Coatings, Paints

Nátěry, barvy

Nátěry a vrstvy aplikované v kapalné, plynné nebo pevné formě chrání a zlepšují povrchové vlastnosti velkého spektra substrátů. Hledáte-li způsob simulace vlastností při nanášení barvy v domácnosti nebo si přejete analyzovat složení komplexní nanovrstvy – Anton Paar umí nabídnout unikátní řešení měření. Najděte zde přístroje, které splňují Vaše požadavky, nebo nás prosím kontaktujte.

Kontaktujte nás

Anton Paar Produkty

Vaše volba: Zrušit všechny filtry X
Typ činnosti
Normy
Produktová skupina
Typ zařízení
Zobrazení do z

Nenalezeny žádné výsledky!

Analyzátor plynové sorpce: QUADRASORB evo

Analyzátor plynové sorpce: VSTAR

Analyzátor povrchové plochy a velikosti pórů: NOVAtouch

Analyzátor povrchové plochy: AutoFlow BET+

Analyzátor velikosti částic: Litesizer 100

Analyzátor velikosti částic: Litesizer 500

Analyzátory mikroporovité fyzické sorpce a chemisorpce: autosorb iQ

Automatizovaný analyzátor průtokové chemisorpce: ChemBET Pulsar

Perfect results with automatic cleaning and needle washing using up to three cleaning solvents.

Autosampler: Xsample 530

Bioindentor Anton Paar: UNHT³ Bio

Fraass Breaking Point Tester BPA 5 with bitumen coated plaque.

Bod lámavosti Fraass: BPA 5

With its extended low temperature range the automatic Abel closed cup tester can measure flash points or detect flammable vapors by the flash/no flash method

Bod vzplanutí Abel: ABA 4

With its extended low temperature range the automatic Tag closed cup tester can measure flash points or detect flammable vapors by the flash/no flash method.

Bod vzplanutí Tag: TAG 4

Chladicí systémy s vydutým okénkem pro čtyřkruhové goniometry: DCS 500

Digitální refraktometr: Abbemat

Abbemat Performance and Performance Plus

Digitální refraktometr: Abbemat Performance

Domed Hot Stage for Four-Circle Goniometers DHS 1100 with graphite dome for high-temperature X-ray studies of polycrystalline samples and thin films from 25 to 1100 °C

Domed Hot Stage pro čtyřkruhové goniometry: DHS 1100

HTR Compact: Rheometer autosampler pro vysokou kapacitu měření

HTR: Automatizace reometru pro vysokou kapacitu a komplexní zpracování vzorků

Hustoměr: DMA 4100 M

Hustoměr: DMA 4500 M

Hustoměr: DMA 5000 M

Hustotní senzor: L-Dens 2300

Hustotní senzor: L-Dens 3300

Inline hustoměr: L‑Dens 7000 series

Inline viskozimetr: L-Vis 510 a L-Vis 520 Ex

Kombinovaný senzor hustoty a rychlosti zvuku: L-Com 5500

Cora 5X00 Raman Spectrometer

Kompaktní Ramanovy spektrometry: Cora 5X00

Cryo & Humidity Chamber CHC plus+ is a unique combination of the multi-purpose CHC Cryo & Humidity Chamber and an advanced humidity (RH) generator for the analysis of humidity-dependent and/or temperature-dependent structural changes in materials using X-ray diffraction

Kryo & vlhkostní komůrka: CHC plus⁺

Kulový mlýn: BM500

Mikro Scratch systém: MST³

Mikroindentační systém: MHT³

Rotor 16SOLV HF100 expands the possibilities of Multiwave PRO for the microwave-assisted digestion and extraction of inorganic and organic samples and is easily upgraded for acid digestion applications by interchanging screw caps.

Mikrovlnný extrakční rotor: Rotor 16SOLV HF100

Rotor 16SOLV MF100 expands the possibilities of Multiwave PRO for the microwave-assisted digestion and extraction of inorganic and organic samples and is easily upgraded for acid digestion applications by interchanging screw caps.

Mikrovlnný extrakční rotor: Rotor 16SOLV MF100

The acid digestion rotor 16HF100 with 16 high pressure vessels is designed for high sample throughput and efficient handling.

Mikrovlnný rozkladný rotor: Rotor 16HF100

The acid digestion rotor 16MF100 with 16 pressure vessels is designed for high sample throughput and efficient handling.

Mikrovlnný rozkladný rotor: Rotor 16MF100

Mikrovlnný rozkladný rotor: Rotor 24HVT80

Mikrovlnný rozkladný systém: Multiwave GO Plus

Modulární kompaktní reometr: MCR 72/92

Modulární kompaktní reometr: MCR 102/302/502

Motorizované zarovnání pro XRD: platforma pro zarovnání v ose z

Měření tloušťky vrstvy: Řada Calotest

Měřicí hlava dynamického smykového reometru: DSR 502

Nano scratch tester: NST³

Nanoindentační tester: NHT³

Nízkoteplotní komůrka: TTK 600

Remote Operating Terminal with wall mounting support for smart sensors

Operační terminál / Vzdálený operační terminál

Plynový pyknometr: PentaPyc

Pyknometr pro testování pěnových vzorků: PentaFoam

Přenosný hustoměr: DMA35

Přenosný hustoměr: DMA 35 Basic

Přístroj pro měření hustoty a rychlosti zvuku: DSA 5000 M

Abbemat Heavy Duty

Refraktometr Heavy Duty: Abbemat Heavy Duty

Revetest® Scratch Tester: RST³

The RheolabQC is the quality control rheometer from Anton Paar. RheolabQC with temperature device C-PTD 180/AIR/QC and with Flexible Cup Holder.

Rotační reometr: RheolabQC

Rotační viskozimetr: ViscoQC

Rotor 1DRY is the ideal accessory for efficient handling of samples prior to digestion. Microwave-assisted drying takes a quarter of the time required by conventional methods, without carbonization or contamination of samples.

Rotor pro mikrovlnně asistované sušení: Rotor 1DRY

Rtuťové porozimetry: PoreMaster

Software pro částicovou analýzu: Kalliope™

Cora 7X00 Raman Spectrometer with Fiber-optic probe

Stolní Ramanovy spektrometry Cora 7X00

Top View mounted T-probe with Rotor 8N of Multiwave PRO.

T-probe

Tensile Stage: TS 600 - sample stage for in-situ X-ray diffraction studies of stress/strain phenomena in fibers, foils and thin films

Tahová cela: TS 600

Temperovaný autosampler: Xsample 610

Temperovaný autosampler: Xsample 630

Tester Micro Combi: MCT³

Tribometr Pin-on-Disk: TRB³

Ultra nanoindentační tester: UNHT³

Vakuové a průtokové odplynění: FloVac

Vakuové odplynění: XeriPrep

High Temperature Vacuum Tribometer

Vakuový tribometr: VTHT / VTRB

Viskozimetr s padající kuličkou: Lovis 2000 M/ME

Vysoko-teplotní ultra nanoindentace (UNHT³ HTV)

Temperature Tribometer

Vysokoteplotní tribometr: THT

HPA-S represents the ultimate performance in wet chemical high pressure digestion sample preparation for AAS, ICP and Voltammetry. The HPA-S acid digestion method is an internationally recognized reference procedure and is in operation as a high-performance routine instrument in numerous laboratories.

Vysokotlaký rozkladný systém: HPA-S

Zcela přizpůsobitelné řešení pro automatizaci laboratoře: HTX

Řada Ultrapyc

Zobrazení do z

Quantachrome Produkty

Anton Paar Aplikace

Concentration Measurement of Sodium Hydroxide Solutions by Refractive Index

Concentration Measurement of Sodium Hydroxide Solutions by Refractive Index

The concentration of sodium hydroxide in water can be easily and quickly determined by refractive index measurement.

Improve Digestion Quality and Save Money – Microwave Digestion rules out Open Digestion

Improve Digestion Quality and Save Money – Microwave Digestion rules out Open Digestion

Reliable elemental analysis results need robust sample preparation to destroy sample matrices or to separate matrix from analytes. The sample preparation step is by far the most error-prone and critical step of the analytical procedure.

Refractive Index Measurement of Ionic Liquids

Refractive Index Measurement of Ionic Liquids

Ionic liquids are special designer solvents as they are nonvolatile and liquid at ambient temperature, leading to a wide range of applications. Their refractive index helps to control the quality and also to characterize them.

Have a Good Trip

Have a Good Trip

Refractometers are widely used in the automotive industry, e.g. to control the quality of oils, chemical liquids and solids such as plastics and glasses.

Mesoporous thin films - Investigating the structure of multi-layered films by GISAXS

Mesoporous thin films - Investigating the structure of multi-layered films by GISAXS

Single- and double-layered mesoporous thin films have been analyzed by GISAXS for their structural properties using the SAXSpoint system.

Characterization of the scratch resistance of ceramic tiles

Characterization of the scratch resistance of ceramic tiles

High temperature tribological behavior of advanced hard coatings for cutting tools

High temperature tribological behavior of advanced hard coatings for cutting tools

High temperature tribological behavior of advanced hard coatings for cutting tools

The influence of Surface Roughness on Instrumented Indentation Testing (IIT)

The influence of Surface Roughness on Instrumented Indentation Testing (IIT)

In-Situ observation of the scratch/indentation true contact area to provide analysis without being model-dependent

In-Situ observation of the scratch/indentation true contact area to provide analysis without being model-dependent

Nanoindentation and Nanoscratch of Oxide Coatings on Thin Film Polymer Substrates

Nanoindentation and Nanoscratch of Oxide Coatings on Thin Film Polymer Substrates

Nanoindentation approach to mechanical testing of extremely soft materials

Nanoindentation approach to mechanical testing of extremely soft materials

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Review of Indenter Materials for High Temperature Nanoindentation

Review of Indenter Materials for High Temperature Nanoindentation

Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)

Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)

The Ultra Nanoindentation Tester: New generation of thermal drift free indentation

The Ultra Nanoindentation Tester: New generation of thermal drift free indentation

Applications of nanoindentation in biology and medicine

Applications of nanoindentation in biology and medicine

Nanoindentation for biological materials

Identifying three different particle sizes in one sample with DLS

Identifying three different particle sizes in one sample with DLS

Particle suspensions often contain more than one size of particle. However, many particle analyzers cannot resolve particle mixtures, instead they detect an average of all sizes. The Litesizer™ 500 can detect three sizes in one sample.

Nanoparticles for Ceramics: Size, Stability & pH

Nanoparticles for Ceramics: Size, Stability & pH

In nanoparticle suspensions that will be used in ceramics, particle size and stability are of vital importance. Suspension stability is essential to ensure that the particles to stay in suspension, and maintain constant particle size.

Temperature-dependent GISAXS studies on thin films

Temperature-dependent GISAXS studies on thin films

The temperature-induced decomposition of a thin film structure has been studied using the SAXSpoint system with the new temperature-controlled GISAXS stage.

An insight into the Structure of Copolymer Surfactants

An insight into the Structure of Copolymer Surfactants

The structure of inhomogeneous (core-shell) nanoparticles was studied with the SAXSpoint system. The internal structure of Pluronic P123 micelles in water was determined by calculating the radial electron density profile.

SAXSpoint with MetalJet Source

SAXSpoint with MetalJet Source

SAXSpoint now integrates the high-brightness MetalJet X-ray source enabling ultra-fast SAXS measurements in the laboratory.

In-situ GISAXS heating experiments on self-assembled Gold nanoparticles

In-situ GISAXS heating experiments on self-assembled Gold nanoparticles

Thermal morphology changes of self-assembled Gold nanoparticles have been studied using the SAXSpoint system with the temperature controlled GISAXS stage.

Coatings, Paints - Rheology of Paints and Coatings with the RheolabQC

Coatings, Paints - Rheology of Paints and Coatings with the RheolabQC

Rheological measurements are essential for quality control and research in the paints and coatings industry. The Anton Paar Rotational Rheometer RheolabQC is perfectly suited for such applications.

Webináře

Nabízíme vám velký, neustále se rozšiřující výběr webinářů o produktech, aplikacích a výzkumu.

Zobrazit nabídku webinářů