PBA-W M Packaged Beverage Analyzer for Wine
The days of running through different labs and using different instruments are over! The PBA-W Packaged Beverage Analyzer for Wine is a single modular system that determines density, alcohol, total extract, CO2 content and other important quality parameter of your wine and sparkling wine. You can optionally expand the system to measure turbidity, pH, and O2. No sample preparation is required – your sample is measured directly from the filled bottle.
Up to six times faster than conventional systems, PBA-W is an indispensable, highly accurate time- and work-saver for wine and sparkling wine producers.
Get in touch Document FinderKey Features
Highest precision in only 4 minutes
- Excellent results in only 4 minutes, with no sample preparation required
- Determines CO2 content, alcohol content, and total extract from the original package in a closed system - without loss of CO2 or alcohol
Complete wine analysis in one measuring cycle
- Determines all parameters from only 120 mL to 150 mL sample
- Optional measurement of oxygen, turbidity and pH
- Measurement of wine, sparkling wine, sake and cider
The simplest adjustment and calibration
- Adjustment/calibration with water and an alcohol/water solution
- One single adjustment is valid for all samples
No sample preparation
- Less time required for your analysis
- Better repeatability & reproducibility
Comfortable and safe
- Measuring time: 4 minutes
- Modular design (Plug and Play)
- Intuitive touchscreen operation
- Safe and clean sample handling with the SFD or PFD/PFD Plus filling device
Technical Specifications
| Output parameters | |||
|---|---|---|---|
| |||
| Repeatability - standard deviation | |||
| Alcohol | 0.01 % vol | ||
| Density | 0.00005 g/cm3 (DMA™ 4100 M) or 0.00001 g/cm3 (DMA™ 4500) or 0.000001 g/cm3 (DMA™ 5000) | ||
| CO2 | 0.01 g/L (0.005 vol) | ||
| Turbidity (optional) | 0.2 EBC / 0.08 NTU | ||
| pH (optional) | 0.02 | ||
| Additional information | |||
| Sample volume per measurement | 120 mL to 150 mL | ||
| Typical measurement time | 3 to 4 minutes | ||
| Compressed gas supply | 7.5 ± 0.5 bar (109 ±7 psi) | ||
Anton Paar Certified Service
The Anton Paar quality in service and support:
- More than 350 manufacturer-certified technical experts worldwide
- Qualified support in your local language
- Protection for your investment throughout its lifecycle
Documents
Accessories
Showing to of