Otomatik Akış Kemisorpsiyon Analiz Cihazı:
ChemBET Pulsar
- Programlanabilir analiz dizileri eklenmiş otomasyon, işinizden kurtulmanıza yardımcı olur
- Otomatik döngü enjektörleri, pulse titrasyonu ve sıcaklık programlı analiz insan müdahalesini en aza indirir.
- Asgari düzeyde tezgah alanı gereklidir
ChemBET Pulsar, uygun fiyatı ve otomasyonu, kompakt bir tezgah üstü katalizör karakterizasyon ünitesinde bir arada sunar. Otomatik döngü enjektörü, gaz değiştirme ve fırın sıcaklığı artırma ile birlikte programlanabilir analiz işlem dizileri, en az kullanıcı müdahalesi ile pals titrasyon ve sıcaklık-programlı analizlerin kolayca yapılmasını sağlar. Üst düzey katalizör karakterizasyon üniteleriyle karşılaştırılabilecek tepe ters evrişim dahil olmak üzere gelişmiş veri küçültme paketi standart olarak gelmektedir.
Teknik özellikler
| Örnek istasyonları | 1 analiz ve 1 özel gaz giderme |
| Tipik örnek boyutu | 0.1g ile 1.0 g arası |
| Sıcaklık aralığı | Ortam sıcaklığı ile 1100 °C |
| Sıcaklık artış hızı | 1 °C/dk ile 50 °C/dk arasında |
| Fırın soğutma | Dahili fan |
| Gaz girişleri | 4 analiz ve 1 kalibrasyon |
| Örnek hücresi | Yüksek sıcaklıkta kimyasal sorpsiyon için kuartz U-tüpü |
| Ana detektör | Oksidasyon ve amonyağa dirençli (W/Re) 2-filament TCD |
| Boyutlar ( G x Y x D) | 45.2 cm x 63 cm x 41.4 cm (18 in x 25 in x 16 in) |
| Standart özellikler | Sıcaklık Programlı Desorpsiyon (TPD) Sıcaklık Programlı İndirgeme (TPR) Sıcaklık Programlı Oksidasyon (TPO) Sıcaklık Programlı Reaksiyon (TPRx) Katalizör İşleme Dinamik BET Yüzey Alanı Pulse Titrasyon Pulse Kalibrasyon |
Anton Paar Onaylı Hizmet
- Dünya çapında 350'den fazla üretici onaylı teknik uzman
- Yerel dilinizde nitelikli destek
- Yatırımınız için yaşam döngüsü boyunca koruma
- 3 yıl garanti
Belgeler
-
Advanced sorption suite Broşürler
-
ChemBET Pulsar Brochure Broşürler
-
NEW HORIZONS IN PARTICLE ANALYSIS Broşürler
-
Catalyst Characterization - From Fresh to Spent Uygulama Raporları
-
Chemical Adsorption on Zeolite Catalysts Uygulama Raporları
-
Graphene Characterization Uygulama Raporları
Tamamlayıcı ürünler
İhtiyaç duyduğunuz öğeyi bulamazsanız, lütfen Anton Paar satış temsilcinizle iletişime geçin.
MANTLE, MALE INLET, 1 PHONO
Standard sized mantle (5cm internal width) with maximum continuous operating temperature of 350 C. Single phono jack thermocouple, instrument (IEC320) style power plug (male inlet). Only accommodates one standard sized cell at a time. Compatible instrument models include Monosorb (models 21 and newer), ThermoFlow, ChemBET, Autosorb 1, and Autosorb Degasser
MANTLE, LG, MALE INLET, 2 PHONO
Large pocket mantle (7.5 cm internal width) with maximum continuous operating temperature of 350 C. Dual phono jack thermocouple, instrument (IEC320) style power plug (male inlet). Required for non- standard cells that do not comfortably fit inside the standard sized mantle or to accommodate 2 large bulb cells. Compatible instrument models include Monosorb (models 21 and newer), ThermoFlow, ChemBET, Autosorb 1, Autosorb Degasser, and Autosorb iQ.
CALIBRATION SYRINGE, 1.00 mL
GROUNDED THERMOCOUPLE ASSEMBLY
TYPE F CELL HOLDER, 6 mm, EPDM
Dual quick connect sample cell holder for type F sample cells. Includes 6 mm cell adapters and 6 mm EPDM o-rings.
THERMOCOUPLE CABLE
CHEMISORPTION REFERENCE MATERIAL, 7001
CHRM 7001, Platinum on Alumina validates static and flow Chemi systems. 2% Pt sample with certified nominal value of 30% metal dispersion. Need Helium and Hydrogen gases in flow cell and a furnace. Minimum 1 g. Grey pellets for 2 runs, each reusable 3 times.
MANTLE, MALE INLET, 2 PHONO
Standard sized mantle (5 cm internal width) with maximum continuous operating temperature of 350 C. Dual phono jack thermocouple, instrument (IEC320) style power plug (male inlet). Only accommodates one standard sized cell at a time. Compatible instrument models include Monosorb (models 21 and newer), ThermoFlow, ChemBET, Autosorb 1, Autosorb Degasser, and Autosorb iQ (models 5 and older).
MANTLE, LG, MALE INLET, 1 PHONO, QUARTZ
Standard sized mantle (5 cm internal width) with maximum continuous operating temperature of 450°C (with quartz sample cells). Single phono jack thermocouple with one instrument (IEC320) style power plug (male inlet). Only accommodates one standard sized cell at a time. Compatible instrument models include Monosorb (models 21 and newer), ThermoFlow, ChemBET, Autosorb 1, Autosorb Degasser, and XeriPrep.
TYPE F CELL, 6 mm MESO, CAPILLARY
Type F meso cell with capillary stem. Borosilicate glass. Nominal Dimensions: 6 mm OD (4 mm ID), cell length 115.5 mm, 4.8 cm3 capacity
TYPE G CELL HOLDER, 6 mm, EPDM
Dual quick connect sample cell holder with thermocouple port. For use with 6 mm type G sample cells. Includes 6 mm cell adapters and 6 mm EPDM o-rings.
CALIBRATION SYRINGE NEEDLE, 1 cm3
MANTLE, LG, MALE INLET, 1 PHONO
Large pocket mantle (7.5 cm internal width) with maximum continuous operating temperature of 350 C. Single phono jack thermocouple with additional thermocouple coiled (not used) to be used as a spare. Instrument (IEC320) style power plug (male inlet). Required for non- standard cells that do not comfortably fit inside the standard sized mantle or to accommodate 2 large bulb cells. Compatible instrument models include Nova-e and XeriPrep Degasser.
PULSE LOOP, 1/8 INCH, 100 µL
PULSE LOOP, 1/8 INCH, 50 µL
TYPE F CELL, 6 mm MACRO
Type F macro cell. Borosilicate glass. Nominal Dimensions: 6 mm OD (4 mm ID), cell length 123 mm, 12.5 cm3 capacity
CHEMISORPTION REFERENCE MATERIAL, 7002
CHRM 7002, Calcium oxalate validates chemi flow and Mass Spec systems. TCD peaks over temperature profile. MS identifies as water, CO and CO2. Need Helium gas in flow cell with a furnace. Minimum 0.07 g. Vial for 2 runs of non reusable white powder.
SURFACE AREA REFERENCE MATERIAL, 2003
SARM 2003, Aluminum oxide used to validate low surface area sorption. Certified value of Specific Surface Area of nominally 0.5 m2/g. Need He and N2 (or Kr) gas and liquid nitrogen. Minimum 5 g (or 0.6 g). One bottle contains 11 g sample of white pellets for 11 point BET.
DEWAR, 350 mL
TYPE B LONG CELL, 12 mm SM BULB
Type B long cell with 12 mm stem and small bulb. Borosilicate Glass. Nominal Dimensions: 12 mm OD (10 mm ID), cell length 283 mm, bulb diameter 16 mm, 1 cm3 capacity.
VACUUM GREASE .25 OUNCE
SEPTUM [PACK OF 2]
O-RING, BUNA 010, BLACK, PACK OF 2
O-RING, BUNA 015, BLACK, PACK OF 2
TYPE G CELL, 6 mm MESO, QUARTZ
Type G cell for chemisorption applications including temperature programmed analyses and pulse titrations. Quartz for temperatures above 350 degC.
QUARTZ WOOL, PACK OF 2.5 g
TYPE F CELL, 6 mm MESO
Type F meso cell. Borosilicate glass. Nominal Dimensions: 6 mm OD (4 mm ID), cell length 115.5 mm, 4.8 cm3 capacity
TYPE F CELL, 6 mm MESO, QUARTZ
Type F meso cell. Quartz for temperatures above 350 C. Nominal Dimensions: 6 mm OD (4 mm ID), cell length 115.5 mm, 4.8 cm3 capacity
