Recommended Results

standardsiation and testing institutes

Standardisation and Testing Institutes

Standardization and testing institutes provide consumers, industries and governments around the world with fine-tuned quality and safety, while supporting economic growth and facilitating trade. With their peak precision and high repeatability, analytical solutions by Anton Paar have become approved means of reference in this field. Find the measuring instrument that meets your particular needs in the instrument list below – or let us help you find the best solution by contacting us directly.

Get in touch

Anton Paar Products

Your choice: Reset all filters X
Type of operation
Standards
Product Group
Device type
Showing to of

No results found!

Abbemat Heavy Duty

Abbemat Heavy Duty Line

Abbemat WR/MW, Multi wavelengt refractometer

Abbemat MW Multiwavelengths Refractometer

Abbemat Performance and Performance Plus

Abbemat Performance and Performance Plus Line

With its extended low temperature range the automatic Abel closed cup tester can measure flash points or detect flammable vapors by the flash/no flash method

Abel Flash Point Tester: ABA 4

Atmospheric Distillation Analyzer: Diana 700

Automatisches Verdünnungs- und Dosiersystem DDS

Automatic Dilution and Dosage System: DDS

Benchtop Heating Stage BTS 500

Benchtop Heating Stages: BTS 150 | BTS 500

Cora 7X00 Raman Spectrometer with Fiber-optic probe

Benchtop Raman spectrometers: Cora 7X00

Calotest Compact (CAT²c)

The automatic Cleveland open cup tester features a fire extinguishing device, automatic relighting and a skin removal device for bitumen.

Cleveland Flash & Fire Point Tester: CLA 5

Cold Filter Plugging Point Tester Callisto 100 with digital display

Cold Filter Plugging Point Tester: Callisto 100

Laboratory system Sucrolyser

Computerized Laboratory System: Sucrolyser / Eco Sucrolyser

Computerized System for Quality Analysis of Sugar Beet: Betalyser

Density meter: DMA™ 501

Density meter: DMA™ 4100 M

Density meter: DMA™ 4500 M

Density meter: DMA™ 5000 M

Fraass Breaking Point Tester BPA 5 with bitumen coated plaque.

Fraass Breaking Point Tester: BPA 5

Two-place grease working machine with stroke counter.

Grease Working Machine: GWM 5

Gum Content Tester: GUM

Handheld density meter: DMA 35 Basic

DH 5 Herschel emulsifier with accessories for 8 test places

Herschel Emulsifier: DH 5

HPA-S represents the ultimate performance in wet chemical high pressure digestion sample preparation for AAS, ICP and Voltammetry. The HPA-S acid digestion method is an internationally recognized reference procedure and is in operation as a high-performance routine instrument in numerous laboratories.

High Pressure Digestion: HPA-S High Pressure Asher

Temperature Tribometer

High Temperature Tribometer (THT)

High Temperature Ultra Nanoindentation (UNHT³ HTV)

High-precision thermometers: MKT 50 and MKT 10

Litesizer™ 100

MCP 100 Modular Circular Polarimeter

MCP 150

MCP 150 Modular Compact Polarimeter

Surface Testing Platform for scratch (Micro Scratch, MST³) and indentation (Microindentation, MHT³ and Ultra Nano indentation, UNHT³) in order to identify coating adhesion, scratch resistance, hardness and elastic modulus of materials.

Micro Combi Tester (MCT³)

Micro Scratch Tester (MST³)

Microindentation Tester (MHT³)

Rotor 16SOLV HF100 expands the possibilities of Multiwave PRO for the microwave-assisted digestion and extraction of inorganic and organic samples and is easily upgraded for acid digestion applications by interchanging screw caps.

Microwave Digestion and Extraction: Rotor 16SOLV HF100

Rotor 16SOLV MF100 expands the possibilities of Multiwave PRO for the microwave-assisted digestion and extraction of inorganic and organic samples and is easily upgraded for acid digestion applications by interchanging screw caps.

Microwave Digestion and Extraction: Rotor 16SOLV MF100

The acid digestion rotor 16HF100 with 16 high pressure vessels is designed for high sample throughput and efficient handling.

Microwave Digestion: Rotor 16HF100

The acid digestion rotor 16MF100 with 16 pressure vessels is designed for high sample throughput and efficient handling.

Microwave Digestion: Rotor 16MF100

Rotor 8EVAP is an innovative accessory for microwave evaporation with the modular Multiwave PRO microwave sample preparation system. It greatly simplifies and accelerates the microwave-assisted evaporation of acids and concentration of aqueous sample solutions in 8 vessels simultaneously.

Microwave Evaporation: Rotor 8EVAP

The Multiwave PRO microwave reaction system serves two groups: professionals in trace analysis and synthetic chemistry.

Microwave Reaction System: Multiwave PRO

Rotor 1DRY is the ideal accessory for efficient handling of samples prior to digestion. Microwave-assisted drying takes a quarter of the time required by conventional methods, without carbonization or contamination of samples.

Microwave-assisted Drying: Rotor 1DRY

Monowave 450: Automated Microwave-assisted Extraction

Nano Scratch Tester (NST³)

Nanoindentation Tester (NHT³)

Oxidation Stability Tester OBA 1 consisting  of a bath, 4 pressure vessels and digital manometers

Oxidation Stability Tester: OBA 1

The automatic Pensky-Martens closed cup tester features a fire extinguishing device, a patented connection system, gas and electric ignition.

Pensky-Martens flash point tester: PMA 5

Cora 5X00 Raman Spectrometer

Portable benchtop Raman spectrometers: Cora 5X00

Portable density meter: DMA 35

The pressure sensor accessory allows for precise reaction control within the reference vessel of Rotor 16MF100 or Rotor 16HF100. The pressure data is transferred to the oven via infrared signal. If required, the pressure sensor accessory can be upgraded to a pressure/temperature sensor accessory.

Pressure Sensor Accessory

Revetest® Scratch Tester (RST³)

Rheometer: MCR 102, MCR 302, MCR 502

Rheometer: MCR 72 and MCR 92

Rolling-ball viscometer Lovis 2000 M/ME

The RheolabQC is the quality control rheometer from Anton Paar. RheolabQC with temperature device C-PTD 180/AIR/QC and with Flexible Cup Holder.

Rotational Rheometer: RheolabQC

SAXSpace instrument

Routine SAXS/WAXS/BIOSAXS analysis: SAXSpace

SAXS/WAXS/GISAXS laboratory beamline: SAXSpoint 2.0

SVM 2001 Viscometer

SVM 3001 Viscometer

SVM 4001 Viscometer

SmartPave: Dynamic Shear Rheometer

Software for particle analysis: Kalliope™

The Starch Cell in combination with the MCR rheometer enables the easy analysis of starch gelling behavior at the required high heating and cooling rates.

Starch Cell – Starch Pasting Measurement

Top View mounted T-probe with Rotor 8N of Multiwave PRO.

T-probe

TORC 5000 - Thermo-optical Oscillating Refraction Characterization

With its extended low temperature range the automatic Tag closed cup tester can measure flash points or detect flammable vapors by the flash/no flash method.

Tag Flash Point Tester: TAG 4

Ultra Nanoindentation Tester (UNHT³)

Pressure/temperature sensor accessory for precise reaction control within the reference vessel of Rotor 16MF100 and/or Rotor 16HF100.

p/T Sensor Accessory

Showing to of

Anton Paar Applications

Improve Digestion Quality and Save Money – Microwave Digestion rules out Open Digestion

Improve Digestion Quality and Save Money – Microwave Digestion rules out Open Digestion

Reliable elemental analysis results need robust sample preparation to destroy sample matrices or to separate matrix from analytes. The sample preparation step is by far the most error-prone and critical step of the analytical procedure.

High temperature tribological behavior of advanced hard coatings for cutting tools

High temperature tribological behavior of advanced hard coatings for cutting tools

High temperature tribological behavior of advanced hard coatings for cutting tools

Mechanical properties of ultrananocrystalline diamond (UNCD) films with an influence of the nucleation density on the structure

Mechanical properties of ultrananocrystalline diamond (UNCD) films with an influence of the nucleation density on the structure

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)

Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)

The Ultra Nanoindentation Tester: New generation of thermal drift free indentation

The Ultra Nanoindentation Tester: New generation of thermal drift free indentation

Milk: Know the particles, know the quality

Milk: Know the particles, know the quality

The size of the fat particles in milk can vary, which strongly affects milk quality. Characterizing milk-based particles is fast and accurate with the Litesizer™ 500.

Gold nanoparticles: Size matters, and so does stability

Gold nanoparticles: Size matters, and so does stability

Gold nanoparticles are now used in many fields, from medicine to electronics, but each application has specific particle-size and stability requirements. Gold nanoparticles can be easily monitored with the Litesizer™ 500.

Identifying three different particle sizes in one sample with DLS

Identifying three different particle sizes in one sample with DLS

Particle suspensions often contain more than one size of particle. However, many particle analyzers cannot resolve particle mixtures, instead they detect an average of all sizes. The Litesizer™ 500 can detect three sizes in one sample.

SAXSpoint with MetalJet Source

SAXSpoint with MetalJet Source

SAXSpoint now integrates the high-brightness MetalJet X-ray source enabling ultra-fast SAXS measurements in the laboratory.

In-situ GISAXS heating experiments on self-assembled Gold nanoparticles

In-situ GISAXS heating experiments on self-assembled Gold nanoparticles

Thermal morphology changes of self-assembled Gold nanoparticles have been studied using the SAXSpoint system with the temperature controlled GISAXS stage.