Revetest Scratch Tester:
RST 300
- Coating adhesion, scratch resistance, conventional Vickers hardness
- Full panorama image synchronized with penetration depth, friction force, and acoustic emission
- Automatic Vickers hardness tests
- Force measurement up to 200 N
- Compliant with ASTM C1624, ISO 20502 and ISO EN 1071
The Revetest® scratch tester is the industrial standard widely used for characterizing hard-coated materials with a typical coating thickness exceeding 1 μm. RST 300 is a reliable instrument for the characterization of coating/substrate adhesion, surface scratch resistance, and conventional Vickers hardness. The software enables scratch tests in a wide variety of testing modes, as well as conventional Vickers hardness tests with automatic detection of the imprint. Anton Paar is the world leader in scratch testing with more than 1500 Revetest® instruments sold.
Key features
Patented synchronized panorama mode
This unique feature is exclusive to Anton Paar scratch testers. It automatically synchronizes the recording of all sensor signals with the whole scratch image in perfect focus. This way, the measurement curve can be analyzed exactly parallel to the scratch picture on one page. Anton Paar holds the patents US 12/324, 237, and EP 2065695 for the synchronized panorama mode.
Measurements on curved and uneven surfaces
Due to its unique force sensor control, the Revetest® scratch system detects every surface deviation and the active force feedback corrects it. By following the shape of the sample with total control of the desired load, RST 300 also performs reliable measurements on uneven and curved surfaces.
Unique conventional Vickers hardness capabilities
This unique feature automatically detects and measures the area of the imprint of a conventional Vickers test and eliminates user influence on the Vickers hardness test results. The RST 300 and other Anton Paar scratch testers are the only scratch testers on the market with such advanced capabilities in conventional Vickers hardness testing.
Compliant with ASTM C1624, ISO 20502 and ISO EN 1071
Anton Paar works closely with standardization organizations such as ISO, ASTM, DIN, and others in order to support our customers to meet the high requirements they have for their own products, especially in quality control, where such standards are often essential. By certifying our products accordingly, we can guarantee high-quality products and services in terms of safety, reliability, and sustainability.
High scratch measurement flexibility
Tips of different diameters and angles are available. Indenter holders are also available for applications where the use of small diameter spherical tips, Berkovich or Vickers tips, as well as a 6 mm diameter, is required. One and the same indenter holder can be used for different kinds of tips, and one dedicated ball holder can be used for different ball materials.
Automatic detection of critical loads
Critical load data is used to quantify the adhesive properties of different film-substrate combinations by using different sensors (acoustic emission, penetration depth, friction force) and video microscope observations. With the new software, all critical loads can be detected automatically. The user only needs to set up threshold values and start the automatic analysis of the critical loads (Lc). RST 300 is the only scratch tester on the market with automatic detection of critical loads.
Technical specifications
Normal load | Fine range | Large range |
Max. load [N] | 100 | 200 |
Resolution [mN] | 0.1 | 0.2 |
Noise floor [rms] [μN]* | 1000 | |
Penetration depth | Fine range | Large range |
Max. depth [μm] | 100 | 1000 |
Depth resolution [nm] | 0.05 | 0.5 |
Noise floor [rms] [nm]* | 2.5 | |
Friction load | Large range | |
Max. friction [N] | 200 | |
Friction resolution [mN] | 0.2 |
Acoustic emission sensor
- Central frequency: 150 kHz
- Dynamic range: 65 dBae
- Maximum amplification: 200,000 x
Scratching speed
- From 0.4 mm/min to 600 mm/min
Scratch tables
- Scratch length: up to 70 mm
- Inline scratch inspection: up to 30 mm
- Scratch speed: 0.4 mm/min to 600 mm/min
*Noise floor value specified under ideal laboratory conditions and using an anti-vibration table.
Standards
ASTM
DIN EN
ISO
Anton Paar Certified Service
- More than 350 manufacturer-certified technical experts worldwide
- Qualified support in your local language
- Protection for your investment throughout its lifecycle
- 3-year warranty
Documents
-
Adhesion and hardness of galvanic layers by scratch test and nanoindentation Application Reports
-
Applications of indentation and scratch in automotive industry Application Reports
-
Applications of scratch testing in polymer industry Application Reports
-
Automatic Vickers hardness test by scratch tester Application Reports
-
Biomedical applications 2: Adhesion and scratch resistance by scratch testing Application Reports
-
Characterization of hard coatings - Part I: DLC coatings Application Reports
-
Characterization of the scratch resistance of ceramic tiles: Part I Application Reports
-
Characterization of the scratch resistance of ceramic tiles: Part II Application Reports
-
Electric contact resistance (ECR) by indentation, scratch and tribology Application Reports
-
Scratch resistance of self-healing paints on wood Application Reports
Similar products
Consumables & Accessories
Consumables & Accessories
Accessories
Accessories
If you do not find the item you require, please contact your Anton Paar sales representative.
To find out if you can purchase online from your location, check the online availability below.
VICKERS DIAMOND FOR MCT / RST
KNOOP DIAMOND FOR MXT / RST
SPHEROCONICAL DIAMOND R = 20 µm / 120° FOR MXT / RST ROCKWELL
SPHEROCONICAL DIAMOND R = 50 µm / 120° FOR MCT / RST ROCKWELL
SPHEROCONICAL DIAMOND R = 100 µm / 120° FOR MCT / RST ROCKWELL
SPHEROCONICAL DIAMOND R = 200 µm / 120° FOR MXT / RST ROCKWELL
SPHEROCONICAL DIAMOND R = 10 um / 90° FOR MXT / RST
STEEL 100 CR6 BALLS D= 10mm, 5 PCES
STEEL 440C BALLS D= 6 mm, 20 PCS
STEEL AISI 420 BALL D = 6 mm, 20 PCS
Accessory for Scratch Testers:
Friction Module
- Material’s frictional behavior assessment
- Complementary tool in the assessment of adhesion failures
- Combines scratch and tribology testing
STEEL 100 CR6 BALLS D= 6 mm, 20 PCS