This is a required field.
Invalid
Part number
Error in validation!

Packaged Beverage Analyzer:
PBA 5001 Soft Drink

  • +3
Model:
  • Simultaneous determination of °Brix and CO₂ content
  • Results are more than 6x quicker than with conventional methods
  • Modular setup: 10+ industry-specific parameters
  • Zero influence from dissolved CO₂ on °Brix results
  • Analysis of the finished package: zero operator influence 

Get results for °Brix and CO₂ content in three minutes and for %Diet in six minutes. This is up to 6x faster than conventional methods. The Packaged Beverage Analyzers combine up to four instruments to determine all quality parameters for regular, mid-calorie, and diet soft drinks as well as (diet) energy drinks and carbonated bottled water in one go. There’s zero prior preparation or intermittent cleaning, which saves you up to two hours a day. This fast quality control for soft drinks helps you optimize your blending process, ensures ideal carbonation levels, and guarantees confidence in the final bottled product. 

Key features

Here you have a single system, configured according to your individual needs, controlling all relevant parameters for soft drink quality. Simply put the final package in the filling device, and the sample is filled automatically under pressure – no chance for contamination or operator influence. The system is operated via a single intuitive user interface, and all data is stored safely, either on the instrument or in a single digital space via AP Connect, our lab execution software.

All quality control tests for soft drinks in one go

All quality control tests for soft drinks in one go

  • Determine %Diet, °Brix, and CO₂ concentration with a single system in a single measuring cycle
  • Analyze your entire soft drink portfolio, including regular, mid-calorie, and diet soft drinks, energy drinks, and carbonated water
  • Reduce reference analysis for diet products to an absolute minimum, to free up lab capacities
  • Safeguard final product quality and do away with out-of-spec production
Speed up soft drink quality control by 600 %

Speed up soft drink quality control by 600 %

  • Parallel analysis of all parameters in only three to six minutes (depending on system configuration) – more than 6x faster than conventional methods
  • Automatic pressurized filling directly from glass bottles, PET bottles, and cans: zero operator influence
  • Save up to seven minutes per sample for degassing and filtration
  • No degassing required: Benefit from automatic CO₂ correction of all measurement results
  • Software-guided adjustment procedure lets anyone manage quality control of diet products – no special training required

 

Set up your individual measuring system

Set up your individual measuring system

  • In its basic version, PBA 5001 Soft Drink determines the three most important soft drink parameters: °Brix, CO₂ concentration, and density
  • For determination of %Diet, the system is simply configured with a different master instrument
  • To perfect your analysis, upgrade your basic system with modular extensions for measurement of dissolved O₂ and pH
  • Increase system efficiency and confidence in your final product quality with every module added

 

Determine the true amount of dissolved CO₂ in soft drinks

Determine the true amount of dissolved CO₂ in soft drinks

  • Unique selective CO₂ measuring method delivers supreme repeatability of 0.005 vol.
  • Pin-point accuracy: Determine the true amount of CO₂
  • No influence by other dissolved gases such as air or nitrogen
  • Automatic filling error detection for the density and CO₂ measuring cell leaves no chance for errors

 

Intuitive usability for maximum convenience

Intuitive usability for maximum convenience

  • Simultaneous operation of all connected measuring modules through a single user interface
  • Minimal training: Built-in wizards guide operators through measuring and adjustment steps
  • Wide range of preconfigured output quantities
  • Adaptable user interface for maximum operator convenience
  • Centralized data management via AP Connect lab execution software
  • Automated adjustment of inline sensors via Davis 5 software – no need for manual operator interaction 

 

Technical specifications

  PBA 5001 Soft Drink PBA 5001 Diet Soft Drink
Measuring range
Density 0 g/cm³ to 3 g/cm³
Temperature 20 °C
Pressure Up to 10 bar (145 psi) absolute pressure
Concentration sugar actual 0 °Brix to 15 °Brix
Diet concentration - 0 to 200 % Diet
or 0 to 200 mL NaOH
or 0 to 200 g/L TA
or 10 to 10,000 ppm Alkalinity
or 0 to 600 mg/100 mL H3PO4 
CO₂ concentration

0 vol. to 6 vol. (0 g/L to 12 g/L) at 30 °C (86 °F)
0 vol. to 10 vol. (0 g/L to 20 g/L) <15 °C (59 °F)

O₂ concentration 0 ppm to 4 ppm
pH value pH 0 to pH 14
Repeatability s.d.
Density

0.00001 g/cm³ (DMA 4101)
0.000005 g/cm³ (DMA 4501)
0.000001 g/cm³ (DMA 5001)

0.000005 g/cm³ (DMA 4501 Diet)
Temperature

0.02 °C (0.04 °F) (DMA 4101)
0.01 °C (0.02 °F) (DMA 4501)
0.001 °C (0.002 °F) (DMA 5001)

0.01 °C (0.02 °F) (DMA 4501 Diet)
Concentration sugar actual

0.015 °Brix (DMA 4101)
0.01 °Brix (DMA 4501)
<0.01 °Brix (DMA 5001)

0.01 °Brix (DMA 4501 Diet)
Diet concentration - 0.5 %Diet
CO₂ concentration 0.005 vol. (0.01 g/L)
O₂ concentration 2 ppb (in the range <200 ppb)
pH value 0.02 (in the range pH 3 to pH 7)
General information
Power features U-View™, FillingCheck™, ThermoBalance™, full-range viscosity, correction, ultra-fast measuring mode, condition monitoring
Minimum amount of sample per measurement 150 mL
Typical measuring time per sample 3 minutes (6 minutes for %Diet analysis)
Typical sample throughput 10 to 20 samples per hour, depending on system configuration
Display 10.1" TFT WXGA (1280 px x 800 px); PCAP touchscreen
Controls Touchscreen, optional keyboard, mouse, and bar code reader
Internal storage Up to 10,000 measuring values with camera images
Power supply AC 100 to 240 V, 50/60 Hz, fluctuation ±10 %, 190 VA
Communication interfaces 5 x USB, Ethernet, CAN, RS232
Dimensions (L x W x H) 526 mm x 730 mm x 446 mm (20.7 in x 28.7 in x 17.6 in)
Weight Approx. 35.7 kg (77 lbs)
Environmental conditions (EN 61010) Indoor use only
Ambient temperature 15 °C to 35 °C (59 °F to 95 °F)
Air humidity Non-condensing
20 °C, <90 % relative humidity
25 °C, <60 % relative humidity
30 °C, <45 % relative humidity

Anton Paar Certified Service

The Anton Paar quality in service and support:
  • More than 350 manufacturer-certified technical experts worldwide
  • Qualified support in your local language
  • Protection for your investment throughout its lifecycle
  • 3-year warranty
Learn more

Documents

Categories
Industry
Application
Product
Your choice: Reset all filters

Consumables & Software

Consumables & Software

Software

Software

Not all items are purchasable online in specific countries.

To find out if you can purchase online from your location, check the online availability below.

Interface caps DMA HR01 series

Compatible with:
PBA 5001 Soft Drink Standard | Diet
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 232006

Lab Execution Software:
AP Connect 

Compatible with:
PBA 5001 Soft Drink Standard | Diet
More info
Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months