERBATH 20...100 °C +/-0.15 °C, 230V/50-60Hz
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
For pre-tempering samples in a 600 mL beaker at room temperature up to + 100 °C. 230 V / 50 Hz to 60 Hz
LABEL PRINTER USB BROTHER Label Printer QL-700
ViscoQC 100 L | 100 R | 100 H
LABELS 90 x 29 mm, 1 x 400 pcs. FOR BROTHER Label Printer
ViscoQC 100 L | 100 R | 100 H
Pt100 Clip
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Marking Tool CC12/Dm18
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Compatible with Mat. 198918 Measuring System CC12/D18
Spindle L5
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
SPINDLE SET T-BAR
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
A set of 6 T-bar spindles (A to F) for measuring paste-like, nonflowing substances. Comes with one magnetic coupling for all six T-bar spindles.
SPINDLE T-D
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Needs clamp for moounting on ViscoQC Material SS316
CLAMP FOR T-Bar SPINDLE
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
With one Toolmaster™ for T-bar identification, magnetic coupling.
ANGULAR SCREWDRIVER TORX T10
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
ANGULAR SCREWDRIVER TORX T20
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
O-RING 22x3 VMQ 70 SILICONE (RED-BROWN)
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- O-ring sitting on the bottom plug of cups of the following DIN/SSA/UL systems.
- Recommended for low- and high-temperature range, especially when working with PTD 175 Peltier temperature device.
VISCOSITY STANDARD APCL68 CCS (500 mL)
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- Low-temperature viscosity standard.
- Viscosity values from 19,584 mPa.s (-15 °C) up to 11,417 mPa.s (-10 °C)
VISCOSITY STANDARD APCL60 CCS (500 mL)
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- Low-temperature viscosity standard.
- Viscosity values from 21,961 mPa.s (-18 °C) up to 5,731 mPa.s (-5 °C)
CARRYING CASE ViscoQC
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
MEASURING SYSTEM DG26
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Requires DIN adapter or Peltier temp. device to be mounted on ViscoQC
MEASURING SYSTEM CC26
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Requires DIN adapter or Peltier temp. device to be mounted on ViscoQC
MEASURING SYSTEM CC18
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Requires DIN adapter or Peltier temp. device to be mounted on ViscoQC
MEASURING SYSTEM CC12
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Requires DIN adapter or Peltier temp. device to be mounted on ViscoQC
SPINDLE GUARD R
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Recommended for ViscoQC x00 - R
SPINDLE GUARD L
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Recommended for ViscoQC x00 - L
PT100 TEMPERATURE SENSOR
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Comes with a metal clip (mounting clamp) for fixing the Pt100 sensor on the rim of open sample vessels or on the L/R spindle guard.
SILICONE VISCOSITY STANDARD AP RT30k 600 ml - 33 / 30 Pa.s at 20 / 25 °C
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- 33 Pa·s / 30 Pa·s at 20 °C / 25 °C
- Recommended for ViscoQC x00 - H
SILICONE VISCOSITY STANDARD AP RT5k 600 ml - 5.6 / 5.0 Pa.s at 20 / 25 °C
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- 5.6 Pa·s / 5.0 Pa·s at 20 °C / 25 °C
- Recommended for ViscoQC x00 - R
SILICONE VISCOSITY STANDARD AP RT500 600 ml - 554 / 501 mPa.s at 20 / 25 °C
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- "554 mPa·s / 501 mPa·s at 20 °C / 25 °C
- Recommended for ViscoQC x00 - L and ViscoQC x00 - R"
SILICONE VISCOSITY STANDARD AP RT10 600 ml - 11 / 10 mPa.s at 20 / 25 °C
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- 11 mPa·s / 10 mPa·s at 20 °C / 25 °C
- Recommended for ViscoQC x00 - L
SPINDLESET RH
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Includes spindles RH2-RH7
SPINDLESET L
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Includes spindles L1-L4
SPINDLE RH1
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
SPINDLE RACK
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
With 7 positions. Prevents damage to spindles, which are not in use.
DIN ADAPTER
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Required for measurement with a concentric cylinder (CC), double-gap (DG), ultra-low viscosity adapter (UL), or SSA (SC4) measuring system if not using a Peltier temp. device.
KEYBOARD USA USB
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
KEYBOARD GERMAN USB
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
VISCOSITY STANDARD ANTON PAAR N26 (C) 100 ml - 50 / 21 / 4.2 mPa.s
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Recommended for DIN/SSA/UL spindles
VISCOSITY STANDARD ANTON PAAR N7.5 (M) 100 ml - 10 / 5.4 / 1.6 mPa.s
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Recommended for DIN/SSA/UL spindles
VISCOSITY STANDARD ANTON PAAR S3 (L) 100 ml - 3.7 / 2.3 / 0.9 mPa.s
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Recommended for DIN/SSA/UL spindles
VISCOSITY STANDARD ANTON PAAR N415 (H) 100 ml - 1100 / 330 / 32 mPa.sc
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Recommended for DIN/SSA/UL spindles
MEASURING SYSTEM DG26
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Requires DIN adapter or Peltier temp. device to be mounted on ViscoQC
LABELS 89 x 28 mm, 2 x 130 pcs. FOR DYMO LabelWriter
ViscoQC 100 L | 100 R | 100 H
For Dymo LabelWriter (ViscoQC 100 only)
STAINLESS BATH COVER FOR 600 ml BEAKER ACCESSORY JULABO CORIO C-BT5 (191891)
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
For Julabo bath thermostat to operate 600 mL beakers
STAND FOR BATH THERMOSTAT CORIO C-BT5
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
To mount Julabo bath thermostat on ViscoQC
JULABO CORIO C-BT5 BATH THERMOSTAT 20ºC_100°C +/-0.03°C, 100-115V/50-60Hz
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Requires stand for bath thermostat (P/N 194946) and stainless bath cover (P/N 194765) to be mounted on ViscoQC and to operate 600 mL beakers from ambient to +100 °C. 100 V to 115 V / 50 Hz to 60 Hz
SPINDLESET VANES
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Includes vane spindles V71 to V73.
SPINDLE V75
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Has only full immersion. For very low sample volume.
LABELS 89 x 36 mm, 2 x 260 pcs. FOR DYMO LabelWriter
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
For Dymo LabelWriter (ViscoQC 100, ViscoQC 300)
SILICONE VISCOSITY STANDARD AP RT50 600 ml - 55 / 50 mPa.s at 20 / 25 °C
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
55 mPa·s / 50 mPa·s at 20 °C / 25 °C
SILICONE VISCOSITY STANDARD AP RT100 600 ml - 111 / 100 mPa.s at 20 / 25 °C
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
111 mPa·s / 100 mPa·s at 20 °C / 25 °C
SILICONE VISCOSITY STANDARD AP RT1k 600 ml - 1.1 / 1.0 Pa.s at 20 / 25 °C
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
1.1 Pa·s / 1.0 Pa·s at 20 °C / 25 °C
SILICONE VISCOSITY STANDARD AP RT12k 600 ml - 14 / 13 Pa.s at 20 / 25 °C
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
14 Pa·s / 13 Pa·s at 20 °C / 25 °C
SILICONE VISCOSITY STANDARD AP RT60k 600 ml - 66 / 60 Pa.s at 20 / 25 °C
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
66 Pa·s / 60 Pa·s at 20 °C / 25 °C
SILICONE VISCOSITY STANDARD AP RT100k 600 ml - 111 / 100 Pa.s at 20 / 25 °C
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
111 Pa·s / 100 Pa·s at 20 °C / 25 °C
MEASURING SYSTEM SC4-21
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Requires DIN adapter or Peltier temp. device to be mounted on ViscoQC
MEASURING SYSTEM SC4-27
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Requires DIN adapter or Peltier temp. device to be mounted on ViscoQC
COVER DIN SPINDLES
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Made of PEEK to cover cups of DIN/SSA systems.
MEASURING SYSTEM CC12/D18
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Requires DIN adapter or Peltier temp. device to be mounted on ViscoQC
SPINDLE V74
ViscoQC 100 L | 100 R | 300 L | 300 R | 300 H
Has only full immersion. For very low sample volume.
EXTERNAL POWER SUPPLY
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Centering adapater PTD 80
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
For use with PTD 80
MEASURING CUP LOCK
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
PROTECTING COVER FOR KEYBOARD
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
In combination with keyboard (80809 or 80807)
POWER SUPPLY PoE INCL. POWER CABLE
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
FOAM PACKING MATERIAL ViscoQC
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
SPINDLE L1
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
SPINDLE L2
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
SPINDLE L3
ViscoQC 100 L | 100 R | 100 H | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
SPINDLE L4
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
SPINDLE RH2
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
SPINDLE RH3
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
SPINDLE RH4
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
SPINDLE RH5
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
SPINDLE RH6
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
SPINDLE RH7
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
PACKING SPINDLESET ViscoQC
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
MEASURING BOB B-CC12
ViscoQC 100 L | 100 R | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
MEASURING CUP C-CC12
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
C-CC12 (anodized aluminum) and plug (PEEK)
VITON O-RING FOR DIN/SC4 SYSTEMS
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
O-ring sitting on the bottom plug of cups of the following DIN/SSA systems.
MEASURING BOB B-CC18
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
MEASURING CUP C-CC18
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
C-CC18 (anodized aluminum) and plug (PEEK)
MEASURING BOB B-CC26
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
MEASURING CUP C-CC26
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
C-CC26 (anodized aluminum) and plug (PEEK)
MEASURING BOB B-CC12/D18
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
HOLDER DISPOSABLE MEASURING CUP CC12/D18
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
C-CC12 (anodized and uncoated aluminum) and Includes 100 pcs. disposable cups D18
MEASURING BOB B-DG26
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
MEASURING CUP C-DG26
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
C-DG26 (anodized aluminum)
MEASURING CUP C-DG26/SS
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
C-DG26 SS (316L)
O-RING 22x3 EPDM 70
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
O-ring sitting on the bottom plug of cups of the following DIN/SSA systems.
MEASURING CUP C-CC18/SS
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Tube (316L), plug (PEEK) and FKM 70 O-ring
MEASURING BOB SC4-18
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
MEASURING BOB SC4-21
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
MEASURING BOB SC4-27
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Material 316L with Toolmaster and magnetic coupling
GLASS ROD
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
10 pcs. of glass rods for Gel Time Kit.
MEASURING SYSTEM SC4-28
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Requires DIN adapter or Peltier temp. device to be mounted on ViscoQC
MEASURING SYSTEM SC4-29
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Requires DIN adapter or Peltier temp. device to be mounted on ViscoQC
MEASURING SYSTEM SC4-31
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Requires DIN adapter or Peltier temp. device to be mounted on ViscoQC
MEASURING SYSTEM SC4-34
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Requires DIN adapter or Peltier temp. device to be mounted on ViscoQC
MEASURING SYSTEM UL26
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
Requires DIN adapter to be mounted on ViscoQC or PTD 175 Peltier temperature device for ViscoQC 300 only
DISPOSABLE MEASURING CUP D22 1 pack = 100 pcs. (blank aluminium)
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
For measuring system 4B2 insulated and L1D22.
VISCOSITY STANDARD APCL16 CCS (500 mL)
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- Low-temperature viscosity standard.
- Viscosity values from 10 459 mPa.s (-40°C) up to 1 014 mPa.s (-18°C)
VISCOSITY STANDARD APCL20 CCS (500 mL)
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- Low-temperature viscosity standard
- Viscosity values from 21,337 mPa.s (-40 °C) up to 862.4 mPa.s (-10 °C)
VISCOSITY STANDARD APCL25 CCS (500 mL)
ViscoQC 100 L | 100 R | 300 L | 300 R | 300 H
- Low-temperature viscosity standard.
- Viscosity values from 19,907 mPa.s (-35 °C) up to 1,371 mPa.s (-10 °C)
VISCOSITY STANDARD APCL28 CCS (500 mL)
ViscoQC 100 L | 100 R | 300 L | 300 R | 300 H
- Low-temperature viscosity standard.
- Viscosity values from 16,682 mPa.s (-30 °C) up to 2,022 mPa.s (-10 °C)
VISCOSITY STANDARD APCL38 CCS (500 mL)
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
- Low-temperature viscosity standard.
- Viscosity values from 20,950 mPa.s (-25 °C) up to 2,670 mPa.s (-5 °C)
HOLDER DISPOSABLE MEASURING CUP D22
ViscoQC 100 L | 100 R | 100 H | 300 L | 300 R | 300 H
D22 (anodized and uncoated aluminum) and Includes 100 pcs. disposable cups D22
MEASURING SYSTEM SC4-18
ViscoQC 100 R | 100 H | 300 L | 300 R | 300 H
Requires DIN adapter or Peltier temp. device to be mounted on ViscoQC
COOLING COIL FOR BATH THERMOSTAT
ViscoQC 100 R | 100 H | 300 L | 300 R | 300 H
- For operating the Julabo CORIO™ C-BT5 Bath
- Thermostat close to ambient temperature
ANGULAR SCREWDRIVER TORX T30
ViscoQC 100 R | 100 H | 300 L | 300 R | 300 H
Temperature Control Solutions for ViscoQC:
Temperature Device PTD 175
ViscoQC 300 L | 300 R | 300 H
- Wide-range Peltier device: -45 °C to +175 °C
- Efficient heating and cooling with fast thermal response times
- No cooling liquids: clean, safe, and maintenance-free
- T-Ready™ feature signals sample temperature equilibration
- Complies with ASTM D2983, ASTM D4402, AASHTO T316, and more
LABEL PRINTER USB DYMO LabelWriter 450 Duo
ViscoQC 300 L | 300 R | 300 H
TOUCHSCREEN STYLUS
ViscoQC 300 L | 300 R | 300 H
Touchscreen stylus Bellagio Mini
Display Protection Foil ViscoQC 300
ViscoQC 300 L | 300 R | 300 H
Software Solutions for ViscoQC:
Software V-Curve
ViscoQC 300 L | 300 R | 300 H
- Upgrade your stand-alone ViscoQC 300
- Follow your measurement data live
- Programmable with up to 50 steps for more sophisticated tests
- For easy analysis of test data, e.g. yield stress, gel time, pot life
ETHERNET CABLE FOR PC CONNECTION CAT5E, RJ45G-RJ45G, SFTP, 2 m, CROSSED
ViscoQC 300 L | 300 R | 300 H
Only for ViscoQC 300. Cable for LIMS Bridge connection to PC for transferring measurement data.
BARCODE SCANNER 2D WITH USB CABLE
ViscoQC 300 L | 300 R | 300 H
Only for ViscoQC 300
Lab Execution System:
AP Connect Start
ViscoQC 300 L | 300 R | 300 H
- Kickstart your paperless lab
- Featuring key benefits of the Standard edition
- Restricted to one instrument, single user access, one export rule
Lab Execution System:
AP Connect Standard subscription license
ViscoQC 300 L | 300 R | 300 H
- Annual fee per instrument
- Time-saving processes: automatic, digital data transfer
- Top data quality: elimination of transcription errors
- Fast decisions: data at your fingertips
Lab Execution System:
AP Connect Standard one-time license
ViscoQC 300 L | 300 R | 300 H
- One-time fee per instrument
- Time-saving processes: automatic, digital data transfer
- Top data quality: elimination of transcription errors
- Fast decisions: data at your fingertips
Lab Execution System:
AP Connect Pharma subscription license
ViscoQC 300 L | 300 R | 300 H
- Annual fee per instrument
- Time-saving processes: automatic, digital data transfer
- Assurance of lab data integrity
- Fast decisions: data at your fingertips
Lab Execution System:
AP Connect Pharma one-time license
ViscoQC 300 L | 300 R | 300 H
- One-time fee per instrument
- Time-saving processes: automatic, digital data transfer
- Assurance of lab data integrity
- Fast decisions: data at your fingertips
Software Solutions for ViscoQC:
Software V-Comply
ViscoQC 300 L | 300 R | 300 H
- Upgrade your stand-alone ViscoQC 300
- Full compliance with FDA 21 CFR Part 11
- Adds audit trail, electronic signature, and more
- Optional qualification documentation available
Next-generation food analysis
Find out more
Food and Feed Testing
Find out more
Advanced lubricant testing for better results
Learn more
