Sample changer:
Xsample 530
- The multi-sample changer with the highest cleaning performance
- Handles up to 71 samples with optional sample recovery
- Automated cleaning and drying with up to three solvents
- Customized magazines available for your own vials
- Measurement of volatile samples
upon request
The Xsample 530 sample changer for all Anton Paar master instruments handles samples with a wide range of properties. With controlled filling power, samples from plain water to highly viscous oils (up to 36,000 mPa.s) are filled in a minimum of time. The 71-position magazine for unattended operation can be exchanged with one hand to ensure easy handling and filling.
With up to three cleaning agents, Xsample 530 is ready to measure a great variety of samples in one run. No compromises regarding mechanical components as well as a superior resistance to chemicals ensures increased uptime of the system and low maintenance costs.
Key features

Perfect measurement results due to perfect cleaning
- Automatic rinsing and drying after each sample for perfect preparation of the system
- Up to three different solvents can be used in any order to achieve optimal cleaning performance
- Active needle cleaning – inside and outside – prevents any sample cross-contamination.
- Advanced settings for special treatment of the sample to increase performance

Easy operation through simplified workflows
- The removable magazine for easy sample collection has a capacity of 71 samples (12 mL vials) or 35 samples (45 mL vials).
- Customized magazines for almost any type of vial are available to ensure a smooth workflow in your lab.
- Standard modes in the intuitive software enable seamless sample measurement.
- Optional bar code reader for digital error-free data input and automated method assignment

Intelligent checks and procedures according to your needs
- Automatic sample recovery (optional accessory) returns expensive or hazardous samples to its vial
- Automatic filling and draining (sensor-controlled) for low-viscosity samples or samples up to 36,000 mPa.s
- Automatic air check before measurement to rule out sample cross-contamination
- Automatic pressure and tightness test to ensure trouble-free and safe operation
Technical specifications
Viscosity range Operation with internal air pump Operation with 2 bar external compressed air | 12.000 mPa·s at ambient and measuring temperature 36.000 mPa·s at ambient and measuring temperature |
---|---|
Filling mode | Pressure mode
Suction mode (optional) |
Minimum sample volume per measurement | approx. 3 mL (with master instrument DMA™ M) depending on system configuration |
Sample recovery | optional |
Rinse consumption per cycle | approx. 4 mL |
Sample throughput | max. 9 per hour depending on application and used pressure source |
Number of sample vials | 71 positions for 12 ml vials optional: 35 positions for 45 ml vials customer specific magazines on request |
Automatic filling and drying | Piston pump, internal air pump of master instrument or compressed air selectable |
Compressed air supply (optional) | 1.80 bar – 2.20 bar (26 psi – 32 psi) relative external compressed air typically: 2.0 bar (29 psi) rel. |
Necessary quality of air | Class 3 from ISO 8573-1: max. particle size: 5 μm max. pressure dew point:-20°C (-4°F) max. oil content: 1 mg/m3 |
Environmental conditions (EN 61010) | Indoor use only |
Air humidity | 10 to 90% relative humidity, non-condensing |
Operating temperature | +15 to +35 °C (+59 to +95 °F) |
Power supply | supplied by master instrument Mains voltage according to the type plate at the rear of master instrument (protective grounding required) |
Dimensions excl. master instrument (L x W x H) | 370 mm x 490 mm x 430 mm (14.6 in x 19.3 in x 17 in) |
Weight excl. master instrument | approx. 48 kg (105.8 lbs) |
Optional bar code reader | Laser Line Scanner, 1D Code Reader class 2 |
Anton Paar Certified Service
- More than 350 manufacturer-certified technical experts worldwide
- Qualified support in your local language
- Protection for your investment throughout its lifecycle
- 3-year warranty
Documents
-
'Under Pressure' - Automated Measurement of Volatile Substances Application Reports
-
Alcohol Measurement Using Anton Paar Density Meters Application Reports
-
Automated Quality Control of Fermented Milk Drinks Application Reports
-
Automated Viscosity Measurement of In-Service Oils Application Reports
-
Automated °Brix Measurements of Maple Syrup Application Reports
-
Fast and Reliable Density and Viscosity Measurement of Wort Application Reports
-
Quality Control of Liquids for E-Cigarettes Application Reports
Compatible instruments
Similar products
Consumables
Consumables
To find out if you can purchase online from your location, check the online availability below.
If you do not find the item you require, please contact your Anton Paar sales representative.

UNION NUT FOR CLEANING TUBULAR

VIAL CAP N24 BONDED (100 PCS.)

Silicon/PTFE septum D=17mm (200 pieces)

Needle for Xsample 530 TYPE 3

Piercer complete Xsample 530 FFKM

MPT for Xsample DISPO 7

Hose 350x3x2 FEP 2x1/4"-28 UNF

CANopen terminating plug M12, 5-pole

SLIDE GLAND NUT FOR DMA™ 512P

Connection Kit Modulyzer 2 ME

HOSE 750x3x2 PTFE 2x1/4"-28 UNF

Hose 1150x3x2 FEP 2x1/4"-28 UNF "AE"

DRIP PLATE 390 x 320.6 x 30 mm

O-ring 10x3 FFPM 250T - 75 shore black

VIAL 40 mL GLASS WITH CAPS (100 PCS.)

O-ring 3x1 FFPM 250T - 75 shore black

L-Fitting M12 / 4 mm / 4 mm

Hose 180x3x2 PTFE 2x1/4"-28 UNF

Spring XxXx

Hose 163x3x2 PTFE 2x1/4"-28UNF

Reflector for vial detector

Hose 230x3x2 PTFE 2x1/4"-28 UNF

Hose 230x3x2 PTFE 2x1/4"-28 UNF

HOSE 470x3x2 PTFE 2x1/4"-28 UNF

Bottle for rinsing liquid 1000mL

CLEANER SEALING FFKM

VIAL 20 mL GLASS WITH CAP (100 PCS.)

Hose 155x3x2 FEP 2x1/4"-28 UNF

Test tube rack PP 300x112x85

Hose 230x3x2 PTFE 2x1/4"-28 UNF

FILLING NOZZLE LUER ALCOLYZER

Inlet filter 20µm

Ferrule with screw joint

Hose 380x3x2 FEP 2x1/4"-28 UNF

Hose 750x3x2 PTFE 1x1/4"-28 UNF

Hose 1400x3x2 PTFE 1x1/4"-28 UNF

Hose 360x3x2 PTFE 1x1/4"-28 UNF

Check valve silicone hose 3X5

Hose 300x3x2 PTFE "AA"

Caps for 12mL vials standard (1000 Pcs.)

HOSE 4x6

HOSE 2.5X4

SIEVE

Vial 12mL PP (2000 Pcs. per pack)

Hose Tygon 2375 I.D.=1,6 O.D.=3,2

Tube Isoversinic noir 5x8

Vial 12mL glass (100 Pcs.)

Hose 260x3x2 PTFE 2x1/4"-28 UNF

Hose 330x3x2 PTFE 2x1/4"-28 UNF

Slip-off gasket needle Xsample 530

Vial 45 mL glass (99 Pcs.)

Glas vial cap 45 mL (200 PIECE)

Insert safety container 4 nozzles

Hose 250x3x2 PTFE 2x1/4"-28 UNF
