Particle size analyzer:
Litesizer
-
-
-
- +5
- 360°
- Particle size measurements from the nano- to the micrometer range
- DLS back scatter detection ensures broad concentration range
- Automatic measurement modes
- Continuous transmittance measurement
The Litesizer series is the perfect choice to characterize nano- and microparticles at the touch of a button. Particles in dispersion as well as peptides or macromolecules in solution can be determined over a broad concentration range, limiting the time for sample preparation. Litesizer 500 includes three measurement angles for particle size determination as well as patented cmPALS technology, which enables zeta potential measurements at low voltages with the highest repeatability and accuracy.
Key features
Litesizer chooses the ideal measurement angle for your sample to ensure the highest data quality
The three detection angles for DLS measurements in Litesizer 500 (side-, back-, or forward scattering) allow for optimal parameter settings. With the included automatic angle selection the instrument can define the most appropriate angle for your sample. Litesizer 100 uses the versatile backscatter angle, which is ideal for turbid samples because it reduces multiple scattering events and enables optimal data quality. You get a complete analysis of your sample as the Litesizer series is able to resolve up to three different particle size classes within one measurement.
Zeta potential measurements down to 0.1 mg/mL for the highest sensitivity
With Litesizer 500 you can perform zeta potential measurements via electrophoretic light scattering. The patented cmPALS technique (European Patent 2 735 870) allows highly sensitive measurements for meaningful results even at the lowest sample concentration, within significantly shorter measuring times and with minimized sample degradation. This is especially helpful for e.g. peptide solutions. Further, the unique Anton Paar Ω-shaped capillary of the zeta potential cuvettes creates a stable electric field exactly at the measurement position, resulting in highly reproducible zeta potential measurements.
Continuous transmittance measurement for sample monitoring
The continuously measured transmittance gives you instant feedback about your sample. It further allows automatic optimization of measurement parameters, such as measurement angle, focus position, and duration. The transmittance also provides information about the onset of sedimentation or aggregation within a series measurement.
All-in-one instrument – determination of the refractive index
The refractive index of the sample solvent is a required input parameter for DLS and ELS measurements. While for most particle analyzers these indices must be determined from external sources, Litesizer 500 is able to measure the refractive index at the exact wavelength and temperature of your DLS or ELS measurement (European Patent 3 023 770). This ensures maximum accuracy of particle size and zeta potential results under all experimental conditions. Litesizer 500 determines the refractive index within ±0.5 %, as defined by ISO 22412:2017 concerning the accuracy of the refractive index required for DLS.
Get a clear overview of your measurements with the Kalliope software
The Litesizer series’ measurement software, Kalliope, provides an intuitive one-page workflow. Input parameters, measurement signals, and results are all at hand. The one-page workflow also allows you to start a measurement with only three clicks. Pre-defined standard reports and structured result overviews provide quick access to your measurement result. You can also have a deeper look into the data via the analysis function, Excel export, and customizable report templates. Kalliope is fully compliant with the FDA’s 21 CFR Part 11 regulations. Explore more features of Kalliope here
Technical specifications
| Litesizer 500 | Litesizer 100 | |
| Particle size specifications | ||
| Measurement principle | Dynamic Light Scattering (DLS) | |
| Measuring range | 0.3 nm to 10 μm (particle diameter) | |
| Measurement angles | 15°, 90°, 175° | 175° |
| Min. concentration | 0.1 mg/mL (lysozyme) | |
| Max. concentration | 50 %w/v (sample-dependent) | |
| Min. sample volume | 12 µL | |
| Accuracy | Better than +/-2 % on NIST traceable standards | |
| Repeatability | Better than +/-2 % on NIST traceable standards | |
| Zeta potential specifications | ||
| Measuring principle | Electrophoretic Light Scattering (ELS) / cmPALS | - |
| Measuring range | >= +/-1000 mV | - |
| Mobility range | 10 -11 m²/V.s to 2 x 10 -7 m²/V.s | - |
| Size range | 3.8 nm to 100 µm (diameter) | - |
| Min. sample concentration | 0.1 mg/mL (lysozyme) | - |
| Max. sample concentration | 70 %w/v (sample-dependent) | - |
| Max. sample conductivity | 200 mS/cm | - |
| Min. sample volume | 50 µL (sample-viscosity-dependent) | - |
| Accuracy | Better than +/-10 % | - |
| Repeatability | +/-3 % | - |
| Molecular mass specifications | ||
| Measuring principle | Static Light Scattering (SLS) | - |
| Measuring range (mass) | 980 Da to 20 MDa | - |
| Measuring range (particle size) | up to 40 nm (diameter) | - |
| Measurement angle | 90° | - |
| Min. sample concentration | 0.1 mg/mL (lysozyme) | - |
| Accuracy | +/-10 % | - |
| Repeatability | +/-5 % | - |
| Transmittance specifications | ||
| Measuring range | 0 % to 100 % | |
| Min. sample volume | 15 µL | |
| Accuracy | Better than +/-1 % | |
| Refractive index specifications | ||
| Measuring range | 1.28 to 1.50 | - |
| Min. sample volume | 1 mL | - |
| Accuracy | +/-0.5 % | - |
| General specifications | ||
| Light source | Semiconductor laser diode / 40 mW, 658 nm | |
| Laser warm-up time | 6 min | |
| Temperature control range | 0 °C to 90 °C | |
| Ambient operating temperature | 10 °C to 35 °C | |
| Humidity | up to 80 % non-condensing | |
| Dimensions (W, D, H) | 460 mm, 485 mm, 135 mm | |
| Weight | approx. 18 kg (40 lb) | approx. 16.3 kg (36 lb) |
Standards
ASTM
ISO
U.S. Pharmacopoeia (USP)
Anton Paar Certified Service
- More than 350 manufacturer-certified technical experts worldwide
- Qualified support in your local language
- Protection for your investment throughout its lifecycle
- 3-year warranty
Documents
-
Black and green: catalyst and membranes for fuel cells Application Reports
-
Characterization of Exosomes Isolated from Cell Culture Media Application Reports
-
Characterizing different Formulations of Intimate Soap Application Reports
-
Coenzyme Q10 - Organic Nanoparticle Characterization Application Reports
-
Droplet Size Matters: Bioavailability of CBD Emulsions Application Reports
-
Dynamic Light Scattering Measurements on Latex Standards with the Litesizer 500 Application Reports
-
Dynamic zeta potential analysis Episode 1: Application in textile care Application Reports
-
Emulsions for IV Application - Particle Size by DLS Application Reports
-
Equal to the Task: Particle Size Measurements in Different Cuvettes Application Reports
-
Fits Like a Glove: Particle Characterization for Latex Glove Production Application Reports
-
Food Characterization Application Reports
-
From Pottery to Membranes: Characterization of Ceramic Powders and Surfaces Application Reports
-
Functionalized Foils in Food Packaging: A Surface Analysis Application Reports
-
Get a clearer picture of your sample with the Transmittance tool Application Reports
-
Glowing Colors: Characterization of Printing Inks using DLS and ELS Application Reports
Similar products
Consumables & Accessories
Consumables & Accessories
Accessories
Accessories
To find out if you can purchase online from your location, check the online availability below.
If you do not find the item you require, please contact your Anton Paar sales representative.
LOW-VOL. DISPOSABLE CUVETTE SET (Uvette)
Litesizer 500 | 100
OMEGA CUVETTE FOR ZETA & SIZE (10 pcs.)
Litesizer 500 | 100
SYRINGES 2 ml LUER (100 pcs.)
Litesizer 500 | 100
BUFFER SOLUTION PH4.01 HAMILTON
Litesizer 500 | 100
SYRINGES 5 ml LUER (100 pcs.)
Litesizer 500 | 100
BUFFER SOLUTION PH7.00 HAMILTON
Litesizer 500 | 100
HOSE 2x4 SILICONE
Litesizer 500 | 100
PH STORAGE SOLUTION 500ML HAMILTON
Litesizer 500 | 100
O-RING 25x2 EPDM 70
Litesizer 500 | 100
DISPOSABLE CUVETTE PS 10 x 10 x 45 mm
Litesizer 500 | 100
VIAL 45 mL GLASS (100 Pcs.)
Litesizer 500 | 100
QUARTZ CUVETTE 12.5 x 12.5 x 45 mm
Litesizer 500 | 100
DISPOSABLE CUVETTE LIDS 1 PACK OF 100 PIECES
Litesizer 500 | 100
BUFFER SOLUTION PH10.01 HAMILTON
Litesizer 500 | 100
SYRINGE FILTER ANOTOP TYPE 25
Litesizer 500 | 100
SUPPORTING PLATE
Litesizer 500 | 100
SYRINGE FILTER ANOTOP TYPE 10
Litesizer 500 | 100
LOW VOLUME CUVETTE QUARTZ 45 µl 12.5 x 12.5 x 45 mm
Litesizer 500 | 100
GLASS CUVETTE 12.5 x 12.5 x 45 mm
Litesizer 500 | 100
100 nm NIST TRACEABLE SIZE STANDARD
Litesizer 500 | 100
220 nm NIST TRACEABLE STANDARD 0.002 %
Litesizer 500 | 100
ZETA POTENTIAL CONTROL
Litesizer 500
HOSE 1x2 SILICONE
Litesizer 500
Dosing System
Litesizer 500
- Accessory for Litesizer 500
- Automatically modifies the pH or adds solvents – saving time, and eliminating human error
- Use pH ramp templates in the software to set up your experiments
- Self-cleaning, no risk of sample carryover
USB CABLE
Litesizer 500 | 100
The Dynamic and Electrophoretic Light Scattering Guide
Order now
New horizons in particle analysis
Learn more
Lithium-ion battery production
Find out more