Dynamic shear rheometer:
- The asphalt rheometer for quality control and routine measurements of asphalt and bitumen
- Illuminated sample area for perfect trimming results
- Air-cooled Cool Peltier temperature accessory makes thermostats obsolete
- The asphalt rheometer for research and development of asphalt and bitumen
- Patented features like TruGap™ (automatic gap measurement) and T-Ready™ (automatic sample temperature detection ) included
- Suitable also for measurements of rubber-modified bitumen and at low-temperatures of down to -30 °C
The dynamic shear rheometers (DSR) SmartPave 92 and SmartPave 102 allow precise measurements on asphalt binder and bitumen. Features such as Toolmaster™, QuickConnect, a Peltier temperature device for dry sample heating, and step-by-step instructions for measuring procedures according to AASHTO T315, AASHTO T350, AASHTO TP101, ASTM D7175, ASTM D7405, and DIN EN 14770 guarantee the most convenient operation. For measurements according to AASHTO T316, ASTM D4402, and DIN EN 13302 both instruments can be equipped with a Peltier-temperature-controlled measurement chamber for concentric cylinder geometries.
Two models to cover the whole spectrum of rheological asphalt and bitumen testing
The well-established SmartPave dynamic shear rheometers are able to analyze unmodified as well as modified asphalt binder and bitumen in a wide temperature range, either according to standards or with classic rheological methods. While SmartPave 102 is the instrument which meets the highest measurement demands, SmartPave 92 is designed especially for the demands of quality control and routine measurements in asphalt test labs.
The RheoCompass™ software: new paths for asphalt and bitumen testing
RheoCompass™ is a navigation tool that gives you the complete overview as well as the exact insights you require. It contains numerous templates that are tailored specifically to the needs of the asphalt industry. The predefined test procedures contain step-by-step instructions for all test types as defined by AASHTO, ASTM, DIN EN, and FGSV.
Unique accessories for easy handling
SmartPave 92’s and SmartPave 102’s unique temperature control unit is the first Peltier heating system with heating elements above and below the sample. Furthermore, the instruments feature Toolmaster™ – the only completely contact-free automatic tool recognition and configuration system for rheometers. It recognizes measuring systems and temperature control units as soon as they are connected to the rheometer so you don’t need to enter any data manually.
Fully automatic temperature calibration
Anton Paar offers fully automatic temperature calibration and verification routines in the RheoCompass™ software. Temperature accuracy and stability are crucial in asphalt testing. The unique automatic temperature calibration routine ensures temperature gradients <0.1 °C.
Experienced experts close to you
Anton Paar’s worldwide service network ensures that an expert on your system is always close by. Numerous installed instruments around the globe, an extensive application database, and cooperation with civil engineering institutes confirm that Anton Paar is the first choice for answering any rheological question on your asphalt binder and bitumen you might have.
|Technical Data|| SmartPave 92 || SmartPave 102 |
|Maximum torque||125 mNm||200 mNm|
|Min. torque (rotation)||1 µNm||5 nNm|
|Min. torque (oscillation)||1 µNm||2 nNm|
|Torque resolution||100 nNm||0.5 nNm|
|Angular deflection |
|1 µrad to ∞ µrad||1 µrad to ∞ µrad|
|Angular resolution||614 nrad||10 nrad|
|Min. angular velocity||10-4 rad/s||10-8 rad/s|
|Max. angular velocity||157 rad/s||314 rad/s|
|Max. speed||1500 1/min||3000 1/min|
|Min. angular frequency||10-4 rad/s||10-7 rad/s|
|Max. angular frequency||628 rad/s||628 rad/s|
|Normal force range||–||0.01 N to 50 N|
|Normal force resolution||–||1 mN|
|Max. temperature range||-5 °C to +200 °C||-40 °C to +200 °C|
|Automatic gap setting (AGC/AGS)||Yes||Yes|
|TruGap™ (innovative system for measuring the gap)||No||Yes|
|T-Ready™ (automatically detects and transmits the sample temperature)||No||Yes|
|Normal force and velocity profiles, tack, squeeze||No||Yes|
|AASHTO T315 / ASTM D7175 |
|AASHTO T316 / ASTM D4402 |
DIN EN 13302 & 13702
|AASHTO T350 / ASTM D7405 |
DIN EN 16659
|AASHTO TP101-UL (LAS-Test)||No||Yes|
|FGSV AL 720 BTSV |
FGSV AL 721 (Constant Shear Rate)
FGSV AL 722 (Temperature Sweep)
FGSV AL 723 (MSCR-Test)
|Measurement of rubber-modified bitumen||No||Yes|
|Low-temperature measurements -30°C (parallel plate)||No||Yes|
|Low-temperature measurements -20°C (torsion)||No||Yes|
AAASHTO T315 "SHRP-Test"
AASHTO T350 "MCSR-Test"
AASHTO TP101 "LAS-Test"
AASHTO TP123 BYET
ASTM D7175 "SHRP-Test"
ASTM D7405 "MSCR-Test"
DDIN EN 13302
DIN EN 14770
DIN EN 16659 "MSCR-Test"
DIN EN 103702
FFGSV AL 720 BTSV
FGSV AL 721 Constant Shear Rate
FGSV AL 722 Temperature Sweep
FGSV AL 723 MSCR-Test
Anton Paar Certified Service
- More than 350 manufacturer-certified technical experts worldwide
- Qualified support in your local language
- Protection for your investment throughout its lifecycle
- 3-year warranty
Addressing the Low-Temperature Behavior of Bitumen with the DSR Application Reports en
Behavior of bitumen in the temperature range of -6 °C to +90 °C Application Reports en