This is a required field.
Invalid
Part number
Error in validation!

Sample Changer:
Xsample 330

  • media
  • media
  • +3
  • The single sample changer for a wide range of samples
  • Prevents sample carry-over with automatic rinsing and drying after each sample
  • Highly resistant wetted parts for handling aggressive samples

The new industrial grade peristaltic pump in combination with automatic cleaning makes Xsample 330 perfectly suitable for measuring single low-viscosity samples with widely different properties in direct succession. Once measured, the sample is drained or recovered and the system is automatically cleaned with up to two cleaning agents. A drying step is performed by the operator to perfectly prepare the measurement cell(s) for the next sample.

Key features

Automatic cleaning

Automatic cleaning

  • Automatic rinsing and drying after each sample for perfect preparation of the system
  • Up to two different cleaning agents can be used in any order for an individual cleaning procedure.
  • Advanced settings for cleaning procedures to increase measuring performance
For a wide range of samples

For a wide range of samples

  • Filling with peristaltic pump covers a wide range of different sample viscosities up to 3,000 m.Pas
  • All wetted parts of Xsample 330 (high resistance) are made of durable materials for aggressive samples, such as phosphoric acid or trichloroacetic acid
  • Adjustable filling modes for different types of samples enable perfect measuring results
Highly efficient sample handling and easy operation

Highly efficient sample handling and easy operation

  • Depending on the system size, only a minimum amount of sample volume is needed to perform a measurement
  • Easy operation by an integrated user interface on the master instrument
  • Straightforward measurements of different sample viscosities due to a sensor-controlled stop of the filling procedure
  • Automatic sample recovery returns expensive or hazardous samples back to their vials

Technical specifications

Viscosity rangeup to 3,000 mPa•s at ambient and measuring temperature¹
Filling mode

with peristaltic pump:

  • Suction mode in one direction
  • Suction mode with pumping back and forth at the beginning
Typical time for filling and measuring cycle2 to 5 minutes
Minimum sample volumeapprox. 10 mL to 20 mL
Compressed air supplymax. 2 bar (29 psi) relative
Quality of air necessaryClass 3 according to ISO 8573-1:
max. particle size: 5 μm
max. pressure dew point: –20 °C (–4 °F)
max. oil content: 1 mg/m³
Environmental conditions (EN 61010)indoor use only
Operating temperature+15 °C to +35 °C (+59 °F to +95 °F)
Pollution degree2
Over voltage categoryII
Altitudemax. 3,000 m (9,840 ft)
Power supplysupplied by the master instrument
AC power supply voltage according to technical data plate at the rear of the master instrument (protective grounding required)
Dimensions excl. master instrument (L x W x H)205 mm x 148 mm x 205 mm (8.1 in x 5.8 in x 8.1 in)
Weight excl. master instrumentapprox. 3.8 kg (8.4 lbs)

¹ Recommended for samples with a viscosity up to 500 mPa•s at ambient and measuring temperature. For samples with a viscosity higher than 500 mPa•s at ambient and measuring temperature, bubbles may occur during filling.

Anton Paar Certified Service

The Anton Paar quality in service and support:
  • More than 350 manufacturer-certified technical experts worldwide
  • Qualified support in your local language
  • Protection for your investment throughout its lifecycle
  • 3-year warranty
Learn more

Documents

Compatible instruments

Industry
Applications
Standards
Your choice: Reset all filters

Consumables

Consumables

Not all items are purchasable online in specific countries.

To find out if you can purchase online from your location, check the online availability below.

BOTTLE FOR RINSING LIQUID

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 21312

HOSE 220x3x2 FEP 2x1/4"-28 UNF "CC"

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 25540

"HOSE 163x3x2 PTFE 2x1/4""-28 UNF"

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 175202

HOSE 710x3x2 PTFE 2x1/4"-28 UNF

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 224314

HOSE 3.2x6.4 mm TYGON A-60-G, BLACK (FORMERLY:
NORPRENE A-60-G) 

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 93982

INLET FILTER FOR SOLVENT 20µm

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 88159

FERRULE WITH SCREW JOINT

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 21826

"HOSE 750x3x2 PTFE 1x1/4""-28 UNF" "labeled with ""Rinse"""

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 110156

CHECK VALVE SILICONE HOSE 3X5

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 166080

"HOSE 190x3x2 PTFE ""A"""

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 78453

TUBE CLIP SET FOR 2mm (9QQ)

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 189750

TUBE CLIP SET FOR 3 AND 3.5mm (9QQ)

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 186257

HOSE 3.2x6.4 mm TYGON CHEMICAL (FORMERLY:
NORPRENE CHEMICAL) 

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 93980
Product details
For use with Xsample modules from Serial Nr. 80977476 - 81464920 please contact Anton Paar GmbH.

HOSE 2.5 x 4.5 NOVOPRENE

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 100297