This is a required field.
Invalid
Part number
Error in validation!

Inline Refractometer:
L-Rix

  • L-Rix inline refractometer with a stainless steel housing, one unit showing the sensor side and the other displaying measurement data on a digital screen.
  • L-Rix inline refractometer mounted on a stainless steel pipe, displaying real-time refractive index and temperature measurements on its screen.
  • L-Rix inline refractometer with a stainless steel housing, shown in two positions along with a tri-clamp connector for hygienic installation
  • L-Rix inline refractometer mounted on a stainless steel pipe, connected to the Edge 7000 evaluation unit displaying real-time Brix, refractive index, and temperature measurements on its touchscreen interface.
  • media
  • L-Rix inline refractometer with a stainless steel housing, one unit showing the sensor side and the other displaying measurement data on a digital screen.
  • L-Rix inline refractometer mounted on a stainless steel pipe, displaying real-time refractive index and temperature measurements on its screen.
  • L-Rix inline refractometer with a stainless steel housing, shown in two positions along with a tri-clamp connector for hygienic installation
  • +5
  • 360°
Model:
  • 0 to 80 °Brix-range model with ±0.1 °Brix accuracy
  • Maintenance-free
  • Transmitter with standard °Brix formula
  • Integrated analog outputs and HMI

Durable, maintenance-free inline refractometer for real-time concentration measurements and production control of raw, intermediate, and final products. Industry-leading optics and maintenance-free operation with full CIP/SIP capability.

Key features

Maintenance-free – forget servicing and operating costs

The inline refractometer L-Rix 4100/5100/5200 uses industry-leading optics which dramatically extends the instrument’s service life, increases reliability and safety, and reduces costs. Once adjusted at the factory, L-Rix 4100/5100/5200 operates with the stored adjustment values for its entire lifetime. Benefit from “install and forget” simplicity and years of continuous operation.

Inline and highly accurate – real-time concentration measurement where it matters most

L-Rix 4100/5100/5200 provides continuous, real-time concentration results analogous to those of laboratory refractometers. It gives you automatic control and monitoring of your process – at precisely the right point.

Robust – for minimized downtime

Rigid stainless-steel housing for robust measurements under adverse process conditions, along with ingress protection of the enclosure, shield against water jets and immersion. Once CIP/SIP routines are completed, the sensor reactivates in just minutes, to minimize downtime.

Plug and play – easy setup with maximum compatibility

No special training is required to set up and operate the instrument. L-Rix 5100/5200 is set up quickly and easily using the touchscreen interface of the built-in evaluation unit, via the Pico 3000 software, or Edge 7000/5000 process controller, while L-Rix 4100 comes ready with analog outputs and a touchscreen interface.

The sensors provide user-friendly diagnostics based on standard status categories according to NAMUR NE 107. Modular and expandable, L-Rix 5100/5200 can be easily adapted to support several communications protocols including analog (4 mA to 20 mA), Modbus RTU, Modbus TCP, PROFIBUS DP, PROFINET IO, and EtherNet/IP.

Specifications

 L-Rix 4100L-Rix 5100L-Rix 5200
Refractive IndexRange: 1.3100 to 1.4910
(equivalent to 0 % to 80 % mass)

Accuracy: nD ±0.0002
(equivalent to ±0.1 % mass)

Repeatability: nD ±0.0001
(equivalent to ±0.05 % mass)
Range: 1.3100 to 1.5400
(equivalent to 0 % to 100 % mass)

Accuracy: nD ±0.0002
(equivalent to ±0.1 % mass)

Repeatability: nD ±0.0001
(equivalent to ±0.05 % mass)
Range: 1.3100 to 1.4600
(equivalent to 0 % to 65 %)

Accuracy: nD ±0.0001
(equivalent to ±0.05 % mass)

Repeatability: nD ±0.00005
(equivalent to ±0.025 % mass)
CalibrationAnton Paar‘s proprietary calibration routine using high-purity water and commercial nD references
Material of the wetted partsStainless steel 1.4404, PEEK, Sapphire (Al 2O 3 – 99.997 %), O-ring 60x3 (VARIVENT N) EPDM 70
Ambient temperature0 °C to 50 °C-20 °C to 60 °C
Process temperature0 °C to 100 °C-20 °C to 120 °C0 °C to 105 °C
 CIP/SIP up to 145 °C for 30 minutes
Process pressure absolute100 mbar to 10 bar100 mbar to 16 bar (10 bar @ >120 °C)
DetectorCMOS line sensor; 2048 elements
Light sourceLED 589 nm
Temperature compensationAutomatic temperature compensation; integrated Pt-100
Process connectionsTuchenhagen VARIVENT ® Type NTuchenhagen VARIVENT ® Type N, Tri-Clamp ® 3‘‘
Degree of protectionIP65; IP67 / NEMA 6P
CommunicationAnalogAnalog, Analog/Digital, Modbus RTU, Modbus TCP, PROFIBUS DP, PROFINET IO, EtherNet/IP

Anton Paar Certified Service

The Anton Paar quality in service and support:
  • More than 350 manufacturer-certified technical experts worldwide
  • Qualified support in your local language
  • Protection for your investment throughout its lifecycle
  • 3-year warranty
Learn more

Documents

Categories
Industry
Application
Your choice: Reset all filters

No results found!

See more

Accessories

Accessories

Accessories

Accessories

Not all items are purchasable online in specific countries.

To find out if you can purchase online from your location, check the online availability below.

High Performance Process Controller:
Edge 

Compatible with:
L-Rix 4100 | 5100 | 5200
More info
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months

High Performance Process Controller:
Edge 7000

Compatible with:
L-Rix 4100 | 5100 | 5200
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 241365
Product details
  • Cutting-edge performance with a 10.1-inch projective, multitouch display
  • Long-term security and flexibility with a Linux-based operating system
  • Intel® Atom® Processor power for unbeatable control
  • Industrial-grade, fan-less design for reliability and durability
  • Onboard communication with various fieldbus interfaces

More info

High Performance Process Controller:
Edge 5000

Compatible with:
L-Rix 4100 | 5100 | 5200
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 256078
Product details
  • Streamlined configuration without display (optional remote HMI)
  • Linux-based operating system for long-term security and adaptability
  • Unparalleled control power with an Intel® Atom® Processor
  • Industrial-grade, optimized for cabinet integration (fan-less, DIN rail)
  • Onboard communication with various fieldbus interfaces

More info