E. Connection to Smartphone & Tablet
Starting with app version 1.1.1, EasyDens can deliver the following measuring parameters:
Standard Parameters:
• Density in g/cm³ and kg/m³, not temperature-compensated
• Specific gravity (SG), temperature-compensated
Optionally available measuring parameters:
• Extract for the determination of original extract and apparent extract in percent by weight (% w/w, equates to degrees Plato), temperature-compensated
• Alcohol content in percent by volume (% v/v), temperature-compensated Used for the determination of the alcohol content of binary aqueous alcohol solutions and distillates with a low extract content (e.g. spirits, gin, vodka, etc.). It is not possible to measure the alcohol content of beer, wine, or similar products due to their high extract content.
• Sugar content (°Brix), temperature-compensated
In addition to the standard measuring parameters, you can choose one of the optionally available measuring parameters to be activated for free. The other optionally available measuring parameters can be activated via in-app purchase.
• Extract (% w/w): measurement of the extract concentration in beer wort / monitoring the fermentation process of beer by daily measurement of the apparent extract
• Alcohol content (% v/v): determination of the alcohol content in binary mixtures of ethanol and water (no added sugar); e.g. distillates, spirits, etc.
• Sugar content (°Brix): measurement of the sugar content in (quasi) binary mixtures of sugar and water; e.g. various fruit juices and soft drinks During wine production, a daily measurement of the apparent sugar content enables monitoring the fermentation process.
Included in delivery:
• 1 EasyDens portable density meter
•
1 protection cover for EasyDens (incl. 2 O-rings)
(
In the course of our introductory offer, and until
further notice, this optional accessory is included in the delivery free of
charge.)
• 1 syringe 10 mL
• 2 AA batteries
• 2 adapters Luer
• 1 adapter Luer lock
• 1 waste hose
• 1 illustrated application description
• 1 certificate of compliance
• 1 safety guide
EasyDens has not been provided an EC type examination certificate, hence it cannot be officially calibrated. In many cases, customers will test instruments of this accuracy class on their own by checking it against an officially calibrated lab instrument or by checking it at authorized round robin tests.
Please note that the missing possibility of being officially calibrated does not devalue the quality of the measuring results. Anton Paar guarantees the specified accuracy and repeatability values.
Yes. In order to receive correct and accurate results, the sample must be degassed before you measure it.
Choose one of the following procedures to degas your sample:
• Stir the sample until no more bubbling occurs. Note that this can take up to 15 minutes.
• Put the sample in an ultrasonic bath for approximately 5 to 10 minutes.
• Fill the sample into a flask, and seal the flask with a stopper. Alternately shake the flask and lift the stopper to release the pressure until no pressure is built up anymore.
• Fill the supplied syringe half with your sample. Then seal the tip of the syringe with your finger and pull back the green plunger. Take your finger off the tip and let the extracted gas escape from the syringe. Push the plunger forwards to press the air out of the syringe. Repeat the specified steps several times.
Filtering the sample is not imperative.
However, consider that large particles (> 1 mm) can clog the inlet and the outlet of EasyDens. If your sample contains such large particles, filter it through a customary coffee filter. With follow-up measurements of samples from the same batch (e.g. fermentation curve measurements), remember to always subject all these samples to the same treatment.
Remember to always subject all samples from the same batch to the same preparatory treatment. This is the only way to obtain comparable measuring results and to rule out possible impairment of your measuring results because of different sample preparation. Therefore, always use the same procedure to degas and filter your sample.
EasyDens operates on the basis of the oscillating U-tube method allowing to draw conclusions on the density of a liquid from the difference between oscillations with air and oscillations with the filled sample. For this reason, after power-on the measuring cell is electronically excited to vibrate at its characteristic frequency. The high frequency oscillation is audible for the human ear as a high-pitched tone. This is not a shortcoming but an indication that the instrument is operational.
You need around 2 mL of your sample to fill the measuring cell and perform a proper measurement.
In order to fully replace sample residues from a preceding measurement, we recommend filling 10 mL for follow-up measurements. This amount matches the volume of the supplied syringe.
The temperature of the filled sample or the cleaning liquid must be in the range 0 to 80 °C (32 to 176 °F). If you fill liquids with higher temperatures, plastic parts might soften and connections become leaky.
Consider also that the automatic temperature compensation only works for sample temperatures in the range 5 to 30 °C (41 to 86 °F).
Concentration values that are calculated from the measured density (e.g. °Brix, % v/v alcohol, % w/w extract – these values will be available with upcoming v1.1) are automatically temperature-compensated to 20 °C (68 °F).
Density values (g/cm3, kg/m3) are not temperature-compensated.
For the calculation of SG (Specific Gravity), the sample's density value, compensated to 20 °C, is divided by the density of water at 20 °C. A temperature coefficient of 0.0003 g/cm3/K is applied in the temperature compensation of the sample's density value. This coefficient is typical for aqueous solutions.
The automatic temperature compensation works for sample temperatures in the range 5 to 30 °C (41 to 86 °F).
Yes. EasyDens can also be used without its protection cover. However, consider that only when the protection cover is mounted, you can be sure that the instrument is sufficiently protected against spilled liquids, particularly during filling. Moreover, the protection cover facilitates to use the instrument in an upright position. With the instrument standing upright, residual gas in the sample can rise to the upper part of the measuring cell. This reduces the risk of distorted results.
Yes. Measurements can also be performed with the instrument in a horizontal position. However, in order to minimize the influence of potential residual gas in the sample, which can cause distorted results, we recommend performing measurements only with the instrument in an upright position. With the instrument standing upright, residual gas in the sample can rise to the upper part of the measuring cell. This reduces the risk of distorted results.
We recommend rinsing the measuring cell after measurements with at least 10 mL of warm distilled or deionized water to prevent contamination or deposits. After rinsing the measuring cell with distilled or deionized water, it is not necessary to dry the cell because the water will evaporate without residues.
For details about cleaning, refer to section D.
Yes. Discard your sample after having finished the measurement, do not return the sample into the original container. In doing so, you avoid the risk of contamination.
Continuous flow measurements do not comply with the intended use of the instrument. The CE safety review definitely resolved upon the regulation also included in section 2.2 of the instruction manual: “Use EasyDens only as a stand-alone unit. Do not combine the instrument with other instruments or devices for automation purposes.”
The measuring cell of EasyDens will withstand a pressure of around 10 bar. A pressure that high cannot be reached by proper filling with a syringe.
No. It is not necessary to clean and dry the measuring cell between single measurements. Sample residues in the measuring cell will be fully replaced by the subsequent sample.
EasyDens comes with a 10 mL syringe. We recommend using a syringe of this size because 10 mL are sufficient to fully replace the previous sample and fill the measuring cell with the new sample. Even if the measuring cell has been filled with water, 10 mL of the new sample are sufficient to prevent a dilution of your sample.
So you do not risk producing wrong measuring results due to the mixing of the current sample with the previous one or with water in the measuring cell.
After you have finished a measurement series, rinse the measuring cell with warm distilled or deionized water. To this end, fill the supplied syringe with warm distilled or deionized water, and rinse it through the measuring cell and the waste hose. After rinsing the measuring cell with distilled or deionized water, it is not necessary to dry the cell because the water will evaporate without residues.
In addition, clean the measuring cell once a week with a suitable laboratory cleaner (e.g. Mucasol®). Attend to the product's application instruction with special regard to the concentration of the cleaner. Follow the directions in the EasyDens instruction manual.
If you do not use the instrument for a longer period, it is advisable to sanitize the measuring cell with high-proof ethanol after rinsing it with warm distilled or deionized water.
If visible deposits have formed inside the measuring cell, or if test measurements of your instrument with distilled or deionized water show inadmissible deviations from the target values, we recommend cleaning the measuring cell with a suitable laboratory cleaner (e.g. Mucasol®). Attend to the product's application instruction with special regard to the concentration of the cleaner. Follow the directions in the EasyDens instruction manual.
In particular after the measurement of wort samples, it is advantageous to clean the measuring cell with warm water because it considerably facilitates the removal of sample residues. We suggest, in this case, first cleaning the measuring cell with warm tap water and subsequently rinsing with warm distilled or deionized water. Take care that no residues of tap water stay in the measuring cell as this leads to the formation of limescale eventually causing distorted results.
You will get distilled or deionized water at any DIY (do-it-yourself) store, drugstore, or gas station / filling station. Suitable laboratory cleaners are available at any shop for laboratory supplies and at brew shops.
In principle, the quality of water from the DIY store / from the gas station is sufficient as long as the water has been actually and explicitly distilled or deionized.
EasyDens is compatible with any smartphone and tablet that features a Bluetooth LE interface (also known as Bluetooth Low Energy, BLE, Bluetooth Smart, or Bluetooth Smart Ready). In addition, the operating system on the device needs to be either Android 4.3 or higher, or iOS version 7.0 or higher.
The EasyDens app does not require an active internet connection for its ordinary use as a control application of EasyDens. Mind, however, that downloading the app from the Google Play Store or from the Apple App Store does require an active internet connection.
1. From the Google Play Store or the Apple App Store, download the Anton Paar EasyDens app free of charge onto your smartphone or tablet.
2. Activate the Bluetooth function on your smartphone or tablet.
3. Switch EasyDens on by pressing the on/off button once.
4. Start the EasyDens app on your smartphone or tablet.
5. Your smartphone or tablet will automatically establish a connection with EasyDens.
Follow the procedure below step by step to resolve connectivity problems between EasyDens and your smartphone or tablet:
1. Check the specifications of your smartphone or tablet to verify that the basic requirements for a communication with EasyDens are met (see question E.1).
2. If the connection between your device and the switched on EasyDens is not established automatically when you start the app with the Bluetooth function activated, go back to the start screen of the app and tap the "Measure" button once again. Your smartphone or tablet will restart the search for EasyDens.
3. If there is still no connection being established, check the Bluetooth visibility settings on your smartphone or tablet. Ensure that your device is visible for other devices, and that it allows establishing a connection to them.
4. If you have refused necessary authorizations of the app during the installation process (e.g. access to images), the app will not work properly. In this case, uninstall the app and reinstall it with the necessary authorizations.
If all of the above steps fail to connect your device with EasyDens, we kindly ask you to forward a log file to Anton Paar via email using the feedback function of the EasyDens app. Anton Paar staff will contact you as quickly as possible.
You can tell that EasyDens is ready for operation by a blue blinking LED. In addition, a high-pitched tone, caused by the high-frequency oscillation of the measuring cell, is clearly audible. As soon as a connection to the smartphone/tablet has been established, the LED will change from blinking to continuous light.
We recommend performing check measurements with distilled or deionized water at regular intervals.
Compare the density values which your instrument delivers for distilled or deionized water with the correct values (at the respective temperature). You will find the correct values in appendix B of the EasyDens instruction manual. There, you will also find a detailed explanation of check measurements and the necessary steps.
This small black spot at the turn of the measuring cell is the NTC temperature sensor. As the density of a liquid is highly depending on its temperature, the temperature sensor of EasyDens has been fitted directly at the measuring cell in order to ensure an accurate temperature compensation.
Order consumables for EasyDens at Anton Paar’s online shop: shop.anton-paar.com.
If the FAQs were not able to solve your issue, we kindly ask you to visit www.anton-paar.com and get in touch with us via the live chat function.