This is a required field.
Invalid
Part number
Error in validation!
MCR Tribology Cell:
T-BTP
- Based on the ball-on-three-plates measuring principle
- Excellent temperature control from -160 to +600 °C
- Adjustable spring stiffness in z-direction
- Normal force range expanded down to 0.1 N
The accessory T-BTP extends the advantages of the ball-on-three-plates setup to the temperature range of -160 to 600 °C. Further, an optimization of the self-aligning mechanisms broadens the range of the applicable normal forces. The normal force range acting on the specimens is expanded down to 0.1 N. Also as a new feature, the spring stiffness in z-direction is adjustable.
Key features
Technical features
- Self-aligning ball-on-three-plates setup
- Temperature control: excellent temperature control from -160 to 600 °C for all options
- Maximum torque: 300 mNm
- Sliding speed control between 10-8 and 1.4 m/s
- Adjustable spring stiffness in z-direction
Software
- Flexible test definition in rotation and oscillation
- Pre-defined workbooks for tribological measurements
Technical specifications
| T-BTP | ||
|---|---|---|
| Tribological normal force FN,Tribo | 0.1 N to 70 N | |
| Sliding speed vs | 10⁻⁸ m/s to 1.4 m/s | |
| Speed U | 10⁻⁶ rpm to 3000 rpm | |
| Temperature T | CTD 180: -20 °C to 180 °C | |
| Deflection angle φ | 1 µrad to ∞ µrad | |
| Contact types | Point | |
| Specimen sizes | 12.7 mm setup Ball: 12.7 mm Plates (L x W x H): 15 mm x 6 mm x 3 mm Pins (diameter, length): 6 mm, 6 mm | |
Anton Paar Certified Service
The Anton Paar quality in service and support:
- More than 350 manufacturer-certified technical experts worldwide
- Qualified support in your local language
- Protection for your investment throughout its lifecycle
- 3-year warranty
