Recommended Results

Ceramics

Ceramics

From the deformation behavior of structural and technical ceramics to the composition and stability of dental fixtures or whiteware: The analysis and characterization of ceramics calls for highly heat- and pressure-resistant solutions capable of simulating complex production and application procedures. Find the measuring instrument that meets your particular needs in the instrument list below – or let us help you find the best solution by contacting us directly.

Get in touch

Anton Paar Products

Your choice: Reset all filters X
Type of operation
Standards
Product Group
Device type
Showing to of

No results found!

Ball Mill BM500

Benchtop Heating Stage BTS 500

Benchtop Heating Stages: BTS 150 | BTS 500

Calotest Compact (CAT²c)

Calotest Industrial (CAT²i)

High-temperature chamber HTK 1200N for combined reflection and transmission XRD studies at high temperatures up to 1200 °C

Capillary Extension: HTK 1200N

Domed Hot Stage for Four-Circle Goniometers DHS 1100 with graphite dome for high-temperature X-ray studies of polycrystalline samples and thin films from 25 to 1100 °C

Domed Hot Stage for Four-Circle Goniometers: DHS 1100

Dynamic shear rheometer measuring head: DSR 502

Electrokinetic Analyzer for Routine Solid Surface Analysis: SurPASS™ 3 Eco

Electrokinetic Analyzer for Solid Surface Analysis: SurPASS™ 3

Furnace Rheometer Systems FRS 1600 and FRS 1800

HPA-S represents the ultimate performance in wet chemical high pressure digestion sample preparation for AAS, ICP and Voltammetry. The HPA-S acid digestion method is an internationally recognized reference procedure and is in operation as a high-performance routine instrument in numerous laboratories.

High Pressure Digestion: HPA-S High Pressure Asher

Temperature Tribometer

High Temperature Tribometer (THT)

High Temperature Ultra Nanoindentation (UNHT³ HTV)

High-Temperature Oven Chamber: HTK 1200N with a robust design for in-situ X-ray diffraction studies in different atmospheres up to 1200 °C

High-Temperature Oven Chamber: HTK 1200N

Inline Viscometers L-Vis 510 and 520 Ex

Inline Viscometer for Hazardous Areas: L-Vis 520 Ex

Inline Viscometer: L-Vis 510

Litesizer™ 100

Litesizer™ 500

Micro Scratch Tester (MST³)

Microindentation Tester (MHT³)

Rotor 16SOLV HF100 expands the possibilities of Multiwave PRO for the microwave-assisted digestion and extraction of inorganic and organic samples and is easily upgraded for acid digestion applications by interchanging screw caps.

Microwave Digestion and Extraction: Rotor 16SOLV HF100

Rotor 16SOLV MF100 expands the possibilities of Multiwave PRO for the microwave-assisted digestion and extraction of inorganic and organic samples and is easily upgraded for acid digestion applications by interchanging screw caps.

Microwave Digestion and Extraction: Rotor 16SOLV MF100

The acid digestion rotor 16HF100 with 16 high pressure vessels is designed for high sample throughput and efficient handling.

Microwave Digestion: Rotor 16HF100

Rotor 8EVAP is an innovative accessory for microwave evaporation with the modular Multiwave PRO microwave sample preparation system. It greatly simplifies and accelerates the microwave-assisted evaporation of acids and concentration of aqueous sample solutions in 8 vessels simultaneously.

Microwave Evaporation: Rotor 8EVAP

The Multiwave PRO microwave reaction system serves two groups: professionals in trace analysis and synthetic chemistry.

Microwave Reaction System: Multiwave PRO

Rotor 1DRY is the ideal accessory for efficient handling of samples prior to digestion. Microwave-assisted drying takes a quarter of the time required by conventional methods, without carbonization or contamination of samples.

Microwave-assisted Drying: Rotor 1DRY

Nano Scratch Tester (NST³)

Nanoindentation Tester (NHT³)

PC-controllable Alignment Stage

Penetrometer PNR 12 with accessories for cone penetration and needle penetration.

Penetrometer: PNR 12

The pressure sensor accessory allows for precise reaction control within the reference vessel of Rotor 16MF100 or Rotor 16HF100. The pressure data is transferred to the oven via infrared signal. If required, the pressure sensor accessory can be upgraded to a pressure/temperature sensor accessory.

Pressure Sensor Accessory

Revetest® Scratch Tester (RST³)

Rheometer: MCR 102, MCR 302, MCR 502

Rheometer: MCR 72 and MCR 92

The RheolabQC is the quality control rheometer from Anton Paar. RheolabQC with temperature device C-PTD 180/AIR/QC and with Flexible Cup Holder.

Rotational Rheometer: RheolabQC

Software for particle analysis: Kalliope™

Top View mounted T-probe with Rotor 8N of Multiwave PRO.

T-probe

TRB³: Pin-on-disk tribometer

Ultra Nanoindentation Tester (UNHT³)

High Temperature Vacuum Tribometer

Vacuum Tribometer (VTHT / VTRB)

Pressure/temperature sensor accessory for precise reaction control within the reference vessel of Rotor 16MF100 and/or Rotor 16HF100.

p/T Sensor Accessory

Showing to of

Anton Paar Applications

Characterization of the scratch resistance of ceramic tiles

Characterization of the scratch resistance of ceramic tiles

High temperature tribological behavior of advanced hard coatings for cutting tools

High temperature tribological behavior of advanced hard coatings for cutting tools

High temperature tribological behavior of advanced hard coatings for cutting tools

The influence of Surface Roughness on Instrumented Indentation Testing (IIT)

The influence of Surface Roughness on Instrumented Indentation Testing (IIT)

Characterization of thermal spray coatings by Instrumented Indentation and Scratch Testing (Part I)

Characterization of thermal spray coatings by Instrumented Indentation and Scratch Testing (Part I)

Characterization of thermal spray coatings by instrumented indentation and scratch testing Part II: Indentation of plasma sprayed coatings

Characterization of thermal spray coatings by instrumented indentation and scratch testing Part II: Indentation of plasma sprayed coatings

In-Situ observation of the scratch/indentation true contact area to provide analysis without being model-dependent

In-Situ observation of the scratch/indentation true contact area to provide analysis without being model-dependent

Mechanical properties of ultrananocrystalline diamond (UNCD) films with an influence of the nucleation density on the structure

Mechanical properties of ultrananocrystalline diamond (UNCD) films with an influence of the nucleation density on the structure

Nanoindentation approach to mechanical testing of extremely soft materials

Nanoindentation approach to mechanical testing of extremely soft materials

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Physical characterization of coated surfaces - Part II : Scratch Test

Physical characterization of coated surfaces - Part II : Scratch Test

Review of Indenter Materials for High Temperature Nanoindentation

Review of Indenter Materials for High Temperature Nanoindentation

Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)

Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)

The Ultra Nanoindentation Tester: New generation of thermal drift free indentation

The Ultra Nanoindentation Tester: New generation of thermal drift free indentation

Mechanical Properties of Cementitious Materials

Mechanical Properties of Cementitious Materials

Identifying three different particle sizes in one sample with DLS

Identifying three different particle sizes in one sample with DLS

Particle suspensions often contain more than one size of particle. However, many particle analyzers cannot resolve particle mixtures, instead they detect an average of all sizes. The Litesizer™ 500 can detect three sizes in one sample.

Nanoparticles for Ceramics: Size, Stability & pH

Nanoparticles for Ceramics: Size, Stability & pH

In nanoparticle suspensions that will be used in ceramics, particle size and stability are of vital importance. Suspension stability is essential to ensure that the particles to stay in suspension, and maintain constant particle size.

Temperature-dependent GISAXS studies on thin films

Temperature-dependent GISAXS studies on thin films

The temperature-induced decomposition of a thin film structure has been studied using the SAXSpoint system with the new temperature-controlled GISAXS stage.

Understanding Filter Efficiency - Virus Removal in Depth Filtration

Understanding Filter Efficiency - Virus Removal in Depth Filtration

Zeta potential, as the indicator for surface charge, helps to predict and to tune the efficiency of filter materials.

SAXSpoint with MetalJet Source

SAXSpoint with MetalJet Source

SAXSpoint now integrates the high-brightness MetalJet X-ray source enabling ultra-fast SAXS measurements in the laboratory.

Ceramics - Viscosity Measurement of Ceramic Slurries with the RheolabQC

Ceramics - Viscosity Measurement of Ceramic Slurries with the RheolabQC

The Anton Paar RheolabQC makes rheological checks routine and easy. Measurements of slurries in the ceramic industry describe important transport and processing behaviors.