Ceramics

세라믹

구조 및 기술 세라믹의 변형 작용에서 치과 고정체 또는 도자기의 구성 및 안정도까지: 세라믹의 분석 및 특성에는 복잡한 생산 및 응용 절차를 시뮬레이션할 수 있는 고열 및 내압 솔루션이 요구됩니다. 아래 기기 목록에서 여러분의 특정 요구에 맞는 계측 기기를 찾아보십시오. 또는 Anton Paar에 직접 연락하시면 최적의 솔루션을 찾을 수 있도록 도와드리겠습니다.

문의하기

Anton Paar 제품

선택: 모든 필터 재설정 X
작업 유형
표준
제품 그룹
장치 유형
표시 - /

결과가 없습니다!

Pin-on-Disk 트라이보미터: TRB³

Revetest® 스크래치 테스터: RST³

XRD 소프트웨어 : XRDanalysis 분석 소프트웨어

XRD용 전동 얼라인먼트: z-얼라인먼트 스테이지

고온 점도계 및 레오미터 : FRS

Temperature Tribometer

고온 트라이보미터: THT

고진공 물리흡착/화학흡착 분석기 : autosorb iQ

기체 흡착 분석기: QUADRASORB evo

나노 스크래치 테스터: NST³

나노인덴테이션 시험기: Hit 300

나노인덴테이션 테스터: NHT³

동적 전단 레오미터 측정 헤드: DSR 502

마이크로웨이브 반응 플랫폼: Multiwave 5000

마이크로파 분해 시스템: Multiwave 7000

마이크로파 분해 시스템: Multiwave GO Plus

모듈식 소형 레오미터 : MCR 102e/302e/502e

모듈식 소형 레오미터: MCR 72/92

High-temperature chamber HTK 1200N for combined reflection and transmission XRD studies at high temperatures up to 1200 °C

모세관 팽창: HTK 1200N

Domed Hot Stage for Four-Circle Goniometers DHS 1100 with graphite dome for high-temperature X-ray studies of polycrystalline samples and thin films from 25 to 1100 °C

사차원 고니오미터용 돔형 고온 스테이지: DHS 1100

수은 압입 기공 크기 분석기: PoreMaster

울트라 나노인덴테이션 테스터: UNHT³

인라인 밀도계: L-Dens 7000 series

인라인 점도계: L-Vis

입도 분석기: Litesizer

입도 분석기: PSA

입자 분석용 소프트웨어: Kalliope™

자동 대표 시료 주입기: Micro Rotary Riffler

자동 탭 밀도 분석기: Autotap

자동 흐름 화학흡착 분석기: ChemBET Pulsar

전자동 다목적 X 선 회절 분석기 : XRDynamic 500

증기 흡착 부피 측정식 가스 흡착 분석기: VSTAR

진공 및 흐름 탈기 장치: FloVac

진공 탈기 장치: XeriPrep

High Temperature Vacuum Tribometer

진공 트라이보미터: TRB V / THT V

진밀도 측정을 위한 5 스테이션 가스 피크노미터: PentaPyc 및 PentaFoam

진밀도 측정을 위한 가스 피크노피터: Ultrapyc

Penetrometer PNR 12 with accessories for cone penetration and needle penetration.

침입도 시험기: PNR 12

코팅 두께 측정: Calotest 시리즈

Benchtop Heating Stage BTS 500

테이블형 가열 스테이지: BTS 150 | BTS 500

표면적 분석기: AutoFlow BET+

The RheolabQC is the quality control rheometer from Anton Paar. RheolabQC with temperature device C-PTD 180/AIR/QC and with Flexible Cup Holder.

회전형 레오미터: RheolabQC

표시 - /

Anton Paar 응용 분야

Characterization of the scratch resistance of ceramic tiles

Characterization of the scratch resistance of ceramic tiles

High temperature tribological behavior of advanced hard coatings for cutting tools

High temperature tribological behavior of advanced hard coatings for cutting tools

High temperature tribological behavior of advanced hard coatings for cutting tools

The influence of Surface Roughness on Instrumented Indentation Testing (IIT)

The influence of Surface Roughness on Instrumented Indentation Testing (IIT)

Characterization of thermal spray coatings by Instrumented Indentation and Scratch Testing (Part I)

Characterization of thermal spray coatings by Instrumented Indentation and Scratch Testing (Part I)

Characterization of thermal spray coatings by instrumented indentation and scratch testing Part II: Indentation of plasma sprayed coatings

Characterization of thermal spray coatings by instrumented indentation and scratch testing Part II: Indentation of plasma sprayed coatings

In-Situ observation of the scratch/indentation true contact area to provide analysis without being model-dependent

In-Situ observation of the scratch/indentation true contact area to provide analysis without being model-dependent

Mechanical properties of ultrananocrystalline diamond (UNCD) films with an influence of the nucleation density on the structure

Mechanical properties of ultrananocrystalline diamond (UNCD) films with an influence of the nucleation density on the structure

Nanoindentation approach to mechanical testing of extremely soft materials

Nanoindentation approach to mechanical testing of extremely soft materials

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Physical characterization of coated surfaces - Part II : Scratch Test

Physical characterization of coated surfaces - Part II : Scratch Test

Review of Indenter Materials for High Temperature Nanoindentation

Review of Indenter Materials for High Temperature Nanoindentation

Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)

Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)

The Ultra Nanoindentation Tester: New generation of thermal drift free indentation

The Ultra Nanoindentation Tester: New generation of thermal drift free indentation

Mechanical Properties of Cementitious Materials

Mechanical Properties of Cementitious Materials

Identifying three different particle sizes in one sample with DLS

Identifying three different particle sizes in one sample with DLS

Particle suspensions often contain more than one size of particle. However, many particle analyzers cannot resolve particle mixtures, instead they detect an average of all sizes. The Litesizer™ 500 can detect three sizes in one sample.

Nanoparticles for Ceramics: Size, Stability & pH

Nanoparticles for Ceramics: Size, Stability & pH

In nanoparticle suspensions that will be used in ceramics, particle size and stability are of vital importance. Suspension stability is essential to ensure that the particles to stay in suspension, and maintain constant particle size.

Temperature-dependent GISAXS studies on thin films

Temperature-dependent GISAXS studies on thin films

The temperature-induced decomposition of a thin film structure has been studied using the SAXSpoint system with the new temperature-controlled GISAXS stage.

Understanding Filter Efficiency - Virus Removal in Depth Filtration

Understanding Filter Efficiency - Virus Removal in Depth Filtration

Zeta potential, as the indicator for surface charge, helps to predict and to tune the efficiency of filter materials.

SAXSpoint with MetalJet Source

SAXSpoint with MetalJet Source

SAXSpoint now integrates the high-brightness MetalJet X-ray source enabling ultra-fast SAXS measurements in the laboratory.

Ceramics - Viscosity Measurement of Ceramic Slurries with the RheolabQC

Ceramics - Viscosity Measurement of Ceramic Slurries with the RheolabQC

The Anton Paar RheolabQC makes rheological checks routine and easy. Measurements of slurries in the ceramic industry describe important transport and processing behaviors.

웨비나

응용 분야 및 과학 주제에 대한 라이브 웨비나 및 녹화본을 지속적으로 다양하게 제공합니다.

웨비나 보기