Dynamic shear rheometer:
SmartPave
-
-
-
- +2
- 360°
- The asphalt rheometer for quality control and routine measurements of asphalt and bitumen
- Illuminated sample area for perfect trimming results
- Air-cooled Cool Peltier temperature accessory renders thermostats obsolete
The dynamic shear rheometers (DSR) SmartPave 92 and SmartPave 102e allow precise measurements on asphalt binder and bitumen. Features such as Toolmaster™, QuickConnect, a Peltier temperature device for dry sample heating, and step-by-step instructions for measuring procedures according to AASHTO T315, AASHTO T350, AASHTO TP101, ASTM D7175, ASTM D7405, and DIN EN 14770 guarantee the most convenient operation. For measurements according to AASHTO T316, ASTM D4402, and DIN EN 13302, both instruments can be equipped with a Peltier-temperature-controlled measurement chamber for concentric cylinder geometries.
Key features
Two models to cover the whole spectrum of rheological asphalt and bitumen testing
The well-established SmartPave dynamic shear rheometers are able to analyze unmodified and modified asphalt binder and bitumen within a wide temperature range, either according to standards or by means of classic rheological methods. While SmartPave 102e is the instrument which meets the highest measurement demands, SmartPave 92 is designed especially for the demands of quality control and routine measurements in asphalt test labs.
The RheoCompass software: New paths for asphalt and bitumen testing
RheoCompass is a navigation tool that gives you the complete overview as well as the exact insights you require. It contains numerous templates that are tailored specifically to the needs of the asphalt industry. The predefined test procedures contain step-by-step instructions for all test types as defined by AASHTO, ASTM, DIN EN, and FGSV.
Unique accessories for easy handling
SmartPave 92’s and SmartPave 102e’s unique temperature control unit is the first Peltier heating system with heating elements above and below the sample. Furthermore, the instruments feature Toolmaster™ – the only completely contact-free automatic tool recognition and configuration system for rheometers. It recognizes measuring systems and temperature control units as soon as they are connected to the rheometer. Entering your data manually will become a thing of the past.
Fully automatic temperature calibration
Anton Paar offers fully automatic temperature calibration and verification routines in the RheoCompass software. Temperature accuracy and stability are crucial in asphalt testing. The unique automatic temperature calibration routine ensures temperature gradients <0.1 °C.
Experienced experts close to you
Anton Paar’s worldwide service network ensures that an expert on your system is always close by. Numerous installed instruments around the globe, an extensive application database, and cooperation with civil engineering institutes confirm that Anton Paar is the first choice for answering any rheological question on your asphalt binder and bitumen you might have.
Technical specifications
| Technical Data | Unit | SmartPave 92 | SmartPave 102e |
| Bearing design | - | Air, fine-pored carbon | |
| Motor design | - | Electronically Commutated (EC) - Permanent Magnet Synchronous Motor | |
| Displacement transducer design | - | High-resolution optical encoder | |
| Normal force measurment design (US Pat. 6167752,1996) | - | - | 360 ° capacitive sensor, non-contacting, fully integrated in bearing |
| Working mode | - | Combined Motor Transducer (CMT) | |
| Minimum torque (rotation) | nNm | 1 µNm | 5 |
| Minimum torque (oscillation) | mNm | 1 µNm | 2 |
| Maximum torque | mNm | 125 | 200 |
| Minimum angular deflection (set value) | µrad | 1 | 0.5 |
| Maximum angular deflection (set value) | µrad | ∞ | ∞ |
| Minimum angular velocity[1] | rad/s | 0 | 0 |
| Maximum angular velocity | rad/s | 157 | 314 |
| Maximum speed | 1/min | 1500 | 3000 |
| Minimum speed (CSS/CSR) | 1/min | 10-3 | 10-7 |
| Minimum angular frequency[2] | rad/s | 10-4 | 10-7 |
| Maximum angular frequency | rad/s | 628 | 628 |
| Maximum frequency[3] | HZ | 100 | 100 |
| Normal force range | N | - | -50 to 50 |
| Normal force sensitivity | N | - | 0.01 |
| Minimum gap size change | µm | 0.625 | 0.625 |
| Dimensions (W x H x D) | mm | 380 x 660 x 530 | 444 x 678 x 586 |
| Weight | kg | 33 | 42 |
| Additional Device Features | |||
| Device display with remote control of software (decoupled from measuring sensor for mechanical and electromagnetic interference prevention) | - | Yes | Yes |
| Direct strain/stress controller | - | Yes | Yes |
| TruStrain™(sample adaptive controller) | - | No | Yes |
| TruRate™ (sample adaptive controller) | - | No | Optional |
| Raw data (LAOS, waveform) | - | No | Optional |
| Normal force profiles (set and read) | - | No | Yes |
| Velocity profiles, tack, squeeze | - | No | Yes |
| Automatic gap control/setting (AGC/AGS) | - | Yes | Yes |
| Electronic trim lock for measuring geometry | - | Yes | Yes |
| TruGap™ (permanent control of the real measuring gap) (US Pat. 6499336, 2000) | - | No | Optional |
| T-Ready™ (detection of sample temperature equilibrium time) (US Pat. 8904852, 2011)[4] | - | No | Yes |
| Toolmaster™ (measuring geometries and accessories, storing of zero-gap) (US Pat. 7275419, 2004) | - | Yes | Yes |
| QuickConnect Coupling for measuring geometries (one-hand operation, screwless) | - | Yes | Yes |
| Trimming mirror (360° blind sample spot prevention) | - | No | Yes |
| Three-point support of device (three robust feet for tool-free one hand alignment) | - | Yes | Yes |
| Three-point support for mounting of measuring cells (wobble prevention, no misalignment after changing of cells) | - | Yes | Yes |
| Maximum temperature range[4] | °C | -50 to +400 | -160 to +1000 |
| Virtually gradient-free temperature control (horizontal,vertical) | - | Yes | Yes |
| Temperature gradient >0.1 °C according to AASHTO and ASTM | - | Yes | Yes |
| CoolPeltier™ Peltier System with built-in cooling option that does not require additional accessories for counter cooling | °C | -5 to +200 | -5 to +200 |
| Pressure Cell | bar | No | up to 1000 |
| Safe Gap™ normal force limiter during gap setting | - | Yes | No |
| TruRay™ dimmable illumination of sample area | - | Yes | No |
| RheoCompass Software | |||
| Asphalt standard operation procedures (SOP) with regular updates | - | Yes | Yes |
| Auto Update via Network | - | Optional | Optional |
| Fully automatic temperature calibration | - | Yes | Yes |
| Test and analysis designer | - | Yes | Yes |
| Report designer (with all test information for export and print) | - | Yes | Yes |
| Managed lab multiple clients and servers | - | Optional | Optional |
- In controlled shear stress (CSS) mode. In controlled shear rate (CSR) mode, depending on measuring point duration and sampling rate.
- Theoretical value (duration per cycle = 2 years)
- Higher frequencies are possible using multi-wave functionality (942 rad/s (150 Hz) or even higher, depending on measuring system and sample)
- Depending on used temperature device
Standards
AASHTO
AGPT
ASTM
DIN EN
FGSV
GOST
IS
SATS
Anton Paar Certified Service
- More than 350 manufacturer-certified technical experts worldwide
- Qualified support in your local language
- Protection for your investment throughout its lifecycle
- 3-year warranty
Documents
-
Behavior of bitumen in the temperature range of -6 °C to +90 °C Application Reports
-
Instructions for FGSV 722 Application Reports
-
not available in English - FGSV 720 - Bitumen-Typisierungs-Schnell-Verfahren Application Reports
-
not available in English - FGSV 723 - Multiple Stress Creep Recovery Test Application Reports
-
not available in English - Shear Relaxation Viscosity Application Reports
-
Pave your way - Asphalt Flyer Brochures
-
CE Declaration of Conformity MCR xx2 Certificates
-
Conformity SmartPave 92 AASHTO, ASTM, ... Certificates
-
Firmware MCRxx2 Version 4.91 Software and Firmware
-
Firmware MCRxx2 Version 5.11 Software and Firmware
Consumables & Accessories
Consumables & Accessories
Accessories
Accessories
To find out if you can purchase online from your location, check the online availability below.
If you do not find the item you require, please contact your Anton Paar sales representative.
DISPOSABLE MEASURING CUP C-CC27/D/AL 1 pack = 100 uds.
SmartPave 92 | 102e
FILTER ELEMENT FOR CLEARPOINT FINE FILTER 10660
SmartPave 92 | 102e
FILTER ELEMENT FOR CLEARPOINT MICRO FILTER 10661
SmartPave 92 | 102e
SILICON MOLD FOR ASPHALT BINDER (PP25) ACCORDING AASHTO T315
SmartPave 92 | 102e
SILICON MOLD FOR ASPHALT BINDER (PP08) ACCORDING AASHTO T315
SmartPave 92 | 102e
VISCOSITY STANDARD ANTON PAAR S3 (L) 500 ml - 3.7 / 2.3 / 0.9 mPa.s
SmartPave 92 | 102e
VISCOSITY STANDARD ANTON PAAR N7.5 (M) 500 ml - 10 / 5.4 / 1.6 mPa.s
SmartPave 92 | 102e
VISCOSITY STANDARD ANTON PAAR N26 (C) 500 ml - 50 / 21 / 4.2 mPa.s
SmartPave 92 | 102e
VISCOSITY STANDARD ANTON PAAR N415 (H) 500 ml - 1100 / 330 / 32 mPa.s
SmartPave 92 | 102e
Temperature control for MCR:
Peltier systems
SmartPave 92 | 102e
- Effective and convenient heating and cooling
- Temperature control with minimized temperature gradients from -50 °C to 220 °C
- Modular system for combination with Rheo-Optics accessories
- For cone-plate, parallel-plate, and cylinder measuring systems
INSET I-PP50/CU/CX D:
50 mm; COPPER ALLOY, COATED
SmartPave 92 | 102e
INSET I-PP08/CU/CX (WITH GROOVE) D:
8 mm, COPPER ALLOY, COATED
SmartPave 92 | 102e
MEASURING PLATE PP20 D:
20 mm
SmartPave 92 | 102e
INSET I-PP25/CU/CX D:
25 mm; COPPER ALLOY, COATED
SmartPave 92 | 102e
MEASURING PLATE PP25/P2 D:
25 mm, PROFILED: 1X0.5
SmartPave 92 | 102e
MEAS. CYLINDER B-CC27 D:
26.66 mm
SmartPave 92 | 102e
MEASURING PLATE PP08/PE D:
8 mm
SmartPave 92 | 102e
MEASURING PLATE PP25/PE D:
25 mm
SmartPave 92 | 102e
MEASURING PLATE PP08/SP D:
8 mm
SmartPave 92 | 102e
MEASURING PLATE PP25/SP D:
25 mm
SmartPave 92 | 102e