Domed Hot Stage for Four-Circle Goniometers:
DHS 1100
- For in-situ high-temperature studies on almost all common four-circle goniometers and many XYZ stages
- Temperature range from 25 °C to 1100 °C
- For investigating phase transformations, texture, and internal stress in crystalline materials
DHS 1100 is a heating attachment which is a further development of the well-established DHS 900 Domed Hot Stage. It has an increased temperature range of 25 to 1100 °C. DHS 1100 is small and lightweight and can be mounted on almost all common four-circle goniometers and many XYZ stages. Under its innovative graphite dome, samples can be measured in vacuum, air and various other gases. DHS 1100 is an excellent sample stage for in-situ high-temperature studies of phase transformations, texture, and internal stress in crystalline materials.
Specifications
Operating temperature | 25 °C to 1100 °C |
---|---|
Temperature measurement | Pt-10% Rh-Pt thermocouple |
Atmospheres | Vacuum (10 -1 mbar), air, inert gas,nitrogen |
Max. operating pressure | max. 0.3 bar above atmospheric pressure |
Possible scattering angle | 0 to 166° 2Θ 0 to 85° Psi 0 to 360° Phi |
Sample holder material | Aluminium nitride |
Sample diameter | max. 25 mm |
Dome Material | Graphite |
Transmission (incident and diffracted rays) | CuKα: 65% |
Measure geometry | Reflection |
Anton Paar Certified Service
- More than 350 manufacturer-certified technical experts worldwide
- Qualified support in your local language
- Protection for your investment throughout its lifecycle
- 3-year warranty
Documents
-
DHS 1100 Brochures
Complementary products
If you do not find the item you require, please contact your Anton Paar sales representative.

PEEK DOME DHS
Spare dome to provide a vacuum/gas-tight enclosure of the sample. The PEEK dome produces less background signal in diffractograms than the graphite dome when using a linear or 2D detector.

GRAPHITE DOME DHS
Spare dome made of graphite to provide a vacuum/gas-tight enclosure of the sample.