필수 필드입니다.
Invalid
부품 번호
벨리데이션에 오류가 있습니다!

마이크로파 추출 로터:
Rotor 16SOLV HF100

Multiwave 5000에 사용되는 Rotor 16SOLV HF100은  마이크로파 이용한 시료 추출에 사용할 수 있도록 적용 범위를 더욱 넓혔으며, 나사형 뚜껑을 교체하면 산 분해 용도에 사용할 수 있도록 쉽게 사용할 수 있습니다. 빠르고 쉽고 안전한 마이크로파 추출(MAE)은 HPLC 또는 GC 기반으로한 분석의 성능과 처리량을 모두 개선할 수 있습니다. 환경 및 식품 시료의 PCB, PAH 및 탄화수소 추출 또는 폴리머 의 이전 유도체화 반응과 같은 과정을 15~30분 안에 완벽게 처리할 수 있으며 우수한 결과를 제공합니다. 압력 용기인 SOLV HF100은 최대 240°C의 온도에서 운용할 수 있는 세라믹 용기(자켓)가 장착되어 있습니다.

주요 특징

  • 추출 시간 대폭 단축
  • 용제 소비량 최소화
  • 최대 16개 시료 동시 추출
  • US-EPA 및 ASTM 분석방법 준수
  • 용기는 밀폐되어 있으며 다루기 쉬움
  • 최고 수준의 안전 표준이 되는GS 및 ETL 인증서 획득
  • 밀폐 용기 내 완벽한 온도 및 압력 제어 - 15~30분 이내에 완벽한 추출
  • 비극성 용제를 위한 비활성 가열 요소 사용 가능

Anton Paar 공인 서비스

Anton Paar 서비스 및 지원 품질 :
  • 전 세계 350명 이상의 제조업체 인증 기술 전문가
  • 현지 언어로 이루어지는 검증된 지원
  • 수명 주기 동안 투자 보호
  • 3년 보증
더 알아보기

문서

액세서리

액세서리

액세서리

액세서리

특정 국가에서 모든 품목을 온라인으로 구매할 수있는 것은 아닙니다.

자신의 지역에서 온라인으로 구매할 수 있는지 알아보려면 아래에서 온라인으로 구매가 가능한지 을 확인하십시오.

The gas loading accessory set is a special tool for purging and charging the pressure vessel with gases. It is a helpful tool for performing reactions under inert gas atmosphere or utilizing gaseous reagents. This accessory is suitable for several applications such as microwave oxygen combustion, synthesis, protein hydrolysis and pressure filtration.

가스 로딩 액세서리 세트

추가 정보
온라인 가격 | 제외포함 0부가가치세
배송 시간: %1$s ~ %2$s 영업일 %1$s~%2$s주 %1$s~%2$s개월

가수 분해 세트

추가 정보
온라인 가격 | 제외포함 0부가가치세
배송 시간: %1$s ~ %2$s 영업일 %1$s~%2$s주 %1$s~%2$s개월
The all-purpose calibration unit enables checks and calibrations of all types of temperature sensors used in Multiwave PRO and Multiwave ECO. Calibration of the temperature sensors using the calibration unit maintains the accuracy of the temperature measurement in order to comply with GLP and to extend the lifetime of the reaction vessels.

교정 장치

추가 정보
온라인 가격 | 제외포함 0부가가치세
배송 시간: %1$s ~ %2$s 영업일 %1$s~%2$s주 %1$s~%2$s개월
Pressure/temperature sensor accessory for precise reaction control within the reference vessel of Rotor 16MF100 and/or Rotor 16HF100.

p/T 센서 액세서리

추가 정보
온라인 가격 | 제외포함 0부가가치세
배송 시간: %1$s ~ %2$s 영업일 %1$s~%2$s주 %1$s~%2$s개월
The pressure sensor accessory allows for precise reaction control within the reference vessel of Rotor 16MF100 or Rotor 16HF100. The pressure data is transferred to the oven via infrared signal. If required, the pressure sensor accessory can be upgraded to a pressure/temperature sensor accessory.

압력 센서 액세서리

추가 정보
온라인 가격 | 제외포함 0부가가치세
배송 시간: %1$s ~ %2$s 영업일 %1$s~%2$s주 %1$s~%2$s개월
Different racks are available for the adequate storage of the various vessel types and liners of Multiwave PRO as well both vial sizes of Monowave 300. For vessels applicable in the multimode reactors Anton Paar supplies Rack 16, a polyethylene foam block for 16 vessels or liners of Rotor 8 and Rotor 16.
온라인 가격 | 제외포함 0부가가치세
배송 시간: %1$s ~ %2$s 영업일 %1$s~%2$s주 %1$s~%2$s개월

소모품 세트

추가 정보
온라인 가격 | 제외포함 0부가가치세
배송 시간: %1$s ~ %2$s 영업일 %1$s~%2$s주 %1$s~%2$s개월
The cylindrically shaped passive heating elements are made of sintered silicon carbide (SiC). Due to its high microwave absorbance and excellent heat capacity, SiC can be used to efficiently heat low-absorbing solvents (toluene, dioxane, THF…) in a microwave environment.

수동식 가열 소재

추가 정보
온라인 가격 | 제외포함 0부가가치세
배송 시간: %1$s ~ %2$s 영업일 %1$s~%2$s주 %1$s~%2$s개월
The seal forming device enables the proper pre-forming and safe storage of seals and screw caps of Rotor 8 and 16. One unit has a capacity for 8 caps/seals of different kinds. Storage in this device prolongs the lifetime of the lip-type seals.

씰 형성 장치

추가 정보
온라인 가격 | 제외포함 0부가가치세
배송 시간: %1$s ~ %2$s 영업일 %1$s~%2$s주 %1$s~%2$s개월

SOLV 안전 모듈

추가 정보
온라인 가격 | 제외포함 0부가가치세
배송 시간: %1$s ~ %2$s 영업일 %1$s~%2$s주 %1$s~%2$s개월

자성 교반기 장치

추가 정보
온라인 가격 | 제외포함 0부가가치세
배송 시간: %1$s ~ %2$s 영업일 %1$s~%2$s주 %1$s~%2$s개월

로터 스탠드

추가 정보
온라인 가격 | 제외포함 0부가가치세
배송 시간: %1$s ~ %2$s 영업일 %1$s~%2$s주 %1$s~%2$s개월