This is a required field.
Invalid
Part number

Sample changer:
Xsample 330

  • The single sample changer for a wide range of samples
  • Prevents sample carry-over with automatic rinsing and drying after each sample
  • Highly resistant wetted parts for handling aggressive samples
Online price only | excl.incl. 0VAT
Price
upon request
Purchase information
Buy Anton Paar instruments online
Part number: 184370
Check online availability Get a quote Buy this product online
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months

The new industrial grade peristaltic pump in combination with automatic cleaning makes Xsample 330 perfectly suitable for measuring single low-viscosity samples with widely different properties in direct succession. Once measured, the sample is drained or recovered and the system is automatically cleaned with up to two cleaning agents. A drying step is performed by the operator to perfectly prepare the measurement cell(s) for the next sample.

Key features

Automatic cleaning

Automatic cleaning

  • Automatic rinsing and drying after each sample for perfect preparation of the system
  • Up to two different cleaning agents can be used in any order for an individual cleaning procedure.
  • Advanced settings for cleaning procedures to increase measuring performance
For a wide range of samples

For a wide range of samples

  • Filling with peristaltic pump covers a wide range of different sample viscosities up to 3,000 m.Pas
  • All wetted parts of Xsample 330 (high resistance) are made of durable materials for aggressive samples, such as phosphoric acid or trichloroacetic acid
  • Adjustable filling modes for different types of samples enable perfect measuring results
Highly efficient sample handling and easy operation

Highly efficient sample handling and easy operation

  • Depending on the system size, only a minimum amount of sample volume is needed to perform a measurement
  • Easy operation by an integrated user interface on the master instrument
  • Straightforward measurements of different sample viscosities due to a sensor-controlled stop of the filling procedure
  • Automatic sample recovery returns expensive or hazardous samples back to their vials

Technical specifications

Xsample™ 330 (High-resistance)

Viscosity range up to 3,000 mPa•s at ambient and measuring temperature¹
Filling mode with peristaltic pump:
  • Suction mode in one direction
  • Suction mode with pumping back and forth at the beginning
Typical time for filling and measuring cycle 2 to 5 minutes
Minimum sample volume approx. 10 mL to 20 mL
Compressed air supply max. 2 bar (29 psi) relative
Quality of air necessary Class 3 according to ISO 8573-1:
max. particle size: 5 μm
max. pressure dew point: –20 °C (–4 °F)
max. oil content: 1 mg/m³
Environmental conditions (EN 61010) indoor use only
Operating temperature +15 °C to +35 °C (+59 °F to +95 °F)
Pollution degree 2
Over voltage category II
Altitude max. 3,000 m (9,840 ft)
Power supply supplied by the master instrument
AC power supply voltage according to technical data plate at the rear of the master instrument (protective grounding required)
Dimensions excl. master instrument (L x W x H) Xsample™ 330 Xsample™ 330 High-resistance  205 mm x 148 mm x 185 mm
(8.1 in x 5.8 in x 7.3 in)
205 mm x 148 mm x 205 mm
(8.1 in x 5.8 in x 8.1 in)
Weight excl. master instrument
Xsample™ 330
Xsample™ 330 High-resistance
 
approx. 3.7 kg (8.2 lbs)
approx. 3.8 kg (8.4 lbs)

¹ Recommended for samples with a viscosity up to 500 mPa•s at ambient and measuring temperature. For samples with a viscosity higher than 500 mPa•s at ambient and measuring temperature, bubbles may occur during filling.

Anton Paar Certified Service

The Anton Paar quality in service and support:
  • More than 350 manufacturer-certified technical experts worldwide
  • Qualified support in your local language
  • Protection for your investment throughout its lifecycle
  • 3-year warranty
Learn more

Documents

Use the Document Finder to see all the documents for this product

Compatible instruments

Consumables & Software

Consumables & Software

Software

Software

Not all items are purchasable online in specific countries.

To find out if you can purchase online from your location, check the online availability below.

Online price only | excl.incl. 0VAT

Check valve silicone hose 3X5

Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 166080

Ferrule with screw joint

Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 21826

Hose 190x3x2 PTFE "A"

Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 78453

Hose 2.5 x 4.5

Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 100297

Hose 750x3x2 PTFE 1x1/4"-28 UNF

Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 110156

Ilet filter 20µm

Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 88159

Tube clip set for 2mm (9QQ)

Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 189750

Tube clip set for 3 AND 3.5mm (9QQ)

Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 186257

Lab execution software:
AP Connect

Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Product details:
  • Digital flow of information, no manual data handling needed
  • Saves time and eliminates reading and transcription errors
  • All your information available in one place and at any time
  • Communicate with your existing data management systems via a customizable interface

More info