This is a required field.
Invalid
Part number
Error in validation!

Dynamic Shear Rheometer:
SmartPave

  • +8
  • 360°
Model:
  • The asphalt rheometer for quality control and routine measurements of asphalt and bitumen
  • Illuminated sample area for perfect trimming results
  • Air-cooled Cool Peltier temperature accessory renders thermostats obsolete

The dynamic shear rheometers (DSR) SmartPave 92 and SmartPave 102e allow precise measurements on asphalt binder and bitumen. Features such as Toolmaster™, QuickConnect, a Peltier temperature device for dry sample heating, and step-by-step instructions for measuring procedures according to AASHTO T315, AASHTO T350, AASHTO TP101, ASTM D7175, ASTM D7405, and DIN EN 14770 guarantee the most convenient operation. For measurements according to AASHTO T316, ASTM D4402, and DIN EN 13302, both instruments can be equipped with a Peltier-temperature-controlled measurement chamber for concentric cylinder geometries.


Get Our Latest Bitumen Rheology Book
Interested in learning more about the flow and deformation behavior of bitumen in an easy, entertaining way? Then join Joe Flow and Samira Smart on the Bitumen Rheology Road.
Order now

Key features

Two models to cover the whole spectrum of rheological asphalt and bitumen testing

Two models to cover the whole spectrum of rheological asphalt and bitumen testing

The well-established SmartPave dynamic shear rheometers are able to analyze unmodified and modified asphalt binder and bitumen within a wide temperature range, either according to standards or by means of classic rheological methods. While SmartPave 102e is the instrument which meets the highest measurement demands, SmartPave 92 is designed especially for the demands of quality control and routine measurements in asphalt test labs.

The RheoCompass software: New paths for asphalt and bitumen testing

The RheoCompass software: New paths for asphalt and bitumen testing

RheoCompass is a navigation tool that gives you the complete overview as well as the exact insights you require. It contains numerous templates that are tailored specifically to the needs of the asphalt industry. The predefined test procedures contain step-by-step instructions for all test types as defined by AASHTO, ASTM, DIN EN, and FGSV.

Unique accessories for easy handling

Unique accessories for easy handling

SmartPave 92’s and SmartPave 102e’s unique temperature control unit is the first Peltier heating system with heating elements above and below the sample. Furthermore, the instruments feature Toolmaster™ – the only completely contact-free automatic tool recognition and configuration system for rheometers. It recognizes measuring systems and temperature control units as soon as they are connected to the rheometer. Entering your data manually will become a thing of the past. 

Fully automatic temperature calibration

Fully automatic temperature calibration

Anton Paar offers fully automatic temperature calibration and verification routines in the RheoCompass software. Temperature accuracy and stability are crucial in asphalt testing. The unique automatic temperature calibration routine ensures temperature gradients <0.1 °C.

Upgrade your SmartPave DSR to a BBR

Upgrade your SmartPave DSR to a BBR

Enhance your SmartPave 102e or 92 with a specialized software solution from our cooperation partner, Pavement Systems LLC. Connect effortlessly to this external analysis software and unlock a range of features, including iCCL testing. This is a powerful surrogate method to BBR (AASHTO PP112), which gives you information about the low temperature PG-grade as well as m-value, S, and delta TC within 30 minutes. Learn more about Pavement Systems and their analysis solutions.

Experienced experts close to you

Experienced experts close to you

Anton Paar’s worldwide service network ensures that an expert on your system is always close by. Numerous installed instruments around the globe, an extensive application database, and cooperation with civil engineering institutes confirm that Anton Paar is the first choice for answering any rheological question on your asphalt binder and bitumen you might have.

Technical specifications

Technical Data Unit SmartPave 92 SmartPave 102e
Bearing design - Air, fine-pored carbon
Motor design - Electronically Commutated (EC) - Permanent Magnet Synchronous Motor
Displacement transducer design - High-resolution optical encoder
Normal force measurment design
(US Pat. 6167752,1996)
- - 360 ° capacitive sensor, non-contacting, fully integrated in bearing
Working mode - Combined Motor Transducer (CMT)
Minimum torque
(rotation)
nNm 1 µNm 5
Minimum torque
(oscillation)
nNm 1 µNm 2
Maximum torque mNm 125 200
Minimum angular deflection
(set value)
µrad 1 0.5
Maximum angular deflection
(set value)
µrad
Minimum angular velocity[1] rad/s 0 0
Maximum angular velocity rad/s 157 314
Maximum speed 1/min 1500 3000
Minimum speed (CSS/CSR) 1/min  10-3  10-7
Minimum angular frequency[2] rad/s  10-4  10-7
Maximum angular frequency rad/s 628 628
Maximum frequency[3] HZ 100 100
Normal force range N - -50 to 50
Normal force sensitivity N - 0.01
Minimum gap size change µm 0.625 0.625
Dimensions (W x H x D) mm 380 x 660 x 530 444 x 678 x 586
Weight kg 33 42
Additional Device Features
Device display with remote control of software (decoupled from measuring sensor for mechanical and electromagnetic interference prevention) - Yes Yes
Direct strain/stress controller - Yes Yes
TruStrain™(sample adaptive controller) - No Yes
TruRate™  (sample adaptive controller) - No Optional
Raw data (LAOS, waveform) - No Optional
Normal force profiles (set and read) - No Yes
Velocity profiles, tack, squeeze - No Yes
Automatic gap control/setting (AGC/AGS) - Yes Yes
Electronic trim lock for measuring geometry - Yes Yes
TruGap™
(permanent control of the real measuring gap)
(US Pat. 6499336, 2000)
- No Optional
T-Ready™
(detection of sample temperature equilibrium time)
(US Pat. 8904852, 2011)[4]
- No Yes
Toolmaster™
(measuring geometries and accessories, storing of zero-gap)
(US Pat. 7275419, 2004)
- Yes Yes
QuickConnect Coupling for measuring geometries
(one-hand operation, screwless)
- Yes Yes
Trimming mirror
(360° blind sample spot prevention)
- No Yes
Three-point support of device
(three robust feet for tool-free one hand alignment)
- Yes Yes
Three-point support for mounting of measuring cells
(wobble prevention, no misalignment after changing of cells)
- Yes Yes
Maximum temperature range[4] °C -50 to +400 -160 to +1000
Virtually gradient-free temperature control
(horizontal,vertical)
- Yes Yes
Temperature gradient >0.1 °C according to AASHTO and ASTM - Yes Yes
CoolPeltier™ Peltier System with built-in cooling option that does not require additional accessories for counter cooling °C -5 to +200 -5 to +200
Pressure Cell bar No up to 1000
Safe Gap™ normal force limiter during gap setting - Yes No
TruRay™ dimmable illumination of sample area - Yes No
RheoCompass Software
Asphalt standard operation procedures (SOP) with regular updates - Yes Yes
Auto Update via Network - Optional Optional
Fully automatic temperature calibration - Yes Yes
Test and analysis designer - Yes Yes
Report designer
(with all test information for export and print)
- Yes Yes
Managed lab multiple clients and servers - Optional Optional
  1. In controlled shear stress (CSS) mode. In controlled shear rate (CSR) mode, depending on measuring point duration and sampling rate.
  2. Theoretical value (duration per cycle = 2 years)
  3. Higher frequencies are possible using multi-wave functionality (942 rad/s (150 Hz) or even higher, depending on measuring system and sample)
  4. Depending on used temperature device

Standards

Open all
Close all

AASHTO

M320
M332
T315 "SHRP-Test"
T316
T350 "MSCR-Test"
TP101 "LAS-Test"
TP123 BYET

AGPT

T125
T192
T194

ASTM

D4402
D7175 "SHRP-Test"
D7405 "MSCR-Test"
D7552

DIN EN

13302
13702
14770
16659 "MSCR-Test"

FGSV

AL 720 BTSV
AL 721 Constant Shear Rate
AL 722 Temperature Sweep
AL 723 MSCR-Test

GOST

33133
33137
R 58400.1
R 58400.6
R 58400.7
R 58400.10

IS

73
15462

SATS

3208

Anton Paar Certified Service

The Anton Paar quality in service and support:
  • More than 350 manufacturer-certified technical experts worldwide
  • Qualified support in your local language
  • Protection for your investment throughout its lifecycle
  • 3-year warranty
Learn more

Documents

Categories
Industry
Application
Product
Your choice: Reset all filters

No results found!

See more

Consumables & Accessories

Consumables & Accessories

Accessories

Accessories

Not all items are purchasable online in specific countries.

To find out if you can purchase online from your location, check the online availability below.

DISPOSABLE MEASURING CUP C-CC27/D/AL 1 pack = 100 uds.

Compatible with:
SmartPave 92 | 102e
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 3716

FILTER ELEMENT FOR CLEARPOINT FINE FILTER 10660

Compatible with:
SmartPave 92 | 102e
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 11242

FILTER ELEMENT FOR CLEARPOINT MICRO FILTER 10661

Compatible with:
SmartPave 92 | 102e
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 11243

SILICON MOLD FOR ASPHALT BINDER (PP25) ACCORDING AASHTO T315

Compatible with:
SmartPave 92 | 102e
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 26300

SILICON MOLD FOR ASPHALT BINDER (PP08) ACCORDING AASHTO T315

Compatible with:
SmartPave 92 | 102e
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 26301

VISCOSITY STANDARD ANTON PAAR S3 (L) 500 ml - 3.7 / 2.3 / 0.9 mPa.s

Compatible with:
SmartPave 92 | 102e
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 81118

VISCOSITY STANDARD ANTON PAAR N7.5 (M) 500 ml - 10 / 5.4 / 1.6 mPa.s

Compatible with:
SmartPave 92 | 102e
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 81119

VISCOSITY STANDARD ANTON PAAR N26 (C) 500 ml - 50 / 21 / 4.2 mPa.s

Compatible with:
SmartPave 92 | 102e
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 81120

VISCOSITY STANDARD ANTON PAAR N415 (H) 500 ml - 1100 / 330 / 32 mPa.s

Compatible with:
SmartPave 92 | 102e
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 81121

Temperature Control for MCR:
Peltier Systems 

Compatible with:
SmartPave 92 | 102e
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Product details
  • Effective and convenient heating and cooling
  • Temperature control with minimized temperature gradients from -50 °C to 220 °C
  • Modular system for combination with Rheo-Optics accessories
  • For cone-plate, parallel-plate, and cylinder measuring systems

More info

MEASURING PLATE PP20 D:
20 mm 

Compatible with:
SmartPave 92 | 102e
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 3049

INSET I-PP08/CU/CX (WITH GROOVE) D:
8 mm, COPPER ALLOY, COATED 

Compatible with:
SmartPave 92 | 102e
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 76677

MEASURING PLATE PP25/P2 D:
25 mm, PROFILED: 1X0.5 

Compatible with:
SmartPave 92 | 102e
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 3882

INSET I-PP25/CU/CX D:
25 mm; COPPER ALLOY, COATED 

Compatible with:
SmartPave 92 | 102e
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 76678

INSET I-PP50/CU/CX D:
50 mm; COPPER ALLOY, COATED 

Compatible with:
SmartPave 92 | 102e
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 76680

MEAS. CYLINDER B-CC27 D:
26.66 mm 

Compatible with:
SmartPave 92 | 102e
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 78234

MEASURING PLATE PP08/PE D:
8 mm 

Compatible with:
SmartPave 92 | 102e
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 3477

MEASURING PLATE PP25/PE D:
25 mm 

Compatible with:
SmartPave 92 | 102e
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 3479

MEASURING PLATE PP08/SP D:
8 mm 

Compatible with:
SmartPave 92 | 102e
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 164918

MEASURING PLATE PP25/SP D:
25 mm 

Compatible with:
SmartPave 92 | 102e
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 164917