Sugar Inversion Analyzing System:
Soft Drink Analyzer M
- Measures sugar inversion to ensure correct production limits
- Determines °Brix fresh/actual/inverted plus degree of inversion
- No manual, forced inversion required
- Upgradable with %Diet measuring module and sample changer
- Combination with CO2 meter allows for QC out of final package
For products that use sucrose as a sweetener, Soft Drink Analyzer M determines the sugar inversion process digitally in just 3 to 5 minutes and without the need for forced inversion. It uses a unique combination of density and sound velocity technology in one system and is the ideal instrument for measuring sugar content in soft drinks, syrups, and HFCS. Combine Soft Drink Analyzer M with a sample changer (and optionally with a %Diet measuring module) for measuring syrups and degassed samples, or use it in a multiparameter system for QC out of the final package.
Key features
Measure sugar solutions in any state with one instrument
Soft Drink Analyzer M determines the concentration of fresh, actual, and inverted sugar as well as the degree of inversion in syrups and finished regular soft drinks. This means you can omit forced inversions – one step less in your workflow. Soft Drink Analyzer M derives the concentration from density and sound velocity results. Both results are measured from one sample in one go. The automated detection and compensation of a sample’s viscosity lead to highly accurate results (also for viscous syrup samples). The sound velocity cell withstands pressures up to 8 bar, so that you can analyze all samples, from syrups up to carbonated drinks, with one instrument.
The most accurate density and sound velocity results you can get
New technology, such as the patented Pulsed Excitation Method and intelligent features, deliver the best results on the market, so you can detect even the smallest deviations in your continuous production and react quickly to minimize downtimes.
- Accuracy up to the 6th digit
- Repeatability: 0.000001 g/cm³ (density), 0.1 m/s (sound velocity)
If the filling is incorrect, FillingCheck™ generates and records filling warnings for both the density and the sound velocity cells. In addition, ThermoBalance™ temperature management eliminates drifts caused by temperature stress (requires only one adjustment at one temperature).
Traceable documentation of results
The sensitive yet robust 10.4” PCAP touchscreen, an optional keyboard, and a barcode reader simplify your data management. Additionally, you can print out your measurement reports in a standardized layout or transfer measurement data to your individual data system to make each sample traceable as required by your standards.
Measure sugar inversion, %Diet and CO2 with one system (PBA-SID)
The Packaged Beverage Analyzer M for soft drinks performs quality control out of the final package without sample preparation. No matter which type of soft drink has to be analyzed, the system with its master instrument Soft Drink Analyzer M, determines the °Brix value, the sugar inversion process, and the dissolved CO2 content using only 150 mL of sample. To modify your system for diet beverage analysis, the DietQC ME with the option for uncolored drinks is the solution. Choose modules for dissolved oxygen, pH, or turbidity to complete your system for final beverage analysis. Within three to five minutes, you’ll know about the quality of your final product.
Automated analysis of diet syrups and degassed beverages
For automated analysis of diluted diet syrups and degassed final beverages, combine Soft Drink Analyzer M with automatic sample changers, such as Xsample 320 (automated filling of a single sample), Xsample 330 (additionally performing an automatic cleaning), or Xsample 520 (which automates filling and/or cleaning of up to 24 samples in a row). Combine the master instrument with Anton Paar’s DietQC diet module (to also measure uncolored diet drinks) or a module for pH determination. An optional barcode reader added to Soft Drink Analyzer M automatically identifies each sample name, making every measurement traceable for your documentation.
Technical specifications
Soft Drink Analyzer M | Diet Beverage Analyzing System | PBA-SID Packaged Beverage Analyzer for Soft Drinks with Inversion and Diet Drinks | |
Patents granted | AT 516420 (B1), AT 517082 (B1), AT 517486 (B1) | ||
Measuring range | |||
Density | 0 g/cm³ to 3 g/cm³ | ||
Sound velocity | 1000 m/s to 2000 m/s | ||
Measuring temperature | 20 °C (68 °F)[1] | ||
Current/fresh/inverted sugar concentration | 0 °Brix to 80 °Brix | 0 °Brix to 15 °Brix | |
Degree of inversion | 0 % to 100 % | ||
CO2 | - | - | 0 vol. to 6 vol. (0 g/L to 12 g/L) at 30 °C (86 °F) 0 vol. to 10 vol. (0 g/L to 20 g/L) <15 °C (59 °F) |
O2 | 0 ppm to 4 ppm | ||
%Diet concentration | - | 0–200 % Diet or 0–200 mL NaOH or 0–200 g/L TA or 10–10,000 ppm Alkalinity or 0–600 mg/100 mL H3PO4 | |
pH | - | pH 0 to pH 14 | |
Accuracy[2] | |||
Density | 0.000007 g/cm³ | ||
Temperature | 0.01 °C (0.02 °F) | ||
Repeatability s.d.[3] | |||
Density | 0.000001 g/cm³ | ||
Sound velocity | 0.1 m/s | ||
Temperature | 0.001 °C (0.002 °F) | ||
Current sugar concentration | 0.01 °Brix | ||
Fresh/inverted sugar concentration | 0.02 °Brix | ||
Degree of inversion | 1% | ||
CO2 | - | - | 0.005 vol. (0.01 g/L) |
O2 | - | - | 2 ppb (in the range <200 ppb) |
%Diet concentration | - | Colored diet drinks: 0.2 % Uncolored diet drinks (UV): 0.4 % Uncolored or turbid diet drinks (density): 0.4 % | |
pH | - | 0.02 (in the range pH 3 to pH 7) | |
Reproducibility s.d.[3] | |||
Density | 0.000005 g/cm³ | ||
Sound velocity | 0.5 m/s | ||
General specifications | |||
Minimum sample amount | 20 mL of degassed soft drink 40 mL of syrup | 30 mL | 120 mL to 150 mL |
Measuring time per sample | 3 - 5 minutes (including filling time) | ||
Dimensions (L x W x H) | 495 mm x 330 mm x 230 mm (19.5 in x 13 in x 9.1 in) | 495 mm x 710 mm x 360 mm (19.5 in x 28 in x 14.2 in) | 495 mm x 700 mm x 670 mm (19.5 in x 27.6 in x 26.4 in) |
Data memory | 1000 measuring values (optional ring memory) | ||
Interfaces | 4 x USB, RS-232, CAN, VGA, Ethernet | ||
Display | Bright 10.4" TFT PCAP touchscreen (640 px x 480 px) with customizable display layout | ||
Ambient temperature | 15 °C to 35 °C (59 °F to 95 °F) | ||
Air humidity | 10 % to 90 % relative humidity, non-condensing |
[1] Sample temperature: 15 °C to 25 °C (59 °F to 77 °F)
[2] under ideal conditions and for low densities/viscosities
[3] according to ISO 5725
Anton Paar Certified Service
- More than 350 manufacturer-certified technical experts worldwide
- Qualified support in your local language
- Protection for your investment throughout its lifecycle
- 3-year warranty
Documents
-
Analysis of soft drinks containing sugar and stevia Application Reports
-
Beverage / Soft Drinks | The impact of sugar inversion on soft drinks with sugar Application Reports
-
Beverage | Soft Drinks | Complete Your Soft Drink Analysis Application Reports
-
From measuring results to concentration – using and creating quantities Application Reports
-
Brochure | Good density measurement Brochures
-
Brochure | Soft drink analysis overview Brochures
-
Success story | Bengal Beverages India Customer Success Stories
-
Soft Drink Analyzer M | SOP Manuals
Similar products
Consumables, Accessories & Reference materials
Consumables, Accessories & Reference materials
Accessories
Accessories
If you do not find the item you require, please contact your Anton Paar sales representative.
To find out if you can purchase online from your location, check the online availability below.
CONNECTION TUBE PTFE
CARDBOX PRINTED BC37 0201 585x535x310
PROTECTION FOILS FOR TOUCH-SCREEN (3 PCS)
PROTECTIVE COVER FRONT (3 PCS) FOR 6.4" DISPLAY
CONNECTION TUBE DSA COMPLETE
INJECTION ADAPTER SOUND UNF ¼"
INJECTION ADAPTER FITTING SOUND
DMA M 10.4" INTERFACE CAPS
ADAPTER WITH METAL TUBE BLACK
CONNECTION TUBE DSA M SCU
"HOSE 300x3x2 PTFE ""AA"""
SYRINGES 10 ml LUER (100 pcs.)
VIAL 50 mL POLYSTYRENE (50 Pcs.)
SET OF CAPS SILICONE (30 pcs.)
FILTER WITH SIEVE
HOSE 3x5 SILICONE
HOSE 2x4 SILICONE
HOSE 4X6 SILICONE
PRINTER PAPER 57x30 STANDARD
ADAPTER LUER CONE
PRINTER CONNECTION CABLE
ADAPTER LUER 1/4" UNF
ADAPTER UNF 1/4"-LUER MALE
HOSE 1.6x3.2 TYGON
TUBE d=2.1 D=2.4 L=20 1.4571
PRINTER PAPER FOR EPSON TM-U220
RIBBON CARTRIDGE FOR EPSON PRINTER TM-U220
INJECTION ADAPTER UNF 1/4"
INJECTION ADAPTER FITTING WITH METAL TUBE
HOSE 1x2 SILICONE
ADAPTER LUER TO TYGON TUBE
HOSE CLAMP DMIN 5.8 DMAX 6.5
MALE LUER PLUG
HOSE 140x3x2 PTFE 2x1/4"-28 UNF
PRINTER CONNECTION CABLE
ADAPTER WITH CLAMP
Sample Changer:
Xsample 520
- The multi-sample changer that provides first-class filling at a snap
- Handles up to 96 samples in one magazine
- Ideal for beer, wine, soft drinks, syrups, and other aqueous samples which can be replaced without intermediate cleaning
- Multiple fillings from the same vial if required
Sample Changer:
Xsample 320
- The single sample changer for easy operation
- Multiple fillings from the same vial if required
- Highly resistant wetted parts for handling of aggressive samples
- Quick replacement of the sample without intermediate cleaning
DRYING CARTRIDGE
KEYBOARD USA USB
KEYBOARD GERMAN USB
PRINTER EPSON TM-U220D or B
PROTECTING COVER FOR KEYBOARD
RIBBON CARTRIDGE FOR CITIZEN PRINTER CBM910 / IDP3110
DENSITY STANDARD ULTRA PURE WATER 5x10ml WITH WORKS CERTIFICATE