Camera a bassa temperatura:
TTK 600
La Camera a bassa temperatura TTK 600 è un accessorio non ambientale per studi di polveri in diffrazione di raggi X da -190°C a 600°C. Supporti portacampione diversi consentono di studiare campioni in geometria riflessione e trasmissione. I campioni possono essere misurati nel vuoto, in aria o in gas inerti. Un'anticamera opzionale consente il trasferimento sicuro di campioni sensibili all'aria nel TTK 600.
TTK 600 si adatta a tutti i comuni difrattometri per polveri ed è lo strumento preferito per l'analisi a bassa e media temperatura della struttura con raggi X di vari tipi di campioni.
Specifiche
Temperatura di esercizio | da -190 °C a 600 °C con raffreddamento con azoto liquido da -10 °C a 600 °C con raffreddamento ad aria compressa |
---|---|
Misura della temperatura | Pt 100 |
Atmosfera | Sotto vuoto (10-2 mbar), aria, gas inerte |
Angolo di incidenza (2Θ) | da 0 a 164 ° (supporto portacampione standard) |
Pressione operativa massima | 2 bar sopra la pressione atmosferica |
Materiale del portacampioni | Rame cromato |
Dimensione del campione | 14 x 10 mm |
Servizio certificato Anton Paar
- oltre 350 esperti tecnici certificati direttamente dal produttore a livello globale Assistenza qualificata nella tua linguaProtezione del vostro investimento per l'intero ciclo di vita3 anni di garanzia
Documenti
-
Antechamber for TTK 600 Brochure
-
Battery Sample Holder for TTK 600 Brochure
-
TTK 600 Low Temperature Chamber Brochure
-
E-Book - Praxisleitfaden zur Pulvercharakterisierung für Pharmazeutika Report applicativi
-
Ice Formation Mechanisms of Aqueous Sucrose Solutions Report applicativi
-
Operando X-ray Diffraction on LCO Batteries Under Non-ambient Conditions Report applicativi
Strumenti compatibili
Prodotti complementari
Se non trovi l'articolo richiesto, contatta il tuo rappresentante di vendita Anton Paar.

VACUUM GREASE 20 g
Grease to lubricate the O-rings.

SET OF GRAPHITE FOILS FOR TTK 600
Set of 10 pcs. of graphite foils for heat transfer between heater and sample holder of TTK 600.

SET OF KAPTON FOILS FOR TTK 600 (5 pcs.)
5 pcs of Kapton window foils (50 μm) for TTK 600.

SET OF O-RINGS FOR TTK600
Set of replacement O-Rings for TTK 600.

SPARE PARTS PACKAGE TTK 600
Including:
- 1 pc. 164866 Set of O-Rings
- 1 pc. 70175 Vacuum grease (20 g)
- 1 pc. 164865 Set of Kapton foils (5 pcs)
- 1 pc. 164864 Set of Graphite foils (10 pcs)

SET OF FOILS FOR HEATING ENVIRONMENT FOR STANDARD SAMPLE HOLDER
The set contains 5 pcs. of Graphite and Nickel foils each for the use in combination with the standard sample holder heating environment.

SET OF FOILS FOR CAPILLARY SAMPLE HOLDER
The set contains each 3 pcs. of Kapton, Nickel and Graphite foils for the use in combination with the capillary sample holder.

SET OF FOILS FOR TRANSMISSION SAMPLE HOLDER
The set contains each 10 pcs. of Kapton and Graphite foils and 2 pcs. of Nickel foils for the use in combination with the transmission sample holder.

STANDARD SAMPLE HOLDER TTK 600 WITH Pt100 (0.8 mm DEPTH)
Spare sample holder with cavity of 0.8 mm and integrated Pt100 RTD.

STANDARD SAMPLE HOLDER TTK 600 WITH Pt100 (FLAT)
Spare sample holder with integrated Pt100 RTD without cavity.

STANDARD SAMPLE HOLDER TTK 600 WITH Pt100 (0.2 mm DEPTH)
Spare sample holder with a cavity of 0.2 mm depth and integrated Pt100 RTD.