Sample Changer:
Xsample 370
- Automated FTIR wine analysis with Lyza 5000 Wine
- Wide sample variety of wine, must, and must in fermentation
- Automated setting of water reference for accurate results
- Automated cell care procedures to improve instrument lifetime
Together with Lyza 5000 Wine, the Xsample 370 sample changer offers fully automated workflows for FTIR wine analysis. Filling, referencing, cleaning, and drying are conveniently performed without interaction. The flexible needle means the sample can be sucked out of a beaker placed onto the instrument or directly out of a bottle standing next to it.
Key features

Sample changer for easy and convenient operation
Save operator time: Perform measurements automatically in just a few steps. Results are delivered independently, irrespective of operator, and with zero variation in quality– every time. Say goodbye to costly remeasurements due to human error.

Sample changer for top-notch measurement results
Ensure top-quality measurements with automated water references. The Xsample 370 sample changer can even perform these references between measurements with zero interaction. This means time-consuming manual steps are avoided and accurate measurements guaranteed.
Leaving no room for error, the automated workflows cover a wide range of sample types, including wine, must, and must in fermentation.

Sample changer with automated cell care procedures
Especially if your instrument is not in use for a while, cell care is important but often forgotten. With automated cell care procedures, even when in idle mode, Xsample 370 helps improve the lifetime of your instrument. If you forget to clean the system or have other important work to do, the Xsample 370 sample changer performs all necessary steps – fully automated.
Technical specifications
Viscosity range | up to 1,000 mPa·s at ambient and measuring temperature |
Filling mode | with peristaltic pump |
Typical time for filling and measuring cycle | 2min |
Minimum sample volume | 24mL (at 30% pump speed) |
Environmental conditions (EN 61010) | indoor use only |
Operating temperature | +15 °C to +35 °C (+59 °F to +95 °F) |
Altitude | max. 3,000 m (9,840 ft) |
Power supply | CAN interface |
Dimensions excl. master instrument (L x W x H) Xsample 370 | 310 mm x 145 mm x 230 mm 12.2 in x 5.7 in x 9.1 in |
Weight incl. packaging, excl. master instrument Xsample 370 | approx. 7,6 kg (16,7551 lbs) |
Weight excl. master instrument Xsample 370 | 4 kg (8.82 lbs) |
Anton Paar Certified Service
- More than 350 manufacturer-certified technical experts worldwide
- Qualified support in your local language
- Protection for your investment throughout its lifecycle
- 3-year warranty
Documents
Compatible instruments
Similar products
Consumables
Consumables
If you do not find the item you require, please contact your Anton Paar sales representative.
To find out if you can purchase online from your location, check the online availability below.

ADAPTER UNF/HOSE (FEMALE/MALE)

NEEDLE Xsample 370

PETRI DISH 15x90 mm GLASS

BOTTLE FOR RINSING LIQUID

HOSE 3.2x6.4 mm TYGON A-60-G, BLACK (FORMERLY:
NORPRENE A-60-G)

HOSE 430x3x2 FEP 2x1/4"-28 UNF "EE"

HOSE 185X3X2 FEP 2X1/4"-28 UNF

HOSE 710x3x2 FEP 1x1/4"-28 UNF "BD"