- The single sample changer for different syringe sizes
- The robust solution for reliable and repeatable results
- Prevents sample carry-over with automatic rinsing and drying after each sample
- Highly resistant wetted parts for handling aggressive samples
Xsample 340 is a single sample changer for different types of syringes that automatically fills all Anton Paar master instruments using your favorite syringes. Perfect filling and excellent precision are facilitated by the system’s adjustable filling speed. Many years of trouble-free operation are guaranteed due to the straightforward and robust design. Xsample 340 is automatically prepared with up to two cleaning agents, ensuring perfect measuring conditions regardless of the operator and sample.
Perfect measuring results due to perfect cleaning
- Automatic rinsing and drying after each sample prevents sample carry-over which ensures the best measuring results.
- Up to two different cleaning agents can be used for an individual cleaning procedure.
- Measurement of a great variety of samples from low-viscosity samples up to 36,000 mPa.s
- Automatic air check before measurement to rule out sample cross-contamination
- Different adapters for 2.5 mL and 10 mL Braun syringes for your most frequently used consumables.
- Depending on the system size, a minimum amount of sample is needed – advisable when handling expensive or hazardous samples.
- Unified software user interface at the master instrument for easy operation and a short training phase.
- Force sensor used to adjust the filling speed for optimized filling behavior and reduction of user errors.
Intelligent instrument design
- For aggressive samples all wetted parts of Xsample 340 are made of highly resistant materials
- Robust instrument for measurements under harsh environmental conditions.
- High safety standard: when opening the safety cover the sampling procedure immediately stops in order to protect the operator
- Space-saving design and quick installation of instrument for self-explanatory start-up before first use
|Viscosity range||36,000 mPa·s at ambient and measuring temperature|
|Supported syringes||2 mL Luer plastic for sample viscosity up to 36,000 mPa·s|
5 mL Luer plastic for sample viscosity up to 10,000 mPa·s
10 mL Luer plastic for sample viscosity up to 9,000 mPa·s
5 mL glass for sample viscosity up to 10,000 mPa·s
|Filling mode||Force applied by syringe|
|Minimum sample volume per measurement||approx. 3 mL|
depending on system configuration
|Rinsing liquid consumption|
approx. 7 mL (if rinse time: 10 s)
|Compressed air supply||0.3 bar (4.35 psi) relative (air supply of the master instrument)|
max. 1.5 bar (21.8 psi) relative (air supply of Xsample 340)
optional: 2.0 bar (29 psi) relative (external compressed air)
|Necessary quality of air||Class 3 from ISO 8573-1:|
max. particle size: 5 μm
max. pressure dew point: –20°C (–4°F)
max. oil content: 1 mg/m3
|Environmental conditions |
|Indoor use only|
|Air humidity||10 to 90% relative humidity, non-condensing|
|Operating temperature||+15 to +35 °C (+59 to +95 °F)|
|Power supply||supplied by master instrument|
Mains voltage according to the type plate at the rear of master instrument (protective grounding required)
|Dimensions excl. master instrument|
(L x W x H)
|480 mm x 230 mm x 420 mm |
(18.9 in x 9.1 in x 16.5 in)
|Weight excl. master instrument||approx. 9.4 kg (20.7 lbs)|
Anton Paar Certified Service
- More than 350 manufacturer-certified technical experts worldwide
- Qualified support in your local language
- Protection for your investment throughout its lifecycle
- 3-year warranty
To find out if you can purchase online from your location, check the online availability below.Check online availability