Recommended Results

Determination of Sample Temperature Using a Temperature Sensor Integrated in a Measuring System in SMT and Counter-Movement Modes

This report shows the construction and advantages of lower measuring systems with integrated temperature sensors for Modular Compact Rheometers (MCR) from Anton Paar with an additional lower drive.

1 Introduction

Temperature determination is of fundamental importance for rheological characterization, since minimal temperature deviations can have significant influence on the rheological properties of the examined sample. When working with a Convection Temperature Device (CTD) and a double-motor MCR, the temperature is typically measured with an external Pt100, which is not located directly at the measuring gap.

Get the document

To receive this document please enter your email below.

Loading...

Error