Introduction to Dynamic Mechanical Analysis of Polymers

Description:

Dynamic mechanical analysis (DMA) is a well-established technique for characterizing mechanical properties of all kinds of materials, particularly polymers or polymer-based products such as thermoplastics, thermosets, elastomers, adhesives, paints and coatings, films and fibers, as well as composites.

In this webinar you will learn how DMA can be used to gain a better understanding of the viscoelastic and thermal properties of your material. The theoretical basics of DMA measurements will be covered along with the test methods and the information gained from those. Various DMA applications ranging from polymer plastics, rubbers to composites will be discussed and the flexibility and versatility of such a 2-in-1 device concept will be demonstrated for extended polymer characterization.

DMA can provide quantitative and qualitative data regarding:

  • Viscoelastic moduli and damping
  • Material structure and morphology
  • Relaxation behavior (Primary, secondary)
  • Influence of fillers and fibers in polymers
  • Crystallization/melt<wbr />ing processes
  • Curing behavior

Detailed information about these properties is crucial for new material development as well as for design of new production processes. A new measuring device concept is introduced which combines an electronically commutated (EC) motor as rotational top drive and a moving magnet linear drive or another EC motor, as bottom drive to enable rheological measurements and DMA on one single device. The concept enables various modes of operation by using different combinations of the bottom drive. Besides working in the rheological modes such as separate motor transducer (SMT), combined motor transducer (CMT), counter-rotation and counter-oscillation the device is suitable to perform dynamic mechanical analysis in bending, tension, compression, and torsion as well as thermomechanical analysis (TMA).

Key Takeaways

  • Understand the benefits of combined Dynamic Mechanical Analysis and Rheology
  • Learn the design and benefits of a true multi-drive rheometer
  • Learn the current technologies, measurements and applications used in material development and testing

 

 

 

Date: 2020-04-22, 13:00 - 14:00 (AEDT UTC+11)
Language: English
Trainer: Dr Ashish Kumar

Dr. Ashish Kumar is Market Manager for the Characterisation product portfolio at Anton Paar Australia and Anton Paar New Zealand, including Rheometry, Mechanical Surface Testing, Particle Characterisation and Nanosurface Properties. He is responsible for technical support, application testing, product management and marketing activities for the different product lines, and has been since 2013. He holds a PhD in Chemical Engineering from The University of Melbourne (Australia) and has 11 years of rheology experience, five of those in the field of mineral processing and tailings disposal.

Get free access now!

Simply fill out the form below to receive free access to tools and restricted content.

Loading...

Error