High-Temperature Strip Heater Chambers:
HTK 16N | HTK 2000N
The HTK 16N and HTK 2000N high temperature chambers are well-proven instruments for in-situ X-ray diffraction studies up to 1600 °C and 2300 °C, respectively. The sample is directly heated with a heating filament. The design of HTK 16N and HTK 2000N allows you to work at high temperatures in different atmospheres. The instruments are made of high-quality materials which guarantee a long working life.
Key features
Minimized sample displacement during heating
- High position stability of the heating filament over the whole temperature range
- Precise linear stage which compensates for thermal elongation of the heating filament
- Integrated alignment slits for sample repositioning even at high temperatures
Accurate sample temperature
- Optimized design for a minimum temperature gradient across the sample
- Two thermocouples for controlling and measuring the sample temperature
Clever design
- Superior design and use of high-grade materials
- Variety of filament materials: platinum, tungsten, tantalum, graphite, and others on request
- Unique graphite heating filament with detachable inert sample carrier plate
- Simple handling and quick sample exchange
Technical specifications
Operating temperature | |
---|---|
Tungsten heating filament for vacuum (≤2.10-4 mbar) | 25 °C to 2300 °C (HTK 2000N) |
Platinum heating filament (vacuum, air, inert gas) | 25 °C to 1600 °C (HTK 16N / HTK 2000N) |
Graphite heating filament for vacuum (≤2.10-4 mbar) | 25 °C to 1500 °C (HTK 16N) |
Nitrogen | 1400 °C (HTK 16N) |
Helium | 1300 °C (HTK 16N) |
Temperature measurement | |
For Pt filaments | Pt 10% RhPt thermocouple |
For W filaments | W 3% Re-W 25% Re thermocouple |
For C filaments | Pt 10% RhPt thermocouple |
Atmospheres | Vacuum (10-4mbar), air, intert gas |
Max. operating pressure | 0.5 bar above atmospheric pressure |
Angle of incidence | 4 to 164° 2Θ |
Measure geometry | Reflection |
Anton Paar Certified Service
- More than 350 manufacturer-certified technical experts worldwide
- Qualified support in your local language
- Protection for your investment throughout its lifecycle
- 3-year warranty
Documents
-
In-situ High-temperature Crystallization of a Lithium Disilicate Glass Application Reports
Compatible instruments
Consumables
Consumables
If you do not find the item you require, please contact your Anton Paar sales representative.
To find out if you can purchase online from your location, check the online availability below.
NON-AMBIENT GUIDE
NEEDLE FOR Xsample 530 TYPE 3
HEATING STRIP TANTALUM 102x10x1 mm
HEATING STRIP TUNGSTEN 102x9x0.5 mm