Ceramics

Ceramics

From the deformation behavior of structural and technical ceramics to the composition and stability of dental fixtures or whiteware: The analysis and characterization of ceramics calls for highly heat- and pressure-resistant solutions capable of simulating complex production and application procedures. Find the measuring instrument that meets your particular needs in the instrument list below – or let us help you find the best solution by contacting us directly.

Get in touch

Anton Paar Products

Your choice: Reset all filters X
Type of operation
Standards
Product group
Device type
Showing to of

No results found!

Automated flow chemisorption analyzer: ChemBET Pulsar

Automated representative sampler: Micro Rotary Riffler

Automated tapped density analyzers: Autotap

Ball mill: BM500

Benchtop Heating Stage BTS 500

Benchtop Heating Stages: BTS 150 | BTS 500

High-temperature chamber HTK 1200N for combined reflection and transmission XRD studies at high temperatures up to 1200 °C

Capillary Extension: HTK 1200N

Coating thickness measurement: Calotest series

Domed Hot Stage for Four-Circle Goniometers DHS 1100 with graphite dome for high-temperature X-ray studies of polycrystalline samples and thin films from 25 to 1100 °C

Domed Hot Stage for Four-Circle Goniometers: DHS 1100

Dynamic shear rheometer measuring head: DSR 502

Five-station gas pycnometers for true density: PentaPyc and PentaFoam 5200e

Gas sorption analyzer: QUADRASORB evo

Temperature Tribometer

High Temperature Tribometer: THT

High temperature viscometer and rheometer: FRS

High-Temperature Oven Chamber: HTK 1200N with a robust design for in-situ X-ray diffraction studies in different atmospheres up to 1200 °C

High-Temperature Oven Chamber: HTK 1200N

Inline density meter: L‑Dens 7000 series

Inline viscometer: L-Vis

Mercury intrusion pore size analyzers: PoreMaster

Micropore physi-/chemisorption analyzers: autosorb iQ

Microwave Digestion System: Multiwave 7000

Microwave digestion system: Multiwave GO Plus

Microwave reaction platform: Multiwave 5000

Modular Compact Rheometer: MCR 72/92

Modular Compact Rheometer: MCR 102e/302e/502e

Motorized alignment for XRD: z-alignment stage

Nano scratch tester: NST³

Nanoindentation tester: NHT³

Particle size analyzer: Litesizer

Particle size analyzer: PSA

Penetrometer PNR 12 with accessories for cone penetration and needle penetration.

Penetrometer: PNR 12

Pin-on-disk tribometer: TRB³

Revetest® Scratch Tester: RST³

The RheolabQC is the quality control rheometer from Anton Paar. RheolabQC with temperature device C-PTD 180/AIR/QC and with Flexible Cup Holder.

Rotational Rheometer: RheolabQC

Single-station gas pycnometers for true density: Ultrapyc

Software for particle analysis: Kalliope™

Surface area analyzer: AutoFlow BET+

Surface area and pore size analyzers: NOVAtouch

Ultra nanoindentation tester: UNHT³

Vacuum and Flow Degasser: FloVac

Vacuum Degasser: XeriPrep

High Temperature Vacuum Tribometer

Vacuum Tribometer: VTHT / VTRB

Vapor sorption volumetric gas sorption analyzer: VSTAR

Showing to of

Quantachrome Products

Anton Paar Applications

Characterization of the scratch resistance of ceramic tiles

Characterization of the scratch resistance of ceramic tiles

High temperature tribological behavior of advanced hard coatings for cutting tools

High temperature tribological behavior of advanced hard coatings for cutting tools

High temperature tribological behavior of advanced hard coatings for cutting tools

The influence of Surface Roughness on Instrumented Indentation Testing (IIT)

The influence of Surface Roughness on Instrumented Indentation Testing (IIT)

Characterization of thermal spray coatings by Instrumented Indentation and Scratch Testing (Part I)

Characterization of thermal spray coatings by Instrumented Indentation and Scratch Testing (Part I)

Characterization of thermal spray coatings by instrumented indentation and scratch testing Part II: Indentation of plasma sprayed coatings

Characterization of thermal spray coatings by instrumented indentation and scratch testing Part II: Indentation of plasma sprayed coatings

In-Situ observation of the scratch/indentation true contact area to provide analysis without being model-dependent

In-Situ observation of the scratch/indentation true contact area to provide analysis without being model-dependent

Mechanical properties of ultrananocrystalline diamond (UNCD) films with an influence of the nucleation density on the structure

Mechanical properties of ultrananocrystalline diamond (UNCD) films with an influence of the nucleation density on the structure

Nanoindentation approach to mechanical testing of extremely soft materials

Nanoindentation approach to mechanical testing of extremely soft materials

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Physical characterization of coated surfaces - Part II : Scratch Test

Physical characterization of coated surfaces - Part II : Scratch Test

Review of Indenter Materials for High Temperature Nanoindentation

Review of Indenter Materials for High Temperature Nanoindentation

Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)

Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)

The Ultra Nanoindentation Tester: New generation of thermal drift free indentation

The Ultra Nanoindentation Tester: New generation of thermal drift free indentation

Mechanical Properties of Cementitious Materials

Mechanical Properties of Cementitious Materials

Identifying three different particle sizes in one sample with DLS

Identifying three different particle sizes in one sample with DLS

Particle suspensions often contain more than one size of particle. However, many particle analyzers cannot resolve particle mixtures, instead they detect an average of all sizes. The Litesizer™ 500 can detect three sizes in one sample.

Nanoparticles for Ceramics: Size, Stability & pH

Nanoparticles for Ceramics: Size, Stability & pH

In nanoparticle suspensions that will be used in ceramics, particle size and stability are of vital importance. Suspension stability is essential to ensure that the particles to stay in suspension, and maintain constant particle size.

Temperature-dependent GISAXS studies on thin films

Temperature-dependent GISAXS studies on thin films

The temperature-induced decomposition of a thin film structure has been studied using the SAXSpoint system with the new temperature-controlled GISAXS stage.

Understanding Filter Efficiency - Virus Removal in Depth Filtration

Understanding Filter Efficiency - Virus Removal in Depth Filtration

Zeta potential, as the indicator for surface charge, helps to predict and to tune the efficiency of filter materials.

SAXSpoint with MetalJet Source

SAXSpoint with MetalJet Source

SAXSpoint now integrates the high-brightness MetalJet X-ray source enabling ultra-fast SAXS measurements in the laboratory.

Ceramics - Viscosity Measurement of Ceramic Slurries with the RheolabQC

Ceramics - Viscosity Measurement of Ceramic Slurries with the RheolabQC

The Anton Paar RheolabQC makes rheological checks routine and easy. Measurements of slurries in the ceramic industry describe important transport and processing behaviors.

Webinars

We offer you a great and constantly growing choice of live webinars and recordings on products, applications, and scientific topics.

View webinars