External Measuring Cell:
DMA HPM

Density measurement at sample pressures up to 1400 bar and temperatures from -10 °C to 200 °C
Ideal for PVT analysis and enhanced oil recovery (EOR) experiments
Remote data reading via evaluation unit mPDS 5

DMA HPM

Key features
Specifications
Standards
Documents
Complementary products

The External Measuring Cell DMA HPM measures density at sample pressures up to 1400 bar and temperatures from -10 up to 200 °C. Connect an mPDS 5 evaluation unit to control DMA HPM and read out the measurement data. To thermostat DMA HPM use a climatic chamber, an oven or a heating or cooling bath.

Key features

Measure safely at high pressures and high temperatures

No-hassle measurement at high temperatures and/or pressures
Only 2 mL sample required
Locate the mPDS 5 evaluation unit up to 100 m from DMA HPM
Ideal for PVT analysis and enhanced oil recovery (EOR) experiments

Memory for 999 adjustments

Store up to 999 adjustments in mPDS 5
Easy to select between single-point adjustment or wide range adjustment
Use wide range adjustment to measure the sample density over wide temperature and pressure ranges

Specifications

Measuring range
Accuracy
Repeatability s.d.
Digital Resolution
Additional information
Density	0 to 3 g/cm³
Pressure	0 to 1400 bar (0 to 20,300 psi)
Temperature	-10 to +200 °C (14 to 392 °F)
Density	Up to 0.0001 g/cm³
Density	Up to 0.00001 g/cm³
Density	0.00001 g/cm³
Cell material	Hastelloy C-276
Volume of the measuring cell	approx. 2 mL
Dimensions (L x W x H) DMA HPM Interface module	210 x 78 x 86 mm (8.3 x 3.1 x 3.4 inches) 220 x 120 x 80 mm (8.7 x 4.7 x 3.1 inches)
Weight DMA HPM Interface module	8.3 kg (18.3 lbs) 1.5 kg (3.3 lbs)
Connections	Pressure fittings for metal tubes with 1/4" outer diameter