Atmospheric Distillation Analyzer:
Diana 700
-
-
-
- +8
- High-precision distillation unit for fuels and solvents
- Indestructible vapor temperature sensor that lasts forever
- Accelerated cooling between measurements means you save time and can start the next measurement right away
- Guides you step-by-step through the setup for distillation
Diana 700 is the ideal solution for automatically performing high-precision distillation range analysis at atmospheric pressure. Typical samples to be characterized include petrochemical products, aromatic hydrocarbons as well as other volatile organic liquids.
The combination of premium technology and distinguished features leads to unrivaled ease of use, high efficiency, and safe operation.
Key features
Smart operator assistance
Diana 700 automates manual handling steps during the measurement setup to provide maximum support. Additionally, for untrained users the innovative user interface employs illustrations as a step-by-step guide through the procedure that is necessary to start a distillation. For experienced users, the advanced mode just shows the state of each component of the instrument and enables a fast start of the distillation. The intelligent condition monitoring system controls all steps and Diana 700 only allows you to start a measurement if all steps have been completed correctly. This helps you avoid having to repeat a measurement due to an incorrect setup or non-compliance with the standard.
Convenient handling: Mobile multi-plug with indestructible temperature sensor
For a perfect operator experience and to increase the usability of the instrument, the vapor temperature sensor was combined with the flask holder. The resulting multi-plug is available in two variants: with the indestructible temperature sensor made of metal or with the classical sensor made of glass. Install the distillation flask (125 mL or 200 mL) in the correct position with just one hand and within seconds.
The integrated data memory stores the calibration data of the temperature sensor which is automatically applied when the sensor is mounted to the instrument.
Operator convenience meets safety: Intelligent design for automated handling
As soon as the distillation flask has been mounted the heater and the protection shield move up fully automatically. The correct flask and flask support board are identified by the instrument and the distillation can only be started if the correct type is selected.
For a maximum level of safety, the automatic shield lift surrounds the flask, reducing the risk of touching any hot parts while a measurement is running. After finishing the test, the heater moves down to accelerate the cooling of the flask. This means you save time and can start your next measurement right away.
Efficient and easy to operate: The receiving chamber
You can operate the receiving chamber of Diana 700 smoothly to access the receiving cylinder. Thanks to the tight jacketing of the cylinder, the chamber guarantees an excellent stability of the sample and cylinder temperature.
Using the highly efficient Peltier technology, Diana 700 enables a fast switch between different ASTM D86 distillation groups and reaches the required temperatures in less than five minutes.
A unique cold trap prevents condensation caused by high humidity and reduces evaporation losses of volatile organic compounds (VOC) at the same time.
Highly accurate volume reading
The volume detection of the atmospheric distillation unit Diana 700 makes use of the high accuracy of contact imaging sensor technology (CIS) to achieve a precise determination of the sample volume. This technology has no moving parts to avoid malfunction of the instrument and is able to continuously follow the liquid level in the cylinder. Additionally, the volume is measured by the instrument before the test starts and corrected to 100 % volume, if necessary.
Technical specifications
| Tempering system | Liquid-free Peltier cooling technology |
| Temperature range | Up to 450 °C vapor temperature, resolution: 0.1 °C 0 °C to 80 °C condenser temperature 0 °C to 60 °C chamber temperature |
| Measuring system | Pt100 vapor temperature sensor, class A (metal or glass) Volume detection by contact imaging sensor technology |
| Sample volume | Volume range: 0 mL to 103.5 mL, resolution: 0.01 mL Accuracy: ±0.1 mL |
| Safety |
|
| Interfaces | USB, LAN |
| Display | 10" TFT, PCAP touchscreen |
| Gas supply | N2 or CO2 (4 bar to 6 bar) |
| Power supply | 90 V to 240 V, 50 Hz/60 Hz, 900 W |
| Dimensions | 406 mm x 525 mm x 645 mm (W x D x H) |
| Weight | approx. 40 kg |
| Other special functions |
|
Standards
ABNT
ASTM
DIN
GOST
IP
ISO
RANP
Anton Paar Certified Service
- More than 350 manufacturer-certified technical experts worldwide
- Qualified support in your local language
- Protection for your investment throughout its lifecycle
- 3-year warranty
Documents
-
Application Report: Testing of Renewable Fuels Application Reports
-
Diana 700: Determination of Ethanol Content in Alcoholic Beverages Application Reports
-
Diana 700: Distillation of Gasoline/Diesel Mixtures Application Reports
-
CoC Diana 700 Multi-Plug Adjustment Manager Version 1.0.2 Software and Firmware
-
Diana X00 - Cleanup Script (v1.8.2) Software and Firmware
-
PC Software - Diana 700: Multi-Plug Adjustment Manager v1.0.2 Software and Firmware
-
Release Notes - Diana 700 (SW v1.9.0) Software and Firmware
Consumables
Consumables
If you do not find the item you require, please contact your Anton Paar sales representative.
To find out if you can purchase online from your location, check the online availability below.
RECEIVING CYLINDER STAND, MAGNETIC
GRADUATED (RESIDUE) CYLINDER, 5 mL
FLASK SUPPORT BOARD, HOLE d = 32 mm, 83 x 83 x 5 mm, CERAMIC GLASS
FLASK SUPPORT BOARD, HOLE d = 38 mm, 83 x 83 x 5 mm, CERAMIC GLASS
FLASK SUPPORT BOARD, HOLE d = 50 mm, 83 x 83 x 5 mm, CERAMIC GLASS
FLASK SUPPORT BOARD, HOLE d = 25 mm, 83 x 83 x 5 mm, CERAMIC GLASS
BOILING STONES, CERAMIC, 200 g
MULTI-PLUG, METAL Pt100 (FOR 100/125 mL FLASK)
DISTILLATION FLASK 2 (PACK OF 10), 125 mL, ASTM E133/B, BOROSILICATE GLASS
TEST KIT FUEL, ASTM D86 (Diana 700)
- 1 multi-plug with metal-Pt100 (P/N 237547)
- 1 receiving cylinder, 100 mL, magnetic base (P/N 195234)
- 2 distillation flasks, 125 mL (P/N 186744)
- 1 flask support board, hole diameter 38 mm (P/N 184290)
- 1 flask support board, hole diameter 50 mm (P/N 194645)
TOUCHSCREEN STYLUS
TEST KIT SOLVENT, ASTM D850/D1078, METAL SENSOR (Diana 700)
- 1 multi-plug with metal Pt100 and dry point sensor (for 200 mL flasks) (P/N 242661)
- 2 distillation flasks with a volume of 200 mL (P/N 186746)
- 1 receiving cylinder, 100 mL, magnetic base (P/N 195234)
- 1 flask support board, hole diameter 25 mm (P/N 194646)
- 1 flask support board, hole diameter 32 mm (P/N 184289)
- 1 flask support board, hole diameter 38 mm (P/N 184290)
- 1 flask support board, hole diameter 50 mm (P/N 194645)
DISTILLATION FLASK 2, 125 mL, ASTM E133/B, BOROSILICATE GLASS
CLEANING WICK, 12 THREADS, PACK OF 8
CONDENSER CLEANING TOOL
SPARE PART SET FUEL, ASTM D86
- 1 multi-plug with metal-Pt100 (P/N 237547)
- 5 condenser tube stoppers (P/N 191097)
- 10 distillation flasks, 125 mL (P/N 186744)
- 1 flask support board, hole diameter 38 mm (P/N 184290)
- 1 flask support board, hole diameter 50 mm (P/N 194645)
- 2 receiving cylinder, 100 mL, magnetic base (P/N 195234)
- 2 receiving cylinder stands (magnetic) (P/N 196784)
- 2 drip plates (P/N 194531)
- 1 residue cylinder, 5 mL (P/N 172676)
- 1 condenser cleaning tool (P/N 210173)
- 1 condenser cleaning material (P/N 218603)
DRY POINT MULTI-PLUG, GLASS Pt100 (FOR 200 ml FLASK)
MULTI-PLUG, GLASS Pt100 (FOR 100/125 mL FLASK)
GRADUATED RECEIVING CYLINDER 2, 100 mL, MAGNETIC BASE
DRIP PLATE 2
CONDENSER TUBE SEALING CAP
DISTILLATION FLASK 2, 200 mL, ASTM E133/C, BOROSILICATE GLASS
DISTILLATION FLASK 2, 100 mL, ASTM E133/A, BOROSILICATE GLASS