침입도 시험기:
PNR 12
- 자동 침입도 시험기를 이용하여 모든 유형의 반고체 시료 농도를 측정할 수 있습니다.
- 점도가 높고 전도성을 가진 시료의 표면도 안정적으로 파악합니다
- 통계 및 데이터베이스 기능을 이용하여 측정 작업흐름을 간소화하십시오
60년 이상의 침입도 시험 경험을 토대로 한 저희 PNR 12 침입도 시험기는 자동으로 정해진 시간 동안 시험체가 시료로 얼마나 깊이 들어갔는지 측정합니다. 지정된 무게와 기하학적 구조를 가진 원뿔 및 바늘과 같은 다양한 표준 시험체를 선택하여 침입 깊이를 측정할 수 있습니다. 이 장비를 이용하여 역청, 아스팔트, 그리스, 왁스, Vaseline® 및 버터 등의 농도도 측정할 수 있습니다.
주요 특징
자동 표면 감지를 통해 측정 오류를 제거합니다.
- 특허를 획득한 역각 센서 플런저를 이용하여 점도가 높은 시료의 표면을 자동으로 확인할 수 있습니다. 이는 특히 수중에서 시험되는 시료에 유용합니다.
- 전기 센서를 이용하여 일반적으로 수성에 해당하는 전도성을 가진 시료를 자동 감지할 수 있습니다.
- 사용자에 관계 없이 우수한 재현성을 갖춘 두 가지 침입도 시험 옵션을 믿고 사용할 수 있습니다.

오래 쓸 수 있도록 만들어진 견고하고 쉽게 사용할 수 있는 침입도 시험기
- 시간과 거리(침입 깊이) 및 온도를 측정하는 교정 키트 옵션을 이용하여 침입도 시험기의 재현성과 정확도를 유지할 수 있습니다.
- 조그 휠과 유용한 확대경, 밝은 LED 시료 조명을 이용하여 수동 시료 표면 접근 방식을 간소화할 수 있습니다.
- 어떤 환경에서든지, 장갑을 낀 상태로도 견고한 조그 휠과 작동 버튼을 이용할 수 있습니다.

어떤 용도에서나 올바른 침입도 시험기 설정
- 적용 표준을 준수하는 다양한 액세서리를 이용할 수 있습니다.
- 역청 바늘 및 플런저는 ASTM D5와 EN 1426을 준수합니다
- 그리스 콘은 ASTM D217, ASTM D1403, 및 ISO 2137을 준수합니다
- 약학 콘과 바늘은 EU 약전 2.9.9 및 USP 915를 준수합니다.
- 버터 콘은 AOCS Cc 16-60을 준수합니다
- PNR 12에 외부 인증 시험 키트를 장착할 수 있습니다.
- 제조사가 직접 서비스와 지원을 제공함을 증명하는 PQP-S 문서 및 적합성 유지 재인증을 활용할 수 있습니다.

데이터 관리가 쉽습니다
- 사용자가 구성할 수 있는 16가지 프로그램을 포함한 20가지 프로그램으로 침입도 시험기를 구성할 수 있습니다.
- 시험 결과를 자동으로 NLGI 클래스, EN Bitumen, ¼ 콘 대 솔리드 콘, ½ 콘 대 솔리드 콘, 식용 지방의 C 값으로 변환할 수 있습니다.
- 기기에서 최대 200개의 시험 결과를 분석하고 USB 스틱이나 LIMS를 통해 Excel로 변환할 수 있습니다.
- 시험 값이 사전에 설정된 값 범위에서 이탈하면 제한 표시 알람을 이용하여 빠르게 대응 조치를 취할 수 있습니다.

특정 요구 조건에 맞춘 옵션 장비
- 다음과 같이 설정에 필요한 시험 액세서리와 함께 PNR 12 침입도 시험기를 주문할 수 있습니다.
- 시료 항온을 위한 순환조 및 전송 접시
- 하프 스케일 및 쿼터 스케일 콘 침입을 위한 수동 그리스 혼화기
- 다양한 시료 용기 및 실린더
- 시험 결과 문서화를 위한 프린터

사양
측정 범위 | 0mm ~ 80mm(플런저에 따라 다름) |
---|---|
최대 시험 부하 | 2kg |
분해능 | ±0.01mm |
시험 소요 시간 | 0.1초 ~ 999,999초 |
시작 지연 | 최대 9999초 |
인터페이스 | USB, LAN, LIMS 호환성 |
전원 공급 장치 | 100V ~ 240V, 50Hz/60Hz, 1.5A, 70W |
크기 | 300mm x 380mm x 570mm(W x D x H) |
무게 | 11kg |
표준
ASTM
DIN
EN
European Pharmacopoeia (Ph. Eur.)
ISO
JIS
ABNT
US Pharmacopoeia (USP)
Anton Paar 공인 서비스
- 전 세계 350명 이상의 제조업체 인증 기술 전문가
- 현지 언어로 이루어지는 검증된 지원
- 수명 주기 동안 투자 보호
- 3년 보증
문서
유사 제품
보완 제품
필요한 품목을 찾지 못한 경우 Anton Paar 영업 담당자에게 문의하십시오.

TEST KIT, NEEDLE (AUTOMATIC DETECTION)
Test kit, needle (automatic detection). ASTM D5, EN 1426. The set consists of:
- Bitumen needle, 2.5 g, made of brass / stainless steel (P/N 106912)
- Sensor plunger, 97.5 g, for automatic surface detection (P/N 106905)
- Sample container, d 55 × 35 mm, made of nickel plated brass (P/N 106834)
- Transfer dish with heat exchanger, nickel-plated brass, d 160 x 80 mm (P/N 106838)
- Intermediate bottom (transfer dish) (P/N 106846)
- Thermometer holder (transfer dish) for thermometer up to d 7.5 mm (P/N 106847)
- Pt100 temperature sensor made of metal (P/N 107002)

TEST KIT, KLEIN MICRO CONE (EURO PHARMA)
Test kit, micro cone. Eur. Pharmacopoeia 2.9.9. The set consists of:
- Micro cone, 7 g, made of aluminum, Euro-Pharma (P/N 106877)
- Plunger, 16.8 g, 116 mm, made of aluminum / nickel plated brass (P/N 106878)
- 3 grease sample containers, 3 parts (P/N 106874)
- Centering disk, d 11 or 12.75 mm (P/N 106875)

TEST KIT, SOLID ALUMINUM CONE 40° Test kit, aluminum cone.
The set consists of:
- Special cone, 31.5 g, 40°, made of duralumin, UNILEVER (P/N 106882),
- Plunger, 48.5 g, 135 mm, made of nickel plated brass (P/N 106883),
- Load weight, slotted, 80 g, made of brass (P/N 106884).

TEST KIT, HOLLOW BRASS CONE
Test kit, hollow cone. ASTM D217, ISO 2137. The set consists of:
- Hollow cone, 102.5 g, made of brass with stainless steel tip (P/N 106848)
- Plunger, 47.5 g, 162 mm, made of nickel plated brass (P/N 106822)
- Sample container, d 76 × 63.5 mm, made of nickel plated brass (P/N 106850)
- Option: Centering disk, d 76.5 mm (P/N 106858)

TEST KIT, QUARTER SCALE ACRYLIC CONE
Test kit, quarter scale cone. ASTM D1403, ISO 2137. The set consists of:
- Quarter scale cone, 1.08 g, made of acrylic glass with stainless steel tip (P/N 106862)
- Plunger, 8.3 g, 99 mm, made of elektron / magnesium (P/N 106863)
- Sample container, d 19 x 11 mm, with lid (P/N 106864)

HOLLOW CONE, 15 g, ACRYLIC GLASS/ALUMINUM
Hollow cone, 15 g, made of acrylic glass with aluminum tip

SOLID CONE, 102.5 g, ALUMINUM/STEEL
Standard solid cone, 102.5 g, made of aluminium with steel tip. ASTM D217, ASTM D937, ISO 2137

WAX TEST CYLINDER, d 25.4/27 x H 32 mm
Wax test cilinder, d 25.4/27 × H 32 mm, made of nickel plated brass. DIN 51579, ASTM D1321

PLUNGER, 10g, 107mm ALUMINUM
Plunger, 10g, 107mm, made of aluminium. Application: 15g acrylic glass cone (106860).

PLUNGER, 97.5 g, 154 mm, BRASS NICKEL-PLATED
Plunger, 97.5 g, 154 mm, made of nickel plated brass. General purpose. In particular with:
- tapered and standard needles
- standard cones (in accordance with DIN-ISO-ASTM-IP)

LOAD WEIGHT, BORED, 50 g
Load weight, bored, 50 g, made of brass

LOAD WEIGHT, BORED, 100 g
Load weight, bored, 100 g, made of brass

SAMPLE CONTAINER, d 55 x 35 mm
Sample container, d 55 × 35 mm, made of nickel plated brass. ASTM D5, EN 1426 (<200 PU)

SAMPLE CONTAINER, d 70 x 45 mm
Sample container, d 70 × 45 mm, made of nickel plated brass. ASTM D5, EN 1426 (200-350 PU)

WAX TAPERED NEEDLE, 2.5 g, STANDARD, WITH ID NUMBER
Tapered needle with engraved ID-number. Made of stainless steel. ASTM D1321, DIN 51579

QUARTER SCALE CONE, 1.08 g, ACRYLIC GLASS/STEEL
Quarter scale cone, 1.08 g, made of acrylic glass with steel tip. ASTM D1403, ISO 2137

PLUNGER, 8.3 g, 99 mm, ELEKTRON / MAGNESIUM
Plunger, 8.3 g, 99 mm, made of elektron / magnesium. Application: Quarter-scale cone (106862)

MICRO GREASE WORKER, 1/4 CONE METHOD
Micro grease worker for quarter scale cone method. ASTM D1403, ISO 2137.

HALF SCALE CONE, 22.5 g, BRASS/STEEL
Half scale cone, 22.5 g, made of brass with steel tip. ASTM D1403, ISO 2137.

MICRO GREASE WORKER, 1/2 CONE METHOD
Micro grease worker for half scale cone method. ASTM D1403, ISO 2137.

GREASE CONTAINER, 3-PARTS CPL. WITH INSERT CYLINDER
Grease sample container, 3 parts

MICRO CONE (PHARMA), 7 g, ALUMINUM (KLEIN TYPE)
Micro cone, 7 g, made of aluminum, Euro-Pharma

PLUNGER, 16.8g, 116mm ALUMINUM/NICKEL-PLATED BRASS
Plunger, 16.8 g, 116 mm, made of aluminum / nickel-plated brass. Application: KLEIN microcone (106877).

PERFORATED DISK, 102.5 g, D 70 mm, ALUMINUM
With tip and conical holes.

ELECTRONIC SURFACE-DETECTOR CPL. WITH HOOK AND WIRE
Electronic surface detector, cpl. with hook and wire, for surface detection of inductive samples

MINI SPIRIT LEVEL FOR ADJUSTING THE PNR 12
Mini spirit level for PNR 12

LOAD WEIGHT (SENSOR PLUNGER), 50 g
Load weight for sensor plunger, bored, 50 g, made of brass

LOAD WEIGHT (SENSOR PLUNGER), 100 g
Load weight for sensor plunger, bored, 100 g, made of brass

BITUMEN NEEDLE, 2.5 g, EXTENDED TYPE
Bitumen needle, 2.5 g, made of brass / stainless steel, extended type. ASTM D5, EN 1426 (350-500 PU).

TEMPERATURE SENSOR, SAMPLE PT100, METAL (PNR)
Pt100 temperature sensor made of metal

SAMPLE CONTAINER, d 70 x 60 mm
Sample container, d 70 × 60 mm, made of nickel plated brass. ASTM D5 (200-350 PU), EN 1426 (350-500 PU)

SAMPLE CONTAINER, d 55 x 70 mm
Sample container, d 55 × 70 mm, made of nickel plated brass. ASTM D5 (200-500 PU), EN 1426

SAMPLE CONTAINER, d 55 x 45 mm
Sample container, d 55 × 45 mm, made of nickel plated brass. ASTM D5 (200-350 PU), EN 1426

SAMPLE CONTAINER, d 76 x 63.5 mm
Sample container, d 76 × 63.5 mm, made of nickel plated brass. Fat and greases with the ASTM / DIN standard cones (106848, 106849, 106854, 106859, 106860, 106901, 106902) and perforated disk (106885). Bitumen acc. to ASTM D5 (200-350 PU), EN 1426.

SPECIAL CONE, 31.5g, 40°, DURALUMINUM/ STAINLESS STEEL (UNILEVER TYPE)
Special cone, 31.5 g, 40°, made of duralumin with stainless steel tip, UNILEVER.

PLUNGER, 48.5g, 135mm, NICKEL-PLATED BRASS
Plunger, 48.5 g, 135 mm, made of nickel-plated brass. Application: UNILEVER Margarine Cone (106882).

LOAD WEIGHT, SLOTTED, 80 g
Load weight, slotted, 80 g, made of brass

SENSOR PLUNGER, 47.5 g, PNR 12 AUTOMATIC SURFACE DETECTION
Sensor plunger, 47.5 g, for automatic surface detection. Application: Bitumen samples <160 PU (total weight 50-100 g).

SENSOR PLUNGER, 97.5 g, PNR 12 AUTOMATIC SURFACE DETECTION
Sensor plunger, 97.5 g, for automatic surface detection. Application: Bitumen samples <160 PU (total weight 100-200 g).

BITUMEN NEEDLE, 2.5 g
Bitumen needle, 2.5 g, made of brass / stainless steel. ASTM D5, EN 1426 and other applications.

PLUNGER, 47.5 g, 162 mm, BRASS NICKEL PLATED
Plunger, 47.5 g, 162 mm, made of nickel plated brass. General purpose. In particular with: tapered and standard needles, standard cones (in accordance with DIN-ISO-ASTM-IP)

PLUNGER, 15 g, 118 mm, ALUMINUM
Plunger, 15 g, 118 mm, made of aluminum. Application:
- Micro cone (106872, 106873)
- SHELL half-scale-cone (106868)

HOLLOW CONE, 102.5 g, BRASS/STEEL
Hollow cone, 102.5 g, made of brass with steel tip. ASTM D217, ASTM D937, ISO 2137, DIN 51580