non metals

Non Metals

The vast and diverse range of so-called non-metals opens up countless application options and an equally large number of related analysis procedures. Count on Anton Paar’s high-end laboratory measurement solutions for material characterization, quality control, sample preparation and more.  Find the measuring instrument that meets your particular needs in the instrument list below – or let us help you find the best solution by contacting us directly.

Get in touch

Anton Paar Products

Your choice: Reset all filters X
Type of operation
Standards
Product group
Device type
Showing to of

No results found!

Automated flow chemisorption analyzer: ChemBET Pulsar

Automated representative sampler: Micro Rotary Riffler

Automated tapped density analyzers: Autotap

Benchtop Heating Stage BTS 500

Benchtop Heating Stages: BTS 150 | BTS 500

High-temperature chamber HTK 1200N for combined reflection and transmission XRD studies at high temperatures up to 1200 °C

Capillary Extension: HTK 1200N

Coating thickness measurement: Calotest series

Compact Raman spectrometers: Cora 5001

Cryo & Humidity Chamber CHC plus+ is a unique combination of the multi-purpose CHC Cryo & Humidity Chamber and an advanced humidity (RH) generator for the analysis of humidity-dependent and/or temperature-dependent structural changes in materials using X-ray diffraction

Cryo & Humidity Chamber: CHC plus⁺

Dynamic shear rheometer measuring head: DSR 502

Five-station gas pycnometers for true density: PentaPyc and PentaFoam 5200e

Gas sorption analyzer: QUADRASORB evo

Temperature Tribometer

High Temperature Tribometer: THT

High-pressure volumetric gas sorption analyzer: iSorb HP

High-Temperature Oven Chamber: HTK 1200N with a robust design for in-situ X-ray diffraction studies in different atmospheres up to 1200 °C

High-Temperature Oven Chamber: HTK 1200N

High-Temperature Strip Heater Chambers: HTK 16N | HTK 2000N

Hot block digestion system: Multicube 48

Low-Temperature Chamber: TTK 600

Mercury intrusion pore size analyzers: PoreMaster

Micropore physi-/chemisorption analyzers: autosorb iQ

Microwave Digestion System: Multiwave 7000

Microwave digestion system: Multiwave GO Plus

Microwave reaction platform: Multiwave 5000

Modular Compact Rheometer: MCR 102e/302e/502e

Motorized alignment for XRD: z-alignment stage

Nano scratch tester: NST³

Nanoindentation tester: NHT³

Penetrometer PNR 12 with accessories for cone penetration and needle penetration.

Penetrometer: PNR 12

Pin-on-disk tribometer: TRB³

Reactor Chamber: XRK 900

Reactor Chamber: XRK 900

Revetest® Scratch Tester: RST³

The RheolabQC is the quality control rheometer from Anton Paar. RheolabQC with temperature device C-PTD 180/AIR/QC and with Flexible Cup Holder.

Rotational Rheometer: RheolabQC

Single-station gas pycnometers for true density: Ultrapyc

Software for particle analysis: Kalliope™

Surface area analyzer: AutoFlow BET+

Surface area and pore size analyzers: NOVAtouch

Ultra nanoindentation tester: UNHT³

Vacuum and Flow Degasser: FloVac

Vacuum Degasser: XeriPrep

High Temperature Vacuum Tribometer

Vacuum Tribometer: VTHT / VTRB

Vapor sorption volumetric gas sorption analyzer: VSTAR

Showing to of

Quantachrome Products

Anton Paar Applications

Improve Digestion Quality and Save Money – Microwave Digestion rules out Open Digestion

Improve Digestion Quality and Save Money – Microwave Digestion rules out Open Digestion

Reliable elemental analysis results need robust sample preparation to destroy sample matrices or to separate matrix from analytes. The sample preparation step is by far the most error-prone and critical step of the analytical procedure.

Characterization of the scratch resistance of ceramic tiles

Characterization of the scratch resistance of ceramic tiles

High temperature tribological behavior of advanced hard coatings for cutting tools

High temperature tribological behavior of advanced hard coatings for cutting tools

High temperature tribological behavior of advanced hard coatings for cutting tools

The influence of Surface Roughness on Instrumented Indentation Testing (IIT)

The influence of Surface Roughness on Instrumented Indentation Testing (IIT)

Characterization of thermal spray coatings by Instrumented Indentation and Scratch Testing (Part I)

Characterization of thermal spray coatings by Instrumented Indentation and Scratch Testing (Part I)

Characterization of thermal spray coatings by instrumented indentation and scratch testing Part II: Indentation of plasma sprayed coatings

Characterization of thermal spray coatings by instrumented indentation and scratch testing Part II: Indentation of plasma sprayed coatings

Nanoindentation and Nanoscratch of Oxide Coatings on Thin Film Polymer Substrates

Nanoindentation and Nanoscratch of Oxide Coatings on Thin Film Polymer Substrates

Mechanical properties of ultrananocrystalline diamond (UNCD) films with an influence of the nucleation density on the structure

Mechanical properties of ultrananocrystalline diamond (UNCD) films with an influence of the nucleation density on the structure

Nanoindentation approach to mechanical testing of extremely soft materials

Nanoindentation approach to mechanical testing of extremely soft materials

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Physical characterization of coated surfaces - Part II : Scratch Test

Physical characterization of coated surfaces - Part II : Scratch Test

Review of Indenter Materials for High Temperature Nanoindentation

Review of Indenter Materials for High Temperature Nanoindentation

Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)

Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)

The Ultra Nanoindentation Tester: New generation of thermal drift free indentation

The Ultra Nanoindentation Tester: New generation of thermal drift free indentation

Identifying three different particle sizes in one sample with DLS

Identifying three different particle sizes in one sample with DLS

Particle suspensions often contain more than one size of particle. However, many particle analyzers cannot resolve particle mixtures, instead they detect an average of all sizes. The Litesizer™ 500 can detect three sizes in one sample.

Nanoparticles for Ceramics: Size, Stability & pH

Nanoparticles for Ceramics: Size, Stability & pH

In nanoparticle suspensions that will be used in ceramics, particle size and stability are of vital importance. Suspension stability is essential to ensure that the particles to stay in suspension, and maintain constant particle size.

Detection of Native Oxide on Silicon Nitride Wafers

Detection of Native Oxide on Silicon Nitride Wafers

The zeta potential is a very sensitive parameter to detect traces of impurities on solid surfaces and their removal during surface cleaning.

Webinars

We offer you a great and constantly growing choice of live webinars and recordings on products, applications, and scientific topics.

View webinars