Cone-Plate Measuring System with Integrated Peltier Temperature Device:
PTD 100 Cone-Plate
-
-
-
- +1
- For small sample volumes from 0.5 mL to 2 mL
- Upgrades ViscoQC 100 and 300 to a cone-plate viscometer
- Two in one: Cone-plate and Peltier temperature device combined
- Automated gap setting process
- Magnetic coupling, Toolmaster™ feature, and temperature probe as standard
Premium configuration for cone-plate measurement with error-eliminating, time-saving features: PTD 100 Cone-Plate is an accessory for ViscoQC 100 and 300 that transforms your standard rotational viscometer into a cone-plate viscometer to determine the absolute viscosity of fluids with small sample volumes down to 0.5 mL. The built-in Peltier temperature device offers a wide, precise temperature range from 0 °C to 100 °C and is fully controlled via the ViscoQC display. Magnetic coupling, in combination with the unique ToolmasterTM feature, saves operators up to 25 seconds per measurement and eliminates errors. And the fully automated gap setting is unique for instruments in this price class.
Key features
Upgrade to a cone-plate viscometer anytime
- Upgrade your ViscoQC 100/300 with Anton Paar’s PTD 100 Cone-Plate accessory anytime, anywhere, in less than a minute
- Use your existing ViscoQC and upgrade with the PTD 100 Cone-Plate accessory when a cone-plate setup is required; easily remove the accessory when a measurement with typical L/RH spindles is required
- Expand ViscoQC’s testing capabilities with minimal investment. Save costs with ViscoQC’s cone-plate accessory, as no extra viscometer is required
Full traceability
- Fully automated electronic gap setting eliminates manual handling and frees up operator, while Continuous monitoring of the correctly set gap prevents inaccurate measurements
- Spindles (made of stainless steel AISI 316L) with magnetic coupling and ToolmasterTM as standard save you up to 25 seconds per measurement and eliminate operator errors since spindles are automatically detected by Toolmaster™
- Perfect alignment of the PTD 100 Cone-Plate via built-in digital leveling of ViscoQC. Continuous monitoring of the alignment status: no more faulty measurements
Full Peltier temperature control
- Small footprint: no additional space on your lab bench
- No bath and thermostat fluid required: less maintenance
- Embedded temperature probe (Pt100) reliably monitors sample temperature, improves repeatability, and thereby saves costs
- Conveniently control both temperature and test via the ViscoQC user interface
- What you set is what you get: No need for artificial temperature inflation to compensate for temperature loss from recirculation thermostat to sample
- Sensor-ready signals when sample has reached set temperature
Technical specifications
| Technical specifications | ||||||||
| ViscoQC 100 | ViscoQC 300 | |||||||
| Torque model | L | R | H | L | R | H | ||
| Viscosity measurement | Single-point | Multi-point | ||||||
| Speed [rpm] | 0.1 rpm to 200 rpm | 0.01 rpm to 250 rpm | ||||||
| Accuracy | ±1.0 % of full-scale range | |||||||
| Repeatability | ±0.2 % | |||||||
| Temperature range [°C] | 0 °C to 100 °C | |||||||
| Measuring systems | Cone-Plate: CP40, CP41, CP42, CP51, CP52 | |||||||
| Spindle | Volume [mL] | Shear ratea [s-1] | Viscosity range [mPa.s or cP] | |||||
| CP40 | 0.5 mL | 7.50 * N | 0.2 to 3 K | 1.6 to 33.1 K | 13.2 to 264.8 K | 0.1 to 31 K | 1.3 to 331 K | 10.6 to 2.6 M |
| CP41 | 2.0 mL | 2.00 * N | 0.6 to 11.6 K | 6.2 to 123.9 K | 50 to 991.1 K | 0.5 to 116.1 K | 5 to 1.2 M | 40 to 9.9 M |
| CP42 | 1.0 mL | 3.84 * N | 0.3 to 6 K | 3.2 to 64.7 K | 26 to 517.6 K | 0.2 to 60.6 K | 2.6 to 647 K | 21 to 5.1 M |
| CP51 | 0.5 mL | 3.84 * N | 2.4 to 48.5 K | 26 to 517.7 K | 207 to 4.1 M | 1.9 to 485.2 K | 21 to 5.1 M | 166 to 41.4 M |
| CP52 | 0.5 mL | 2.00 * N | 4.6 to 92.8 K | 50 to 991.1 K | 396 to 7.9 M | 3.7 to 928.9 K | 40 to 9.9 M | 317 to 79.2 M |
a Example shear rate calculation for CP40: 7.50 x 10 rpm = 75.0 s-1
K = thousand, M = million, N = rpm
Standards
ASTM
DIN
ISO
Anton Paar Certified Service
- More than 350 manufacturer-certified technical experts worldwide
- Qualified support in your local language
- Protection for your investment throughout its lifecycle
- 3-year warranty
Documents
Compatible instruments
Consumables
Consumables
If you do not find the item you require, please contact your Anton Paar sales representative.
To find out if you can purchase online from your location, check the online availability below.
VISCOSITY STANDARD ANTON PAAR N26 (C) 100 ml - 50 / 21 / 4.2 mPa.s
Recommended for DIN/SSA/UL spindles
VISCOSITY STANDARD ANTON PAAR N415 (H) 100 ml - 1100 / 330 / 32 mPa.sc
Recommended for DIN/SSA/UL spindles
VISCOSITY STANDARD ANTON PAAR N26 (C) 500 ml - 50 / 21 / 4.2 mPa.s
VISCOSITY STANDARD ANTON PAAR N415 (H) 500 ml - 1100 / 330 / 32 mPa.s
VISCOSITY STANDARD ANTON PAAR N75 500 ml - 164 / 61 / 8.8 mPa.s
VISCOSITY STANDARD ANTON PAAR N4000 500 ml - 16000 / 2900 / 100 mPa.s
