針/錐入度計:
PNR 12
- 使用自動針/錐入度計 測量任何類型的半固體樣品的稠度
- 對高黏度甚至導電性樣品進行可靠的表面偵測
- 透過統計和資料庫功能簡化您的測量工作流程
基於 60 多年的穿透測試經驗,我們的 PNR 12 針/錐入度計可自動測量測試針體在特定時間內浸入樣品的深度。在各種標準化測試頭中進行選擇,例如具有定義之重量和幾何的錐體和針體,以確定穿透深度。在其他應用中,可用來確定瀝青、柏油、油脂、蠟、Vaseline® 和黃油的稠度。
主要功能
自動表面偵測消除了測量誤差
- 使用獲得專利的力學感測器活塞確保高黏性樣品的自動表面偵測,這對於在水下測試的樣品特別有用
- 使用電子感測器自動偵測導電樣品,通常是水性樣品
- 依靠這兩個選項進行方便的穿透測試,具有良好的再現性,任何使用者皆可輕鬆上手

堅固易於使用的針/錐入度計,經久耐用
- 使用於測量時間、距離(穿透深度)和溫度的可選校準套件保持您的針/錐入度計的可靠性和準確性
- 使用滾輪、有用的放大鏡和明亮的 LED 樣品燈簡化您的手動樣品表面處理方法
- 在任何環境下皆能使用堅固的滾輪和操作按鈕,即使戴著手套

正確的針/錐入度計設定,無論您的應用是什麼
- 依靠一系列符合適用標準的配件:
- 瀝青針和活塞符合 ASTM D5 和 EN 1426
- 油脂錐符合 ASTM D217、ASTM D1403 和 ISO 2137
- 製藥錐和針符合歐盟藥典 2.9.9 和 USP 915
- 符合 AOCS Cc 16-60 標準的黃油錐
- 為您的 PNR 12 配備外部認證的測試套件
- 受益於 PQP-S 文件和合規性維護重新認證,這表明服務和支援直接來自製造商

資料管理變得簡單
- 使用 20 個程式配置您的針/錐入度計,其中 16 個程式是使用者可定義的
- 自動將測試結果轉換為 NLGI 等級、EN 瀝青、¼ 錐體到全錐體、½ 錐體到全錐體以及食用脂肪的 C 值
- 在儀器上分析多達 200 個測試結果,並經由 USB 隨身碟或 LIMS 將這些結果轉換為 Excel
- 當測試值超出預設值範圍時,使用限值指示器警報快速採取應對措施

滿足特定需求的可選設備
- 訂購 PNR 12 針/錐入度計連同您設定所需的測試附件,包括:
- 用於樣品回火的循環浴槽和轉移盤
- 用於半刻度和四分之一刻度錐體穿透的手動潤滑脂工作器
- 各種樣品容器和鋼瓶
- 用於輸出測試結果文件的列印機

技術規格
測量範圍 | 0 mm 至 80 mm (取決於連桿) |
---|---|
最大測試重量 | 2 kg |
解析度 | ±0.01 mm |
測試時間 | 0.1 s 至 999,999 s |
啟動延時 | 可達 9999 s |
介面 | USB、LAN、LIMS 相容性 |
電源 | 100 V 到 240 V、50 Hz/60 Hz、1.5 A、70 W |
尺寸 | 300 mm x 380 mm x 570 mm(寬 x 深 x 高) |
重量 | 11 kg |
標準
ASTM
DIN
EN
歐洲藥典 (Ph. Eur.)
ISO
JIS
ABNT
US Pharmacopoeia (USP)
文件
相似產品
補充產品
如果沒有找到您需要的物品,請聯繫您的安東帕銷售代表。

TEST KIT, NEEDLE (AUTOMATIC DETECTION)
Test kit, needle (automatic detection). ASTM D5, EN 1426. The set consists of:
- Bitumen needle, 2.5 g, made of brass / stainless steel (P/N 106912)
- Sensor plunger, 97.5 g, for automatic surface detection (P/N 106905)
- Sample container, d 55 × 35 mm, made of nickel plated brass (P/N 106834)
- Transfer dish with heat exchanger, nickel-plated brass, d 160 x 80 mm (P/N 106838)
- Intermediate bottom (transfer dish) (P/N 106846)
- Thermometer holder (transfer dish) for thermometer up to d 7.5 mm (P/N 106847)
- Pt100 temperature sensor made of metal (P/N 107002)

TEST KIT, KLEIN MICRO CONE (EURO PHARMA)
Test kit, micro cone. Eur. Pharmacopoeia 2.9.9. The set consists of:
- Micro cone, 7 g, made of aluminum, Euro-Pharma (P/N 106877)
- Plunger, 16.8 g, 116 mm, made of aluminum / nickel plated brass (P/N 106878)
- 3 grease sample containers, 3 parts (P/N 106874)
- Centering disk, d 11 or 12.75 mm (P/N 106875)

TEST KIT, SOLID ALUMINUM CONE 40° Test kit, aluminum cone.
The set consists of:
- Special cone, 31.5 g, 40°, made of duralumin, UNILEVER (P/N 106882),
- Plunger, 48.5 g, 135 mm, made of nickel plated brass (P/N 106883),
- Load weight, slotted, 80 g, made of brass (P/N 106884).

TEST KIT, HOLLOW BRASS CONE
Test kit, hollow cone. ASTM D217, ISO 2137. The set consists of:
- Hollow cone, 102.5 g, made of brass with stainless steel tip (P/N 106848)
- Plunger, 47.5 g, 162 mm, made of nickel plated brass (P/N 106822)
- Sample container, d 76 × 63.5 mm, made of nickel plated brass (P/N 106850)
- Option: Centering disk, d 76.5 mm (P/N 106858)

TEST KIT, QUARTER SCALE ACRYLIC CONE
Test kit, quarter scale cone. ASTM D1403, ISO 2137. The set consists of:
- Quarter scale cone, 1.08 g, made of acrylic glass with stainless steel tip (P/N 106862)
- Plunger, 8.3 g, 99 mm, made of elektron / magnesium (P/N 106863)
- Sample container, d 19 x 11 mm, with lid (P/N 106864)

HOLLOW CONE, 15 g, ACRYLIC GLASS/ALUMINUM
Hollow cone, 15 g, made of acrylic glass with aluminum tip

SOLID CONE, 102.5 g, ALUMINUM/STEEL
Standard solid cone, 102.5 g, made of aluminium with steel tip. ASTM D217, ASTM D937, ISO 2137

WAX TEST CYLINDER, d 25.4/27 x H 32 mm
Wax test cilinder, d 25.4/27 × H 32 mm, made of nickel plated brass. DIN 51579, ASTM D1321

PLUNGER, 10g, 107mm ALUMINUM
Plunger, 10g, 107mm, made of aluminium. Application: 15g acrylic glass cone (106860).

PLUNGER, 97.5 g, 154 mm, BRASS NICKEL-PLATED
Plunger, 97.5 g, 154 mm, made of nickel plated brass. General purpose. In particular with:
- tapered and standard needles
- standard cones (in accordance with DIN-ISO-ASTM-IP)

LOAD WEIGHT, BORED, 50 g
Load weight, bored, 50 g, made of brass

LOAD WEIGHT, BORED, 100 g
Load weight, bored, 100 g, made of brass

SAMPLE CONTAINER, d 55 x 35 mm
Sample container, d 55 × 35 mm, made of nickel plated brass. ASTM D5, EN 1426 (<200 PU)

SAMPLE CONTAINER, d 70 x 45 mm
Sample container, d 70 × 45 mm, made of nickel plated brass. ASTM D5, EN 1426 (200-350 PU)

WAX TAPERED NEEDLE, 2.5 g, STANDARD, WITH ID NUMBER
Tapered needle with engraved ID-number. Made of stainless steel. ASTM D1321, DIN 51579

QUARTER SCALE CONE, 1.08 g, ACRYLIC GLASS/STEEL
Quarter scale cone, 1.08 g, made of acrylic glass with steel tip. ASTM D1403, ISO 2137

PLUNGER, 8.3 g, 99 mm, ELEKTRON / MAGNESIUM
Plunger, 8.3 g, 99 mm, made of elektron / magnesium. Application: Quarter-scale cone (106862)

MICRO GREASE WORKER, 1/4 CONE METHOD
Micro grease worker for quarter scale cone method. ASTM D1403, ISO 2137.

HALF SCALE CONE, 22.5 g, BRASS/STEEL
Half scale cone, 22.5 g, made of brass with steel tip. ASTM D1403, ISO 2137.

MICRO GREASE WORKER, 1/2 CONE METHOD
Micro grease worker for half scale cone method. ASTM D1403, ISO 2137.

GREASE CONTAINER, 3-PARTS CPL. WITH INSERT CYLINDER
Grease sample container, 3 parts

MICRO CONE (PHARMA), 7 g, ALUMINUM (KLEIN TYPE)
Micro cone, 7 g, made of aluminum, Euro-Pharma

PLUNGER, 16.8g, 116mm ALUMINUM/NICKEL-PLATED BRASS
Plunger, 16.8 g, 116 mm, made of aluminum / nickel-plated brass. Application: KLEIN microcone (106877).

PERFORATED DISK, 102.5 g, D 70 mm, ALUMINUM
With tip and conical holes.

ELECTRONIC SURFACE-DETECTOR CPL. WITH HOOK AND WIRE
Electronic surface detector, cpl. with hook and wire, for surface detection of inductive samples

MINI SPIRIT LEVEL FOR ADJUSTING THE PNR 12
Mini spirit level for PNR 12

LOAD WEIGHT (SENSOR PLUNGER), 50 g
Load weight for sensor plunger, bored, 50 g, made of brass

LOAD WEIGHT (SENSOR PLUNGER), 100 g
Load weight for sensor plunger, bored, 100 g, made of brass

BITUMEN NEEDLE, 2.5 g, EXTENDED TYPE
Bitumen needle, 2.5 g, made of brass / stainless steel, extended type. ASTM D5, EN 1426 (350-500 PU).

TEMPERATURE SENSOR, SAMPLE PT100, METAL (PNR)
Pt100 temperature sensor made of metal

SAMPLE CONTAINER, d 70 x 60 mm
Sample container, d 70 × 60 mm, made of nickel plated brass. ASTM D5 (200-350 PU), EN 1426 (350-500 PU)

SAMPLE CONTAINER, d 55 x 70 mm
Sample container, d 55 × 70 mm, made of nickel plated brass. ASTM D5 (200-500 PU), EN 1426

SAMPLE CONTAINER, d 55 x 45 mm
Sample container, d 55 × 45 mm, made of nickel plated brass. ASTM D5 (200-350 PU), EN 1426

SAMPLE CONTAINER, d 76 x 63.5 mm
Sample container, d 76 × 63.5 mm, made of nickel plated brass. Fat and greases with the ASTM / DIN standard cones (106848, 106849, 106854, 106859, 106860, 106901, 106902) and perforated disk (106885). Bitumen acc. to ASTM D5 (200-350 PU), EN 1426.

SPECIAL CONE, 31.5g, 40°, DURALUMINUM/ STAINLESS STEEL (UNILEVER TYPE)
Special cone, 31.5 g, 40°, made of duralumin with stainless steel tip, UNILEVER.

PLUNGER, 48.5g, 135mm, NICKEL-PLATED BRASS
Plunger, 48.5 g, 135 mm, made of nickel-plated brass. Application: UNILEVER Margarine Cone (106882).

LOAD WEIGHT, SLOTTED, 80 g
Load weight, slotted, 80 g, made of brass

SENSOR PLUNGER, 47.5 g, PNR 12 AUTOMATIC SURFACE DETECTION
SENSOR PLUNGER, 47.5 g, PNR 12 AUTOMATIC SURFACE DETECTION

SENSOR PLUNGER, 97.5 g, PNR 12 AUTOMATIC SURFACE DETECTION
SENSOR PLUNGER, 97.5 g, PNR 12 AUTOMATIC SURFACE DETECTION

BITUMEN NEEDLE, 2.5 g
BITUMEN NEEDLE, 2.5 g

PLUNGER, 47.5 g, 162 mm, BRASS NICKEL PLATED
Plunger, 47.5 g, 162 mm, made of nickel plated brass. General purpose. In particular with: tapered and standard needles, standard cones (in accordance with DIN-ISO-ASTM-IP)

PLUNGER, 15 g, 118 mm, ALUMINUM
Plunger, 15 g, 118 mm, made of aluminum. Application:
- Micro cone (106872, 106873)
- SHELL half-scale-cone (106868)

HOLLOW CONE, 102.5 g, BRASS/STEEL
Hollow cone, 102.5 g, made of brass with steel tip. ASTM D217, ASTM D937, ISO 2137, DIN 51580