Non Metals
The vast and diverse range of so-called non-metals opens up countless application options and an equally large number of related analysis procedures. Count on Anton Paar’s high-end laboratory measurement solutions for material characterization, quality control, sample preparation and more. Find the measuring instrument that meets your particular needs in the instrument list below – or let us help you find the best solution by contacting us directly.
Anton Paar Products
Automated flow chemisorption analyzer: ChemBET Pulsar
Automated Multipurpose Powder X-Ray Diffractometer: XRDynamic 500
Automated representative sampler: Micro Rotary Riffler
Automated tapped density analyzers: Autotap
Benchtop Heating Stages: BTS 150 | BTS 500
Capillary Extension: HTK 1200N
Coating thickness measurement: Calotest series
Compact Raman spectrometers: Cora 5001
Cryo & Humidity Chamber: CHC plus⁺
Dynamic shear rheometer measuring head: DSR 502
Five-station gas pycnometers for true density: PentaPyc and PentaFoam
Gas sorption analyzer: QUADRASORB evo
High Temperature Tribometer: THT
High vacuum physisorption/chemisorption analyzers: autosorb iQ
High-pressure volumetric gas sorption analyzer: iSorb
High-Temperature Strip Heater Chambers: HTK 16N | HTK 2000N
Hot block digestion system: Multicube 48
Low-Temperature Chamber: TTK 600
Mercury intrusion pore size analyzers: PoreMaster
Microwave digestion platform: Multiwave 5000
Microwave digestion system: Multiwave 7000
Microwave digestion system: Multiwave GO Plus
Modular Compact Rheometer: MCR 102e/302e/502e
Motorized alignment for XRD: z-alignment stage
Nano scratch tester: NST³
Nanoindentation tester: NHT³
Penetrometer: PNR 12
Pin-on-disk tribometer: TRB³
Reactor Chamber: XRK 900
Revetest® Scratch Tester: RST³
Rotational Rheometer: RheolabQC
Single-station gas pycnometers for true density: Ultrapyc
Software for particle analysis: Kalliope™
Surface area analyzer: AutoFlow BET+
Ultra nanoindentation tester: UNHT³
Vacuum and Flow Degasser: FloVac
Vacuum Degasser: XeriPrep
Vacuum Tribometer: TRB V / THT V
Vapor sorption volumetric gas sorption analyzer: VSTAR
XRD software: XRDanalysis
Anton Paar Applications
Improve Digestion Quality and Save Money – Microwave Digestion rules out Open Digestion
Reliable elemental analysis results need robust sample preparation to destroy sample matrices or to separate matrix from analytes. The sample preparation step is by far the most error-prone and critical step of the analytical procedure.
Characterization of the scratch resistance of ceramic tiles
High temperature tribological behavior of advanced hard coatings for cutting tools
High temperature tribological behavior of advanced hard coatings for cutting tools
The influence of Surface Roughness on Instrumented Indentation Testing (IIT)
Characterization of thermal spray coatings by Instrumented Indentation and Scratch Testing (Part I)
Characterization of thermal spray coatings by instrumented indentation and scratch testing Part II: Indentation of plasma sprayed coatings
Nanoindentation and Nanoscratch of Oxide Coatings on Thin Film Polymer Substrates
Mechanical properties of ultrananocrystalline diamond (UNCD) films with an influence of the nucleation density on the structure
Nanoindentation approach to mechanical testing of extremely soft materials
Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber
Physical characterization of coated surfaces - Part II : Scratch Test
Review of Indenter Materials for High Temperature Nanoindentation
Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)
The Ultra Nanoindentation Tester: New generation of thermal drift free indentation
Identifying three different particle sizes in one sample with DLS
Particle suspensions often contain more than one size of particle. However, many particle analyzers cannot resolve particle mixtures, instead they detect an average of all sizes. The Litesizer™ 500 can detect three sizes in one sample.
Nanoparticles for Ceramics: Size, Stability & pH
In nanoparticle suspensions that will be used in ceramics, particle size and stability are of vital importance. Suspension stability is essential to ensure that the particles to stay in suspension, and maintain constant particle size.
Detection of Native Oxide on Silicon Nitride Wafers
The zeta potential is a very sensitive parameter to detect traces of impurities on solid surfaces and their removal during surface cleaning.
Webinars
We offer you a great and constantly growing choice of live webinars and recordings on products, applications, and scientific topics.
View webinars