Automated tapped density analyzers:
Automated tap density analyzers
The Autotap and Dual Autotap tapped density analyzers for powders are simple-to-use, automated devices which comply with a large number of internationally recognized standard methods. They provide a high level of test method control with a user-selectable, lockable number of taps. Tapping rate and drop height are fixed to provide consistent results from sample to sample. A large range of sample sizes can be accommodated with the use of a number of different graduated cylinder sizes.
Ensure the quality of raw materials and predict the flow behavior of powders
Autotaps and Dual Autotaps have been used around the world for decades to provide customers with consistent, reliable bulk density and flowability values – essential knowledge for measuring pharmaceutical powders, metal powders, food powders, pigments, etc.
Accommodates a wide range of graduated cylinder sizes for full flexibility
The amount of sample you have available to test will define the graduated cylinder size you use. It is always recommended that the initial volume fill between 70 % and 95 % of the cylinder. Autotaps and Dual Autotaps accommodate any single-piece glass-graduated cylinder with a hexagonal base. The tapping platforms have hole patterns and adjustable hold-down clamps so that any graduated cylinder from 5 mL to 500 mL may be used. There is also an adapter should you need to measure in a 1 L graduated cylinder.
Operates in accordance with a large number of international standard test methods
The design of Autotaps and Dual Autotaps ensures compliance with all internationally recognized standard test methods describing the use of tapped density to determine bulk density involving a device capable of ensuring a drop height of 3 mm, a tapping frequency between 250 and 300 taps per minute, and the use of a specific type of graduated cylinder.
|Model||Autotap||Dual Autotap 2|
|Graduated cylinders||1 x 250 cm³||2 x 250 cm³|
|Graduated cylinder sizes||5 cm³ to 500 cm3 (standard) |
1000 cm³ (with adapter plate)
|Drop height||3 mm (0.125 in)|
|Tapping rate||260 per min.|
|Dimensions (H x W x D)||175 mm* x 540 mm x 280 mm (7 in* x 21 in x 11 in) |
|Weight||11 kg (24 lbs)||14 kg (31 lbs)|
Anton Paar Certified Service
- More than 350 manufacturer-certified technical experts worldwide
- Qualified support in your local language
- Protection for your investment throughout its lifecycle
- 3-year warranty
Food Characterization Application Reports
Granulation and Drying: the Choice of Excipients Matters Application Reports
Measuring Geometric Density without Mercury Application Reports
Milk Powder Characterization - Chapter 2: Packaging, Transport, and Storage Application Reports
e-Book - Field Guide to Pharmaceutical Powder Characterization Application Reports
eBook - Field Guide to Food Powder Characterization Application Reports
Autotap Brochure Brochures
Brochure | Powder Characterization Brochures
NEW HORIZONS IN PARTICLE ANALYSIS Brochures
To find out if you can purchase online from your location, check the online availability below.
AT/DAT, 1000 mL CYLINDER ADAPTER
- Includes one 1000 mL cylinder
- Includes necessary hardware
AT/DAT, NOISE REDUCTION CABINET
- Reduces the noise during operation by more than 15dB
- 30 inches wide by 30 inches high by 15 inches deep