This is a required field.
Invalid
Part number
Error in validation!

Nanoindentation Tester:
NHT³

  • media
  • +5
  • 360°
  • Measurement of hardness, elastic modulus, and other surface mechanical properties from nanometer to micrometer scale
  • Immediate start of measurement after sample installation
  • Easy and fast indenter exchange
  • Force measurement up to 500 mN

The NHT³ nanoindentation tester is designed for measuring hardness, elastic modulus, creep, and other surface properties from the nanometer to the micrometer scale. Its force range from 0.1 mN to 500 mN provides maximum versatility. With the unique top surface referencing technique, an instrumented indentation measurement can be made immediately without waiting for thermal stabilization. The “Quick Matrix” indentation mode allows high throughput (up to 600 measurements per hour).

Combine instrumented indentation testing heads with scratch testing heads, a nanotribometer, and even an atomic force microscope on a unique Step surface testing platform.

Key features

Straightforward nanoindentation measurements

Straightforward nanoindentation measurements

With Anton Paar’s intuitive software you can easily define and analyze each type of instrumented indentation measurement, from standard to highly advanced methods. The integrated microscope offers a very large magnification range so you can observe the sample’s surface and allows you to directly define the measuring position. Moreover, the indenter is fully protected from collision by the reference ring and the exchange of a measuring tip can be done in less than 2 minutes.

High accuracy and short time to measure

High accuracy and short time to measure

The unique design of the instrument integrates a top surface reference ring that follows the sample’s surface throughout the indentation measurement. This means the indentation depth is always directly measured with respect to the current surface position. Anton Paar’s nanoindentation tester is the only instrument with this unique feature, meaning NHT³ delivers accurate results and not error-prone software corrections. A further advantage of this technique is that you can immediately start your measurement after the sample installation without waiting hours for thermal stabilization.

High throughput with quick matrices

High throughput with quick matrices

The fast measuring mode allows you to perform up to 600 measurements per hour with real indentation curves. Thanks to our referencing design, no thermal stabilization is needed, which allows you to install and immediately measure a high number of samples per day. With its user profiles, measurement protocols, multi-sample measurements, and customizable reporting, NHT³ has the highest throughput on the market. 

Additional dynamic mechanical analysis (DMA) with “Sinus Mode”

Additional dynamic mechanical analysis (DMA) with “Sinus Mode”

Sinus Mode enables you to perform DMA analysis in order to study the evolution of mechanical properties over depth (HIT, EIT vs. depth) and characterize the sample’s viscoelastic properties (E', E'': storage and loss moduli, tan δ). Sinus Mode offers additional features, such as quick indenter calibration and stress-strain analysis. 

Technical specifications

Maximum load [mN] 500
Load resolution [nN] 20
Load noise floor [rms] [μN] ≤0.5
Loading rate [mN/min] Up to 10000
Depth range [μm] 200
Depth resolution [nm] 0.01
Depth noise floor [rms] [nm] ≤0.15
Data acquisition rate [kHz] 192
Options
Liquid testing

Standards

Open all
Close all

ASTM

E2546

Anton Paar Certified Service

The Anton Paar quality in service and support:
  • More than 350 manufacturer-certified technical experts worldwide
  • Qualified support in your local language
  • Protection for your investment throughout its lifecycle
  • 3-year warranty
Learn more

Documents

Categories
Industry
Application
Product
Your choice: Reset all filters

No results found!

See more

Similar products

Consumables & Accessories

Consumables & Accessories

Accessories

Accessories

Not all items are purchasable online in specific countries.

To find out if you can purchase online from your location, check the online availability below.

FUSED SILICA AND COPPER SAMPLES

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 145019

CERTIFIED FUSED SILICA SAMPLE WITH STUD CERTIFIED SAMPLE FOR ELASTIC MODULUS

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 161817
Product details
For indenter calibration and reference measurement. Certified sample for elastic modulus: diameter = 25mm. height = 5mm (without stud). total height: 21mm. Including sample stud fixed to sample.

BERKOVICH DIAMOND FOR UNHT3/NHT3

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 145265

Mechanical Surface Testing Platforms:
Step 

More info
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months