- Combining mechanical and dielectric spectroscopy
- Studying a material’s response to an applied electric field
- Gaining information on a material’s structure and behavior
The Dielectro-Rheological Device (DRD) combines rheology (as a mechanical spectroscopy method) and dielectric spectroscopy. Dielectric spectroscopy is an investigation technique based on the study of a material’s response to an applied electric field. The electric current flowing through a sample as a response to an alternating electric field is measured as a function of the field frequency. The interpretation of the obtained dielectric spectrum provides information on the structure and behavior of the analyzed material.
Extend your measurement capabilities
The DRD enables you to gain simultaneous measurement data from mechanical and dielectric spectroscopy. In addition to rheology, you can investigate the influence of mechanical deformation on the conductivity, capacity, and permittivity of the sample. It extends the measuring capabilities of your MCR rheometer to an extended measurable frequency range. It is also possible to perform stand-alone dielectric measurements.
Deeper insights into your sample’s behavior
The combination of mechanical and dielectric spectroscopy allows deeper insights into your sample’s behavior, e.g. detecting and monitoring structural changes in curing materials or temperature-related phase transitions. Benefit from this additional information to master your application challenges.
Typical samples and applications are filled polymers (e.g. an epoxy resin filled with carbon nanotubes) and polar materials (like PVA, PVC, PMMA).
Benefit from the modularity of the MCR rheometers
The DRD can be used within the unique temperature range from -160 °C to 600 °C. Depending on the needed temperature range and the application, one of the following suitable contact options can be used:
- Spring contact for rotational tests
- Wire-shaft contact for oscillatory tests
- Electrolyte contact in the range from -50 °C to 100 °C for oscillatory and rotational tests
The DRD can easily be mounted to a convection temperature device (CTD) and is available for measurements in single-drive and TwinDrive mode. Various LCR meters can be combined depending on the required dielectric measurement range. It is even combinable with the Digital Eye Camera in the CTD to record real-time pictures and videos of the sample.
Enjoy the convenient setup and ease of use
The RheoCompass™ software ensures flexible test programming in rotation and oscillation mode and synchronizes the LCR meter of the DRD with the MCRe via trigger impulse. Rheological and dielectric measurement data is displayed and analyzed in the software, including master curve generation. The patented Toolmaster™ feature automatically recognizes and configures all connected devices and measuring geometries.
|Technical Data||DRD Option P-PTD 200/DI||DRD Option CTD 180, CTD 450 TDR, CTD 600 MDR|
|Temperature range||-40 °C to 200 °C (CMT) |
Electrolyte contact -40 °C to 100 °C
|Spring and wire-shaft contact: |
-160 °C to 600 °C
(SMT, CMT, counter-rotation)
Electrolyte contact -50 °C to 100 °C
|Contact options||Spring contact |
|Spring contact |
|Min. measurable capacitance||Depending on used contact option and measuring temperature||Depending on used contact option and measuring temperature|
|Frequency range||Depending on the LCR meter||Depending on the LCR meter|
|Voltage range||Depending on the LCR meter||Depending on the LCR meter|
|Measuring systems||Parallel-plate (PP, made of titanium), disposable PP||Parallel-plate (PP, made of titanium), disposable PP|
Anton Paar Certified Service
- More than 350 manufacturer-certified technical experts worldwide
- Qualified support in your local language
- Protection for your investment throughout its lifecycle
- 3-year warranty
Combined rheological methods - From rheo-optics to magneto-rheology and beyond Application Reports
Dielectric Rheological Device Application Reports
Dielectric Spectroscopy Combined with High-Temperature Rheology Application Reports