Flavors and fragrances
Getting the most information out of small volumes
Concentration, purity, viscosity, and more – knowledge about these parameters is required to unlock the secrets of the raw materials and formulations used in the production of flavors and fragrances. Manufacturing chemical flavors, aromas, and perfumes which will be accepted and endorsed by consumers demands measuring instrumentation for use in rigorous quality testing and during the research phase. Anton Paar provides stand-alone instruments and modular systems which can be set to determine many parameters in automated measurement cycles.
Anton Paar Products
ABA
Abbemat Essential 3001
Abbemat Essential 3101
Abbemat Essential 3201
DMA 1002
DMA 502
L-Cor 8000
L-Cor 4000
L-Com 5500
DMA 6002 Sound Velocity
DMA 4200 M
Cora 5001 Direct Pharma
Cora 5001 Direct Standard
Cora 5001 Fiber Pharma
Cora 5001 Fiber Process Monitoring
Cora 5001 Fiber Standard
Litesizer DLS 101
Litesizer DLS 501
Litesizer DLS 701
Lyza 3000
Lyza 7000
L-Cor 6000
L-Dens 3300
L-Dens 7400
L-Dens 7500
Abbemat Advanced 5001
Abbemat Advanced 5101
Abbemat Advanced 5201
Multiwave
Monowave
Monowave 200
Monowave 400
Monowave 450
DMA 4002
DMA 5002
DMA 6002
MCP
MCP
Flavor & Fragrance Measurement System
RapidOxy 100
PMA 500
Abbemat Pharma 7001
Abbemat Pharma 7201
DMA 35 Standard
Lovis 2001 Benchtop
Lovis 2001 Module
ViscoQC
TAG 300
TAG 500
Small sample quantity for a comprehensive result
When determining different parameters it is not always possible to use a high volume of sample. Sometimes there is only a small sample quantity available or the liquid to be analyzed is expensive. You want to use the smallest sample volume possible in order to keep costs low. Anton Paar has several instruments and accessories which offer a practical solution requiring only a small sample volume. Filling a few milliliters into a multiparameter setup such as Measurement Systems gives an output of results for density, refractive index, and optical rotation. The sample can be recovered after the measurement. Measurement modules for viscosity, turbidity, and pH can also be added to the system.
No cross-contamination
With Anton Paar instruments there is no risk of contaminating your measured sample with previous samples. You can rely on analysis free of contamination and carry-over. Your results will be highly accurate and there is also the option to recover your samples.
The highest quality for wholesome products
A pure substance is the basis for a wholesome product. The high quality of ingredients can be ensured by measurement of density, refractive index, specific and optical rotation, oxidation stability, viscosity, Raman spectroscopy, and flash point. All these parameters can be determined by Anton Paar instruments.
Support of the production of flavors and fragrances
With our broad product range, we provide instrumentation for every situation to help you tackle your daily challenges. From raw material monitoring to formulation checks and quality control, we have the right instrument for your needs. When researching new natural or artificial flavoring, perfumes, essential oils, e-liquids, syrups, food extracts, liquid fragrances, or cosmetics, Anton Paar’s instruments help you gain insight into material properties.
Automated filling, draining, and cleaning
Using an automatic sample changer from the Xsample series is a must when there are many samples to be measured each day. Automating this step means errors caused by manual sample filling are avoided. Using customized vials full of sample straight from production saves time. In addition, the original bar code can be used for identification. With an Xsample sample changer you can apply different methods for each single sample within one magazine. The different samples are then assigned to different filling, draining, and cleaning routines, using up to three different solvents. Anton Paar’s sample changers are space-saving and quiet, so they won’t disturb other people at work in the laboratory.
