Coatings, Paints

Boje

Premazi naneseni u tekućem, plinovitom ili krutom obliku štite i poboljšavaju površinska svojstva velikog raspona supstrata. Bilo da nastojite simulirati ponašanje u primjeni boje za dom ili želite analizirati formulaciju složenih nano-premaza – Anton Paar je za vas pripremio jedinstvena rješenja za mjerenje. Na dolje navedenom popisu pronađite mjerni instrument koji zadovoljava vaše specifične potrebe – ili nam se izravno obratite kako bismo vam pomogli da pronađete najbolje rješenje.

Stupite u kontakt

Anton Paar Proizvodi

Vaš odabir: Poništi sve filtre X
Vrsta operacije
Standardi
Skupina proizvoda
Vrsta uređaja
Prikazuje se do od

Nije pronađen nijedan rezultat!

Analizator apsopcije plina: QUADRASORB evo

Analizator apsorpcije pare: VSTAR

Analizator površinskog područja: AutoFlow BET+

Automated Multipurpose Powder X-Ray Diffractometer: XRDynamic 500

Automatizirani analizator kemisorpcije protoka: ChemBET Pulsar

Bioindenter tvrtke Anton Paar: UNHT³ Bio

Compact inline density meter: L-Dens

Compact Raman spectrometers: Cora 5001

Digitalni refraktometar: Abbemat

Abbemat Performance and Performance Plus

Digitalni refraktometar: Abbemat Performance

Five-station gas pycnometers for true density: PentaPyc and PentaFoam

Grijani izmjenjivač uzoraka: Xsample 610

High vacuum physisorption/chemisorption analyzers: autosorb iQ

HTR Compact: Reometrijski automatski uređaj za uzimanje uzoraka za velik kapacitet obrade uzoraka

HTR: Automatizacija reometra za velik kapacitet obrade uzoraka i rukovanje složenim uzorkom

Fraass Breaking Point Tester BPA 5 with bitumen coated plaque.

Ispitivač točke loma po Fraassu: BPA 5

With its extended low temperature range the automatic Abel closed cup tester can measure flash points or detect flammable vapors by the flash/no flash method

Ispitivač točke plamišta po Abelu: ABA 4

Izmjenjivač uzoraka: Xsample 530

Kombinirani senzor gustoće i brzine zvuka: L-Com 5500

Komora za niske temperature: TTK 600

Cryo & Humidity Chamber CHC plus+ is a unique combination of the multi-purpose CHC Cryo & Humidity Chamber and an advanced humidity (RH) generator for the analysis of humidity-dependent and/or temperature-dependent structural changes in materials using X-ray diffraction

Kriokomora s kontrolom vlažnosti: CHC plus⁺

Linijski mjerač gustoće: Serija L-Dens 7000

Linijski viskozimetar: L-Vis

Mercury intrusion pore size analyzers: PoreMaster

Micro Combi uređaj za ispitivanje: MCT³

Microwave digestion platform: Multiwave 5000

Microwave reactor: Monowave

Mjerač gustoće i brzine zvuka: DSA 5000 M

Mjerenje debljine premaza: Serija Calotest

Mjerna glava dinamičkog smičnog reometra: DSR 502

Modular Compact Rheometer: MCR 102e/302e/502e

Modularni kompaktni reometar: MCR 72/92

Motorizirano poravnavanje za XRD: stanica za poravnanje po z-osi

Nanoindentacijski tester: NHT³

Particle size analyzer: Litesizer

Portable density meter: DMA 35

Potpuno prilagodljivo rješenje za automatizaciju laboratorija: HTX

Remote Operating Terminal with wall mounting support for smart sensors

Radni terminal / daljinski radni terminal

Rashladna stanica s kupolom za četverokružne goniometre: DCS 500

Abbemat Heavy Duty

Refraktometar Heavy Duty: Abbemat Heavy Duty

The RheolabQC is the quality control rheometer from Anton Paar. RheolabQC with temperature device C-PTD 180/AIR/QC and with Flexible Cup Holder.

Rotacijski reometar: RheolabQC

Rotational viscometer: ViscoQC

Ručni mjerač gustoće: DMA 35 Basic

Serija Ultrapyc

Softver za analizu čestica: Kalliope™

Software solutions for ViscoQC: Software

Domed Hot Stage for Four-Circle Goniometers DHS 1100 with graphite dome for high-temperature X-ray studies of polycrystalline samples and thin films from 25 to 1100 °C

Stanica za grijanje s kupolom za četverokružne goniometre: DHS 1100

Tensile Stage: TS 600 - sample stage for in-situ X-ray diffraction studies of stress/strain phenomena in fibers, foils and thin films

Stanica za vlačno opterećenje: TS 600

Sustav za mikrovalnu digestiju: Multiwave 7000

Sustav za mikrovalnu digestiju: Multiwave GO Plus

Tribometar s geometrijom igle na disku: TRB³

Temperature Tribometer

Tribometar za visoke temperature THT

Ultra nanoindentacijski tester: UNHT³

Uređaj za ispitivanje otpornosti na mikroogrebotine Revetest®: RST³

Uređaj za ispitivanje otpornosti na nanoogrebotine: NST³

With its extended low temperature range the automatic Tag closed cup tester can measure flash points or detect flammable vapors by the flash/no flash method.

Uređaj za određivanje točke paljenja po TAG-u: TAG 4

Vakuumski i protočni otplinjač: FloVac

Vakuumski otplinjač: XeriPrep

High Temperature Vacuum Tribometer

Vakuumski tribometar: TRB V / THT V

Viskozimetar s kotrljajućom kuglicom: Lovis 2000 M/ME

XRD software: XRDanalysis

Zagrijani izmjenjivač uzoraka: Xsample 630

Prikazuje se do od

Anton Paar Primjene

Concentration Measurement of Sodium Hydroxide Solutions by Refractive Index

Concentration Measurement of Sodium Hydroxide Solutions by Refractive Index

The concentration of sodium hydroxide in water can be easily and quickly determined by refractive index measurement.

Improve Digestion Quality and Save Money – Microwave Digestion rules out Open Digestion

Improve Digestion Quality and Save Money – Microwave Digestion rules out Open Digestion

Reliable elemental analysis results need robust sample preparation to destroy sample matrices or to separate matrix from analytes. The sample preparation step is by far the most error-prone and critical step of the analytical procedure.

Refractive Index Measurement of Ionic Liquids

Refractive Index Measurement of Ionic Liquids

Ionic liquids are special designer solvents as they are nonvolatile and liquid at ambient temperature, leading to a wide range of applications. Their refractive index helps to control the quality and also to characterize them.

Have a Good Trip

Have a Good Trip

Refractometers are widely used in the automotive industry, e.g. to control the quality of oils, chemical liquids and solids such as plastics and glasses.

Mesoporous thin films - Investigating the structure of multi-layered films by GISAXS

Mesoporous thin films - Investigating the structure of multi-layered films by GISAXS

Single- and double-layered mesoporous thin films have been analyzed by GISAXS for their structural properties using the SAXSpoint system.

Characterization of the scratch resistance of ceramic tiles

Characterization of the scratch resistance of ceramic tiles

High temperature tribological behavior of advanced hard coatings for cutting tools

High temperature tribological behavior of advanced hard coatings for cutting tools

High temperature tribological behavior of advanced hard coatings for cutting tools

The influence of Surface Roughness on Instrumented Indentation Testing (IIT)

The influence of Surface Roughness on Instrumented Indentation Testing (IIT)

In-Situ observation of the scratch/indentation true contact area to provide analysis without being model-dependent

In-Situ observation of the scratch/indentation true contact area to provide analysis without being model-dependent

Nanoindentation and Nanoscratch of Oxide Coatings on Thin Film Polymer Substrates

Nanoindentation and Nanoscratch of Oxide Coatings on Thin Film Polymer Substrates

Nanoindentation approach to mechanical testing of extremely soft materials

Nanoindentation approach to mechanical testing of extremely soft materials

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Review of Indenter Materials for High Temperature Nanoindentation

Review of Indenter Materials for High Temperature Nanoindentation

Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)

Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)

The Ultra Nanoindentation Tester: New generation of thermal drift free indentation

The Ultra Nanoindentation Tester: New generation of thermal drift free indentation

Applications of nanoindentation in biology and medicine

Applications of nanoindentation in biology and medicine

Nanoindentation for biological materials

Identifying three different particle sizes in one sample with DLS

Identifying three different particle sizes in one sample with DLS

Particle suspensions often contain more than one size of particle. However, many particle analyzers cannot resolve particle mixtures, instead they detect an average of all sizes. The Litesizer™ 500 can detect three sizes in one sample.

Nanoparticles for Ceramics: Size, Stability & pH

Nanoparticles for Ceramics: Size, Stability & pH

In nanoparticle suspensions that will be used in ceramics, particle size and stability are of vital importance. Suspension stability is essential to ensure that the particles to stay in suspension, and maintain constant particle size.

Temperature-dependent GISAXS studies on thin films

Temperature-dependent GISAXS studies on thin films

The temperature-induced decomposition of a thin film structure has been studied using the SAXSpoint system with the new temperature-controlled GISAXS stage.

An insight into the Structure of Copolymer Surfactants

An insight into the Structure of Copolymer Surfactants

The structure of inhomogeneous (core-shell) nanoparticles was studied with the SAXSpoint system. The internal structure of Pluronic P123 micelles in water was determined by calculating the radial electron density profile.

SAXSpoint with MetalJet Source

SAXSpoint with MetalJet Source

SAXSpoint now integrates the high-brightness MetalJet X-ray source enabling ultra-fast SAXS measurements in the laboratory.

In-situ GISAXS heating experiments on self-assembled Gold nanoparticles

In-situ GISAXS heating experiments on self-assembled Gold nanoparticles

Thermal morphology changes of self-assembled Gold nanoparticles have been studied using the SAXSpoint system with the temperature controlled GISAXS stage.

Coatings, Paints - Rheology of Paints and Coatings with the RheolabQC

Coatings, Paints - Rheology of Paints and Coatings with the RheolabQC

Rheological measurements are essential for quality control and research in the paints and coatings industry. The Anton Paar Rotational Rheometer RheolabQC is perfectly suited for such applications.

Web-seminari

Nudimo Vam izvrstan i stalno rastući izbor web-seminara uživo i snimljenih zapisa o proizvodima, aplikacijama i znanstvenim temama.

Pogledajte web-seminare