Inks, Toners

Inchiostri, Toners

Le prestazioni di un inchiostro o di un toner sono immediatamente visibili ad occhio nudo. Esiste tuttavia una serie di aspetti meno visibili legati a un'ampia gamma di parametri, quali la viscosità, la tensione superficiale, il tempo di essiccamento, l'opacità e la gravità specifica. In questo senso si rivelano vantaggiose soluzioni di misura complete e personalizzabili in base alle esigenze specifiche. Cercate lo strumento di misura che meglio risponde alle vostre esigenze nella lista riportata sotto oppure contattateci direttamente.

Contatti

Anton Paar Prodotti

La tua selezione: Reimposta tutti i filtri X
Tipo di operazione
Standard
Gruppo di prodotti
Tipo di dispositivo
Mostra a di

Non è stato trovato nessun risultato!

Analizzatore area superficiale: AutoFlow BET+

Analizzatore delle dimensioni delle particelle: Litesizer

Analizzatore di adsorbimento di gas: QUADRASORB evo

Analizzatore di adsorbimento/desorbimento volumetrico di gas ad adsorbimento/desorbimento di vapore: VSTAR

Analizzatore porimetri a intrusione di mercurio: PoreMaster

Analizzatori area superficiale e dimensioni dei pori: NOVAtouch

Analizzatori automatici di densità apparente: Autotap

Analizzatori di fisisorbimento/chemisorbimento ad alto vuoto: autosorb iQ

Campionatore automatico rappresentativo: Micro Rotary Riffler

Degassatore in fluido e in vuoto: FloVac

Degassatore in vuoto: XeriPrep

Densimetro palmare: DMA 35 Basic

Densimetro portatile: DMA 35

HTR Compact: reometro campionatore automatico per un'elevata produttività di campionamento

HTR: reometro automatizzato per la massima produttività e la gestione complessa di campioni

Micro Combi Tester: MCT³

Mulino a sfere: BM500

Nano Scratch Tester: NST³

Nanoindentation tester: NHT³

Piattaforma di reazione a microonde: Multiwave 5000

Picnometri a gas a stazione singola per densità reale: Ultrapyc

Pinometri a gas a cinque stazioni per la densità reale: PentaPyc e PentaFoam

Reattore a microonde: Monowave

Reometro modulare compatto: MCR 72/92

Reometro modulare compatto: MCR 102e/302e/502e

The RheolabQC is the quality control rheometer from Anton Paar. RheolabQC with temperature device C-PTD 180/AIR/QC and with Flexible Cup Holder.

Reometro rotazionale: RheolabQC

Rifrattometro compatto digitale: Abbemat

Abbemat Performance e Performance Plus

Rifrattometro digitale linea performance: Abbemat

Scambiatore di campioni riscaldati: Xsample 630 H

Scratch Tester Revetest®: RST³

Sistema di digestione a microonde: Multiwave 7000

Sistema di digestione a microonde: Multiwave GO Plus

Soluzioni da laboratorio totalmente customizzabili: HTX

Testa di misura per reometro a taglio dinamico: DSR 502

High Temperature Vacuum Tribometer

Tribometro per vuoto: TRB V / THT V

Tribometro pin-on-disk: TRB³

Ultra Nanoindentation Tester: UNHT³

Viscosimetro a caduta di sfera: Lovis 2000 M/ME

Viscosimetro rotazionale: ViscoQC

Mostra a di

Quantachrome Prodotti

Anton Paar Applicazioni

Concentration Measurement of Sodium Hydroxide Solutions by Refractive Index

Concentration Measurement of Sodium Hydroxide Solutions by Refractive Index

The concentration of sodium hydroxide in water can be easily and quickly determined by refractive index measurement.

Improve Digestion Quality and Save Money – Microwave Digestion rules out Open Digestion

Improve Digestion Quality and Save Money – Microwave Digestion rules out Open Digestion

Reliable elemental analysis results need robust sample preparation to destroy sample matrices or to separate matrix from analytes. The sample preparation step is by far the most error-prone and critical step of the analytical procedure.

Refractive Index Measurement of Ionic Liquids

Refractive Index Measurement of Ionic Liquids

Ionic liquids are special designer solvents as they are nonvolatile and liquid at ambient temperature, leading to a wide range of applications. Their refractive index helps to control the quality and also to characterize them.

Have a Good Trip

Have a Good Trip

Refractometers are widely used in the automotive industry, e.g. to control the quality of oils, chemical liquids and solids such as plastics and glasses.

Nanoindentation and Nanoscratch of Oxide Coatings on Thin Film Polymer Substrates

Nanoindentation and Nanoscratch of Oxide Coatings on Thin Film Polymer Substrates

Nanoindentation approach to mechanical testing of extremely soft materials

Nanoindentation approach to mechanical testing of extremely soft materials

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)

Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)

The Ultra Nanoindentation Tester: New generation of thermal drift free indentation

The Ultra Nanoindentation Tester: New generation of thermal drift free indentation

Identifying three different particle sizes in one sample with DLS

Identifying three different particle sizes in one sample with DLS

Particle suspensions often contain more than one size of particle. However, many particle analyzers cannot resolve particle mixtures, instead they detect an average of all sizes. The Litesizer™ 500 can detect three sizes in one sample.

Nanoparticles for Ceramics: Size, Stability & pH

Nanoparticles for Ceramics: Size, Stability & pH

In nanoparticle suspensions that will be used in ceramics, particle size and stability are of vital importance. Suspension stability is essential to ensure that the particles to stay in suspension, and maintain constant particle size.

Temperature-dependent GISAXS studies on thin films

Temperature-dependent GISAXS studies on thin films

The temperature-induced decomposition of a thin film structure has been studied using the SAXSpoint system with the new temperature-controlled GISAXS stage.

An insight into the Structure of Copolymer Surfactants

An insight into the Structure of Copolymer Surfactants

The structure of inhomogeneous (core-shell) nanoparticles was studied with the SAXSpoint system. The internal structure of Pluronic P123 micelles in water was determined by calculating the radial electron density profile.

SAXSpoint with MetalJet Source

SAXSpoint with MetalJet Source

SAXSpoint now integrates the high-brightness MetalJet X-ray source enabling ultra-fast SAXS measurements in the laboratory.

In-situ GISAXS heating experiments on self-assembled Gold nanoparticles

In-situ GISAXS heating experiments on self-assembled Gold nanoparticles

Thermal morphology changes of self-assembled Gold nanoparticles have been studied using the SAXSpoint system with the temperature controlled GISAXS stage.

Webinar

Vi offriamo una selezione sempre più ampia di live webinar e registrazioni su prodotti, applicazioni e argomenti scientifici.

Visualizza i webinar