Metals

Metals

The vast and diverse range of metals, compounds or alloys opens up countless application options and an equally large number of related analysis procedures. Count on Anton Paar’s high-end laboratory and process measurement solutions for material characterization, quality control, sample preparation and more.  Find the measuring instrument that meets your particular needs in the instrument list below – or let us help you find the best solution by contacting us directly.

Get in touch

Anton Paar Products

Your choice: Reset all filters X
Type of operation
Standards
Product group
Device type
Showing to of

No results found!

Automated representative sampler: Micro Rotary Riffler

Automated tap density analyzers: Autotap

Automatic Chemisorption Analyzers: ChemBET Pulsar

Ball Mill: BM500

Benchtop Heating Stage BTS 500

Benchtop Heating Stages: BTS 150 | BTS 500

Calotest Compact (CAT²c)

Calotest Industrial (CAT²i)

High-temperature chamber HTK 1200N for combined reflection and transmission XRD studies at high temperatures up to 1200 °C

Capillary Extension: HTK 1200N

Dynamic shear rheometer measuring head: DSR 502

Electrokinetic Analyzer for Routine Solid Surface Analysis: SurPASS™ 3 Eco

Electrokinetic Analyzer: SurPASS

Foam testing Pycnometer: PentaFoam

Furnace Rheometer Systems: FRS

Gas Pycnometer: PentaPyc

Gas sorption analyzer: autosorb IQ

Gas sorption analyzer: NOVAtouch

Gas sorption analyzer: QUADRASORB evo

HPA-S represents the ultimate performance in wet chemical high pressure digestion sample preparation for AAS, ICP and Voltammetry. The HPA-S acid digestion method is an internationally recognized reference procedure and is in operation as a high-performance routine instrument in numerous laboratories.

High Pressure Digestion: HPA-S

Temperature Tribometer

High Temperature Tribometer: THT

High Temperature Ultra Nanoindentation (UNHT³ HTV)

High-Pressure Chamber HPC 900 - high-pressure and high-temperature chamber for in-situ X-ray diffraction studies of gas-solid interactions

High-Pressure Chamber: HPC 900

High-Temperature Oven Chamber: HTK 1200N with a robust design for in-situ X-ray diffraction studies in different atmospheres up to 1200 °C

High-Temperature Oven Chamber: HTK 1200N

High-Temperature Strip Heater Chambers: HTK 16N | HTK 2000N

High-throughput gas sorption analyzer: autosorb 6iSA

Micro Scratch Tester: MST³

Microindentation Tester: MHT³

The acid digestion rotor 16HF100 with 16 high pressure vessels is designed for high sample throughput and efficient handling.

Microwave Digestion Rotor: 16HF100

The acid digestion rotor 16MF100 with 16 pressure vessels is designed for high sample throughput and efficient handling.

Microwave Digestion Rotor: 16MF100

Microwave digestion system: Multiwave GO Plus

Modular Compact Rheometer: MCR 102/302/502

Motorized alignment for XRD: z-alignment stage

Nano scratch tester: NST³

Nanoindentation tester: NHT³

Particle Size Analyzer: Litesizer 100

Particle Size Analyzer: Litesizer 500

Particle Size Analyzer: PSA

Pin-on-disk tribometer: TRB³

Porometer: Poremaster

Reactor Chamber: XRK 900

Reactor Chamber: XRK 900

Revetest® Scratch Tester: RST³

Perfect results with automatic cleaning and needle washing using up to three cleaning solvents.

Sample changer: Xsample 530

Software for particle analysis: Kalliope™

Surface Area Analyzer: AutoFlow BET+

Top View mounted T-probe with Rotor 8N of Multiwave PRO.

T-probe

Ultra nanoindentation tester: UNHT³

Ultrapyc series

Vacuum and Flow Degasser: FloVac

Vacuum Degasser: XeriPrep

High Temperature Vacuum Tribometer

Vacuum Tribometer: VTHT / VTRB

Vapor Sorption Analyzer: VSTAR

Showing to of

Anton Paar Applications

Corrosion Protection of Semi-Finished Products - Process Monitoring of the Oil-to-Solvent Ratio

Corrosion Protection of Semi-Finished Products - Process Monitoring of the Oil-to-Solvent Ratio

Relevant for semi-finished products in metal industry, steel, aluminium, copper and other metals

Anodizing of Aluminium - Acidic Process Monitoring

Anodizing of Aluminium - Acidic Process Monitoring

Relevant for surface technology, treatment of aluminium products

Improve Digestion Quality and Save Money – Microwave Digestion rules out Open Digestion

Improve Digestion Quality and Save Money – Microwave Digestion rules out Open Digestion

Reliable elemental analysis results need robust sample preparation to destroy sample matrices or to separate matrix from analytes. The sample preparation step is by far the most error-prone and critical step of the analytical procedure.

Can I Monitor the Composition of my Pickling Bath?

Can I Monitor the Composition of my Pickling Bath?

Relevant for steel, aluminium, semiconductors, electronics

Characterization of the scratch resistance of ceramic tiles

Characterization of the scratch resistance of ceramic tiles

High temperature tribological behavior of advanced hard coatings for cutting tools

High temperature tribological behavior of advanced hard coatings for cutting tools

High temperature tribological behavior of advanced hard coatings for cutting tools

The influence of Surface Roughness on Instrumented Indentation Testing (IIT)

The influence of Surface Roughness on Instrumented Indentation Testing (IIT)

Characterization of thermal spray coatings by Instrumented Indentation and Scratch Testing (Part I)

Characterization of thermal spray coatings by Instrumented Indentation and Scratch Testing (Part I)

Characterization of thermal spray coatings by instrumented indentation and scratch testing Part II: Indentation of plasma sprayed coatings

Characterization of thermal spray coatings by instrumented indentation and scratch testing Part II: Indentation of plasma sprayed coatings

In-Situ observation of the scratch/indentation true contact area to provide analysis without being model-dependent

In-Situ observation of the scratch/indentation true contact area to provide analysis without being model-dependent

Mechanical properties of ultrananocrystalline diamond (UNCD) films with an influence of the nucleation density on the structure

Mechanical properties of ultrananocrystalline diamond (UNCD) films with an influence of the nucleation density on the structure

Nanoindentation approach to mechanical testing of extremely soft materials

Nanoindentation approach to mechanical testing of extremely soft materials

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Physical characterization of coated surfaces - Part II : Scratch Test

Physical characterization of coated surfaces - Part II : Scratch Test

Review of Indenter Materials for High Temperature Nanoindentation

Review of Indenter Materials for High Temperature Nanoindentation

Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)

Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)

The Ultra Nanoindentation Tester: New generation of thermal drift free indentation

The Ultra Nanoindentation Tester: New generation of thermal drift free indentation

Gold nanoparticles: Size matters, and so does stability

Gold nanoparticles: Size matters, and so does stability

Gold nanoparticles are now used in many fields, from medicine to electronics, but each application has specific particle-size and stability requirements. Gold nanoparticles can be easily monitored with the Litesizer™ 500.

Application GUM: Quality Control of Lamination Oil

Application GUM: Quality Control of Lamination Oil

To assure stainless products it is relevant for the aluminum industry to verify if lubricating oil is contaminating their lamination oil.

Identifying three different particle sizes in one sample with DLS

Identifying three different particle sizes in one sample with DLS

Particle suspensions often contain more than one size of particle. However, many particle analyzers cannot resolve particle mixtures, instead they detect an average of all sizes. The Litesizer™ 500 can detect three sizes in one sample.

Temperature-dependent GISAXS studies on thin films

Temperature-dependent GISAXS studies on thin films

The temperature-induced decomposition of a thin film structure has been studied using the SAXSpoint system with the new temperature-controlled GISAXS stage.

SAXSpoint with MetalJet Source

SAXSpoint with MetalJet Source

SAXSpoint now integrates the high-brightness MetalJet X-ray source enabling ultra-fast SAXS measurements in the laboratory.