Sample Changer:
Xsample 320

The single sample changer for easy operation
Multiple fillings from the same vial if required
Highly resistant wetted parts for handling of aggressive samples
Quick replacement of the sample without intermediate cleaning

Xsample 320

Customized solutions
Key features
Specifications
Documents
Compatible instruments
Similar products
Consumables and more

The new industrial- grade peristaltic pump of Xsample 320 enables measurements at the push of a button. Once the parameters are set, user-independent filling and therefore a reduction of handling errors can be achieved with this sample changer designed for single samples. Operators are able to focus on more important tasks while filling and measurement are performed automatically. The flexible filling speed of Xsample 320 ensures optimized sample treatment, which leads to perfect measuring results.

Customized solutions

Multiparameter Measurement System:
Beer Measurement Systems Configuration 3

Key features

Easy to operate and reduction of handling errors

Enter the filling parameters via touchscreen, mouse, or keyboard for quick and easy data entries
Fast assignment of methods with specific settings to suit the sample’s characteristics
Adjustable pump speed for optimized filling behavior and reduction of user errors
User-independent filling of the master instrument ensures repeatable measuring results

High sample throughput and increase of productivity

Short filling times due to the industrial- grade peristaltic pump and replacement of the sample without intermediate cleaning
Multiple filling out of one vial for the highest accuracy: The density deviation between two subsequent measurements is calculated and validated.
Operators can focus on more important work instead of performing every measuring step manually.

Robust design and easy installation

For aggressive samples all wetted parts of the Xsample™ 320 (high resistance) are made of highly resistant materials
The maintenance-free peristaltic pump ensures trouble-free operation during its long life cycle.
Plug and Play: Xsample™ 320 is automatically activated when the master instrument is started.
Unified software user interface at the master instrument for easy operation and a short training phase

Specifications

Viscosity range	up to 3,000 mPa•s at ambient and measuring temperature¹
Filling mode	with peristaltic pump: Suction mode in one direction Suction mode with pumping back and forth at the beginning
Typical time for filling and measuring cycle	2 to 5 minutes
Minimum sample volume	approx. 10 mL to 20 mL
Environmental conditions (EN 61010)	indoor use only
Operating temperature	+15 °C to +35 °C (+59 °F to +95 °F)
Pollution degree	2
Over voltage category	II
Altitude	max. 3,000 m (9,840 ft)
Power supply	supplied by the master instrument AC power supply voltage according to technical data plate at the rear of the master instrument (protective grounding required)
Dimensions excl. master instrument (L x W x H)	205 mm x 148 mm x 205 mm (8.1 in x 5.8 in x 8.1 in)
Weight excl. master instrument	approx. 3.5 kg (7.7 lbs)

¹ Recommended for samples with a viscosity up to 500 mPa•s at ambient and measuring temperature. For samples with a viscosity higher than 500 mPa•s at ambient and measuring temperature, bubbles may occur during filling.