Domed Cooling Stage for Four-Circle Goniometers:
DCS 500
- For in-situ X-ray diffraction studies at low and high temperatures on four-circle goniometers and XYZ stages
- Temperature range from -180 °C to +500 °C
- For the investigation of layered structures, phase transformations, and stress in crystalline material
The DCS 500 Domed Cooling Stage is the smallest attachment for in-situ X-ray diffraction studies at low and high temperatures on four-circle goniometers and XYZ stages. With a temperature range from -180 °C to +500 °C and a theta angle from almost 0° to 90° 2Θ for all Φangles, DCS 500 is the ideal sample stage for in-situ studies of layered structures and for investigating phase transformations and stress in crystalline material.
Key features
Exact sample temperature and variable sample environment
- Liquid nitrogen cryostat for fast cooling down to -180 °C
- Resistance heater for fast heating up to +500 °C
- Accurate PT100 RTD close to the sample for precise temperature measurement and control
- Highly X-ray transparent graphite dome for measurements under vacuum, in air and other gases
Compact design
- Smart and variable sample fixing allows reflectivity measurements
- Low weight (850 g)
- Thin, vacuum-insulated liquid nitrogen hoses with high flexibility down to -180 °C
Technical specifications
| Operating temperature in air, inert gas | 25 °C to 500 °C |
|---|---|
| In vacuum (< 5x10-1 mbar) | -180 °C to 500 °C |
| Temperature measurement | PT100 |
| Atmospheres | Vacuum (10-1 mbar), air, inert gas |
| Max. operating pressure | 0.3 bar above atmospheric pressure |
| Sample holder material | Nickel-plated copper alloy |
| Sample diameter | max. 25 mm |
| Dome material | Graphite |
| Transmission | Cu Kα 72 % |
| Measuring geometry | Reflection |
Anton Paar Certified Service
- More than 350 manufacturer-certified technical experts worldwide
- Qualified support in your local language
- Protection for your investment throughout its lifecycle
- 3-year warranty
Documents
-
Residual Stresses in Temperature-cycled Al Thin film on Si(100) Application Reports
-
DCS 500 Domed Cooling Stage Brochures
Consumables
Consumables
If you do not find the item you require, please contact your Anton Paar sales representative.
To find out if you can purchase online from your location, check the online availability below.
PEEK DOME DHS
GRAPHITE DOME DHS
SET OF SPRINGS FOR LARGE SAMPLES FOR DCS 500
SET OF SPRINGS FOR SMALL SAMPLES FOR DCS 500
SPARE PARTS PACKAGE DCS 500
SET OF POWDER SAMPLE CARRIERS DCS 500 (3 Pcs.)
SET OF SPRINGS FOR POWDER SAMPLE CARRIER DCS 500 (12 Pcs.)
Going beyond, with the HTK 1500 High-Temperature Chamber
Learn more
