Ovo je obavezno polje.
Invalid
Broj dijela
Pogreška pri provjeri valjanosti!

Electrokinetic analyzer for solid surface analysis:
SurPASS 3

Model:
Samo internetska cijena | isklj.uklj. 0PDV
Cijena
na zahtjev
Informacije o kupnji
Kupi Anton Paar instrumente putem interneta
Broj dijela:
Provjerite dostupnost u internetskoj trgovini Zatražite ponudu Kupite ovaj proizvod putem interneta
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci

The SurPASS 3 series features fully automated zeta potential analysis of macroscopic solids under real-life conditions. As electrokinetic analyzers, they employ the classic streaming potential and streaming current method for a direct analysis of the surface zeta potential. The zeta potential is related to the surface charge at a solid/liquid interface and is a key parameter for understanding surface properties and developing new specialized materials. 

Glavne značajke

Solid surface charge analysis made easy

Solid surface charge analysis made easy

The SurPASS 3 series allows for direct analysis of the zeta potential at the solid/liquid interface by means of streaming potential and streaming current measurement. This gives access to the full range of zeta potential of technical materials down to a few millivolts at unprecedented reliability and reproducibility. Gain instant access to information on surface charge without the need for sophisticated evaluation or expert knowledge. 

Measuring solutions from tiny particles to large wafers

Measuring solutions from tiny particles to large wafers

The wide range of SurPASS 3 measuring cells covers it all: Elaborate measuring cells accommodate samples of any geometry ranging from powders and fibers to planar solids. Sample-specific measuring cells for contact lenses, hollow fiber membranes, flexible tubings, syringes, and vials open up surface charge analysis on samples with complex geometries. The “plug in and start” functionality allows for a quick exchange of measuring cells. The software automatically recognizes the measuring cells and displays the zeta potential.

Fully automated measurements in less than two minutes

Fully automated measurements in less than two minutes

The intuitive SurPASS 3 software guides you through the measurement and displays all key parameters in real-time. The SurPASS 3 series provides zeta potential results in less than two minutes for maximized sample throughput. SurPASS 3 allows you to study pH dependences of zeta potential fully automatically and reveals the isoelectric point for a deep understanding of your sample’s chemistry. Liquid-on-solid surface adsorption kinetics can also be followed in real-time on model surfaces and on your actual sample.

Modular setup tailored to your needs

Modular setup tailored to your needs

The SurPASS 3 series is just as versatile as your applications. Dedicated solutions are available for membrane applications, biomaterials, cosmetics, detergents, and semiconductors. Whether you are working on porous materials, such as membranes, or non-porous films and plates, particles >25 µm, granular material, fibers, or materials which swell strongly or are conductive: there are no restrictions. The modular setup of the instrument and measuring cells allows you to easily extend your zeta potential analysis to cover tomorrow’s needs.

Tehničke specifikacije

SurPASS 3 SurPASS 3 Eco
Measuring range
Streaming potential ±2000 mV ± (0.2 % + 4 μV)
Streaming current ±2 mA ± (0.2 % + 1 pA)
Cell resistance 5 Ω to 20 MΩ ± (2 % + 0.5 Ω)
Pressure measurement 3500 mbar ± (0.2 % + 0.5 mbar)
External pressure supply (compressed N₂) is required for differential pressure > 1200 mbar
1200 mbar ± (0.2 % + 0.5 mbar)
pH value pH 2 to pH 12
Conductivity 0.1 mS/m to 1000 mS/m
Temperature 20 °C to 40 °C
Temperature control option is available
Sample size requirements
Porous films, foils, or plates Rectangular-shaped: 20 mm x 10 mm (max. thickness: 2 mm )
Disk-shaped: 14 mm or 15 mm in diameter (max. thickness: 2 mm)
Non-porous films, foils, or plates Rectangular-shaped: 20 mm x 10 mm (max. thickness: 2 mm) or
min. 35 mm x 15 mm (max. thickness: 40 mm)

Disk-shaped: 14 mm or 15 mm in diameter (max. thickness: 2 mm) or
min. 17 mm in diameter (max. thickness: 40 mm)
Particles Particle size: min. 25 μm
Fibers Min. 100 mg
Fabrics Min. 30 mm x 30 mm
Hollow fiber membranes Length: min. 170 mm
Ceramic membranes Flat sheet: 14 mm in diameter
Single channel: outer diameter 10 mm or 13 mm
Multichannel: outer diameter 25 mm or 30 mm
Cylindrical cores Height: max. 4 inch
Diameter: 1 inch
Flexible tubing Length: min. 100 mm
Outer diameter: 0.7 mm to 6 mm
Pre-filled syringes Syringe barrel “1.0 mL long” (ISO 11040-4)
Vials 2R/4R vials (ISO format), outer diameter 16 mm
Technical requirements
Mains supply AC 115 to 230 V, 50 to 60 Hz, 200 VA
Dimensions 600 mm x 432 mm x 245 mm (D x W x H)
Footprint: 612 mm x 536 mm (D x W)
Clearance: 360 mm
Weight 26 kg 24 kg
Software requirements
  • Microsoft Windows® 7 32/64 bit with SP1 or later is required. Windows 7 Starter is not supported. Microsoft Windows® 8 32/64 bit Microsoft Windows® Server 2008/2008 R2 32/64 bit with Service Pack 2 or higher is required for Windows Server 2008 Microsoft Windows® 10 32/64 bit
  • Intel® Core™ i3 CPU
  • 4 GB RAM (depends on operating system)
  • 20 GB free disk space
  • 1 free USB port
  • Screen resolution of at least 1024 x 768 at True Color (32 bit)

Certificirana usluga servisa Anton Paar

Kvaliteta usluge Anton Paar u usluzi i podršci:
  • Više od 350 tehničkih stručnjaka s certifikatom proizvođača širom svijeta
  • Kvalificirana podrška na vašem lokalnom jeziku
  • Zaštita za vaše ulaganje tijekom njegovog životnog ciklusa
  • Trogodišnje jamstvo
Saznajte više

Dokumenti

SurPASS 3 publications

Asymmetric layer-by-layer polyelectrolyte nanofiltration membranes with tunable retention

Scheepers D, Chatillon B, Nijmeijer K, Borneman Z. Asymmetric layer-by-layer polyelectrolyte nanofiltration membranes with tunable retention. Journal of Polymer Science. 2021; 59: 1293. https://doi.org/10.1002/pol.20210166

Influence of protein adsorption on aggregation in prefilled syringes

Yoneda S, Maruno T, Mori A, Hioki A, Nishiumi H, Okada R, Murakami M, Zekun W, Fukuhara A, Itagaki N, Harauchi Y, Adachi S, Okuyama, K, Sawaguchi T, Torisu T, Uchiyama S. Influence of protein adsorption on aggregation in prefilled syringes. Pharamceutical Biotechnology. 2021; 110: P3568. https://doi.org/10.1016/j.xphs.2021.07.007

Surface zeta potential of ALD-grown metal-oxide films

Xia Z, Rozyyev V, Mane AU, Elam JW, Darling SB. Surface zeta potential of ALD-grown metal-oxide films. Langmuir. 2021; 37: 11618. https://doi.org/10.1021/acs.langmuir.1c02028

Tailoring the chemical functionalization of a transparent polyethylene foil for its application in an OLED-based DNA biosensor

Dansico E, Maroh B, Feldbacher S, Mühlbacher I, Schlögl S, Melpignano P. Tailoring the chemical functionalization of a transparent polyethylene foil for its application in an OLED-based DNA biosensor. Applied Surface Science. 2021; 552: 149408. https://doi.org/10.1016/j.apsusc.2021.149408

Applicability of electro-osmotic flow for the analysis of the surface zeta potential

Plohl O, Fras Zemljic L, Potrc S, Luxbacher T. Applicability of electro-osmotic flow for the analysis of the surface zeta potential. RSC Advances. 2020; 10: 6777. https://doi.org/10.1039/C9RA10414C

Physicochemical characterization of packaging foils coated by chitosan and polyphenols colloidal formulations

Zemljič LF, Plohl O, Vesel A, Luxbacher T, Potrč S. Physicochemical characterization of packaging foils coated by chitosan and polyphenols colloidal formulations. International Journal of Molecular Sciences. 2020; 21(2):495. https://doi.org/10.3390/ijms21020495

Chitosan/glycosaminoglycan scaffolds for skin reparation

Sandri G, Rossi S, Bonferoni MC, Miele D, Faccendini A, Del Favero E, Di Cola E, Cornaglia AI, Boselli C, Luxbacher T, Malavasi L, Cantu L, Ferrari F. Chitosan/glycosaminoglycan scaffolds for skin reparation. Carbohydrate Polymers. 2019; 220: 219. https://doi.org/10.1016/j.carbpol.2019.05.069

MS2 bacteriophage inactivation using a N-doped TiO2-coated photocatalytic membrane reactor: Influence of water-quality parameters

Horovitz I, Avisar D, Luster E, Lozzi L, Luxbacher T, Mamane H. MS2 bacteriophage inactivation using a N-doped TiO2-coated photocatalytic membrane reactor: Influence of water-quality parameters. Chemical Engineering Journal. 2018; 354: 995. https://doi.org/10.1016/j.cej.2018.08.083

New collagen-coated calcium phosphate synthetic bone filler (Synergoss®): A comparative surface analysis

Iviglia G, Morra M, Cassinelli C, Torre E, Rodriguez Y Baena R. New collagen-coated calcium phosphate synthetic bone filler (Synergoss®): A comparative surface analysis. International Journal of Applied Ceramic Technology. 2018; 15: 910. https://doi.org/10.1111/ijac.12854

 

Consumables & Accessories

Consumables & Accessories

Accessories

Accessories

Not all items are purchasable online in specific countries.

To find out if you can purchase online from your location, check the online availability below.

Samo internetska cijena | isklj.uklj. 0PDV

SET OF FILTER DISKS WITH 25 µm MESH 14 mm

Kompatibilan sa:
SurPASS 3 Standard | Eco
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci
Broj dijela: 24398

SET OF STANDARD FABRICS FOR VERIFICATION MEASUREMENT

Kompatibilan sa:
SurPASS 3 Standard | Eco
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci
Broj dijela: 182927
Detalji o proizvodu
contains 25 standard cotton fabrics for verification measurement

ADHESIVE TAPE FOR ADJUSTABLE GAP CELL

Kompatibilan sa:
SurPASS 3 Standard | Eco
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci
Broj dijela: 171350

pH ELECTRODE FOR SurPASS 3

Kompatibilan sa:
SurPASS 3 Standard | Eco
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci
Broj dijela: 163342

SET OF FILTER DISKS WITH 25 µm MESH 10 mm

Kompatibilan sa:
SurPASS 3 Standard | Eco
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci
Broj dijela: 165417

SAMPLE HOLDERS FOR ADJUSTABLE GAP CELL 10 x 20 mm

Kompatibilan sa:
SurPASS 3 Standard | Eco
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci
Broj dijela: 166525

SPARE HOSES FOR ELECTROLYTE TRANSPORT

Kompatibilan sa:
SurPASS 3 Standard | Eco
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci
Broj dijela: 167240
Detalji o proizvodu
Contains 1 m of each inlet tube (transparent) and outlet tube of SurPASS 3.

SET OF SPARE GASKETS FOR ADJUSTABLE GAP CELL 10 x 20 mm

Kompatibilan sa:
SurPASS 3 Standard | Eco
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci
Broj dijela: 175381

HOSE CONNECTOR THROTTLE VALVE FOR EXTERNAL PRESSURE SUPPLY

Kompatibilan sa:
SurPASS 3 Standard | Eco
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci
Broj dijela: 167239

SET OF SPARE GASKETS FOR SurPASS 3

Kompatibilan sa:
SurPASS 3 Standard | Eco
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci
Broj dijela: 181826
Detalji o proizvodu
Contains O-rings of the plug-in module of SurPASS 3 except for the electrodes.

ELECTROLYTE BEAKER 250 ml

Kompatibilan sa:
SurPASS 3 Standard | Eco
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci
Broj dijela: 162703

SET OF SPARE GASKETS FOR SurPASS 3 ELECTRODES

Kompatibilan sa:
SurPASS 3 Standard | Eco
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci
Broj dijela: 181828
Detalji o proizvodu
Contains O-rings of both Ag/AgCl and gold electrodes of SurPASS 3.

Measuring Cell for 1 mL Pre-filled Syringes

Kompatibilan sa:
SurPASS 3 Standard | Eco
Više informacija
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci

Measuring Cell for Core Samples

Kompatibilan sa:
SurPASS 3 Standard | Eco
Više informacija
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci

Mjerna ćelija za membrane sa šupljim vlaknima

Kompatibilan sa:
SurPASS 3 Standard | Eco
Više informacija
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci
Broj dijela: 189555

Mjerna ćelija za fleksibilne cijevi

Kompatibilan sa:
SurPASS 3 Standard | Eco
Više informacija
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci

Mjerna ćelija za keramičke membrane

Kompatibilan sa:
SurPASS 3 Standard | Eco
Više informacija
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci
SurPASS™ 3 Cylindrical Cell

Cilindrična ćelija

Kompatibilan sa:
SurPASS 3 Standard | Eco
Više informacija
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci
SurPASS™ 3 Clamping cell

Stezna ćelija

Kompatibilan sa:
SurPASS 3 Standard | Eco
Više informacija
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci
SurPASS™ 3 Adjustable Gap Cell

Ćelija s prilagodljivom širinom otvora

Kompatibilan sa:
SurPASS 3 Standard | Eco
Više informacija
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci

Mjerna ćelija za meke kontaktne leće

Kompatibilan sa:
SurPASS 3 Standard | Eco
Više informacija
Vrijeme isporuke: %1$s - %2$s radni dani %1$s – %2$s tjedna %1$s – %2$s mjeseci