Brabender:
Extruder/Extrusiograph 30/25 and 30/32
- Realistic simulation of production processes
- Reliable and meaningful results
- Small amounts of sample material
The Brabender measuring extruder and Extrusiograph models 30/25 and 30/32 are measuring heads heated electrically and driven by a Brabender torque rheometer. They are used for testing the extrudability of polymers and for studying problems in research and application under practice-oriented conditions. During the extrusion process, various parameters can be measured and recorded for subsequent evaluation.
Anton Paar Certified Service
- More than 350 manufacturer-certified technical experts worldwide
- Qualified support in your local language
- Protection for your investment throughout its lifecycle
- 3-year warranty
Documents
-
Brochure | Single Screw Extruders Brochures
Complementary products
If you do not find the item you require, please contact your Anton Paar sales representative.
Brabender:
Aqua Trough
- 304 stainless steel construction
- Hydraulic height adjustment
- Sturdy frame on rolling, locking casters
Brabender:
Blown Film Die
- Equipped with a band heater, ring nut, and standard adapter
- Supplied with a 1” orifice for use with the 3/4” single screw extruder and twin screw extruder
- Also available is a 2” orifice for use with the 1-1/4” single screw extruder
Brabender:
Blown Film Take-Off Unit
- User-friendly: Working height, winding torque and cooling air adjustable via touchscreen
- Application versatility: Adaptable to different film dimensions and properties
- Expandable: Measure and control film width and analyze film quality using optional modules
- MetaBridge Connect: Full control and automated data transfer to Brabender MetaBridge extruders
Brabender:
Blown Film Tower
- Designed for easy product collection
- Precision regulators
- Limited footprint
Brabender:
Conveyor Belt
- Adjustable height
- Continuously adjustable speed
Brabender:
CuttingDevice
- Easy integration: control and logging of knife speed via the software
- Compact: optimal dimensions for laboratory operation
- Flexibile: Knife holder extenable from 4 to 8 knifes, hence higher cutting frequency
- Hygienic design: Easy access to the parts to be cleaned
- Safety: Zero position of the knife does not stop directly in front of the die
Brabender:
Film-Blowing Die Head
- spiral mandrel distributors
- uills with easily exchangeable inserts
Brabender:
Film-Sheet-Ribbon (FSR)
- Extremely accurate product sizing
- Accurate heating or cooling of material
- CAN Bus communication via WINEXT Software or manually
- Stainless steel gaurds to protect pinch-point areas
- Emergency stop bottons located on both sides of unit
- OCS Film Quality camera system available
Brabender:
Filtratest
- Quick change of sieves with drawer system
- Integrated pre-heating of the sieve package
- Short-time cycle times
- continuous extrusion procedure by bypass option of the melt flow
- Comfortable Windows Software
- Option: sliding funnel combination for flushing ring and sample
Brabender:
Flex-Lip Die
- Die Assembly is available in a 2”, 4”, or a 6” width
- Horizontal or vertical design for extrusion sheet applications
- The universal design has a gap adjustment from 2-40mils
Brabender:
FQA Film Quality Analyzer
- Versatile: Identification of different defect types
- Efficient: Automatic evaluation according to size classes
- Continuous: Quality inspection in the running process
- Flexible: Suitable for laboratory systems and production use
Brabender:
Multi Strand Die
- Increase the extrusion output
- two-strand die or a four-strand
- different ranges of strand diameters
Brabender:
Pasta Die Head
- can be cooled with both air and water
- for pasta and similar products
Brabender:
Pelletizer
- Uniform pelletizing
- Variable pellet sizes: stepless adjustment of positioning and outfeed speed
- Various pellet lengths
- Low-noise operation
- Simple loading
- Operated manually or via PC
Brabender:
Pelletizer US version
- Manual Air Cooling Device
- 1/17 HP DC Drice Motor for feed roll
- 3/4 HP Motor for Drive rotor
- Offered as Table-Top OR mounted on mobile cart
Brabender:
Rheometric Capilary Die
- Designed to attach to ANY C.W. Brabender single-screw or conical twin-screw extruder
- Continuously extruding material through the die to collect pressure and mass throughput data
- Works with WINEXT Windows based extrusion software when using our Plasti-Corder Torque Rheometer, or by manual calculation
Brabender:
Rheometric Round Capillary Die Head
- Continuous operation
- Coverage of the occurring shear rate range
- Accurate viscosity and shear rate data with the corresponding corrections calculated by the software
- All acquired values are suitable to evaluate the shear and thermal stability of your material
Brabender:
Rheometric Slot Capillary Die Head
- Continuous operation Coverage of the occurring shear rate range
- Accurate viscosity and shear rate data with the corresponding corrections calculated by the software
- All acquired values are suitable to evaluate the shear and thermal stability of your material Requests
Brabender:
Ribbon Die
- Fixed Ribbon Die Assembly is available in either vertical or horizontal design.
Brabender:
Ribbon Die Head
- suitable for applications in plastics, rubber, food, and feed
- flexibility in terms of the belt thickness and width
- special geometries available on request
Brabender:
Rod Die
- Rod Die Assembly is available in either horizontal or vertical design for extruding a single round strand
- The die is designed to accommodate nozzle inserts capable of varying strand diameters
- Die can be modified for use with breaker plate assembly
Brabender:
Round Strand Die Head
- equipped with a heating collar
- diameter of 1 mm to 7 mm
- can be equipped with a cutting device
Brabender:
Swelltest
- Calculation of the swell value
- High-precision, non-contact measurement
- Continuous diameter measurement
- With diagram printout
Brabender:
Tubing Die
- Tubing Die Assembly is available in either horizontal and vertical design
- Tubing Die is supplied with three mandrel tips and three interchangeable die heads
Brabender:
Tubing Die Head
- easily exchangeable die inserts
- for different diameters and material strengths
Brabender:
Univex
- Excellent film quality
- High take off speed
- Accurate temperature conditioning
Brabender:
Vertical Forced Feeder
- Small sample sizes
- Compact
- Easy to clean
Brabender:
Water Bath
- Adjustable height
- With overflow valve
Brabender:
Winder
- Flexible and easy retrofitting of roll to belt haul off or vice versa
- Supports for various types of coils
- Precise setting of the haul off speed
- Adjustable distance between haul off and oscillating unit
- Ergonomic control panel
Brabender:
Wire Coating Die
- Interchangeable, easily attaches to any C.W. Brabender extruder
- Supplied with a band heater, ring nut, and standard adapter
- Shortened adapter available for use with breaker plate assembly
Brabender:
Wire Coating Die Head
- different diameters are possible
- wire production line on a laboratory scale
- Wrap wires with polymer coatings
Brabender:
Wire Take-Off Unit
- With Waterbath
- With CAN Bus
Enhance polymer processing with advanced analytics for better quality and efficiency.
Learn more
