This is a required field.
Invalid
Part number
Error in validation!

Temperature Control:
Convection Temperature Devices (-160 °C to +1000 °C)

  • +6
  • For temperature-controlled rheological and DMA measurements on melts, solids, films, and fibers from -160 °C to 1000 °C
  • Homogeneous temperature distribution for accurate & stable results
  • For MCR measuring systems: parallel-plate, cone-plate, DMA in torsion or extension, controlled relative humidity, and more

Perfect temperature control for measurements on melts and solids (DMA) and extensional rheology on films and fibers – the convection temperature devices for the MCR rheometer series make it happen. Due to their symmetric design, they guarantee an absolutely homogeneous temperature distribution and thus accurate and stable temperature control in all measuring systems, from parallel plates to solid bar fixtures, for optimal results when measuring polymer melts, glass melts, salt melts, metal melts, and solids. With their innovative design and comprehensive range of accessories, the convection temperature devices are a must for experienced rheologists.

Key features

Control the greatest influence of all

Control the greatest influence of all

The convection temperature devices allow for controlling the greatest rheological influence of all: temperature. Benefit from an enormous temperature range to meet your specific sample requirements. At the same time the design gives you the possibility to use almost every measuring system from the extensive MCR accessory portfolio, from parallel-plate systems (including disposable systems) to dynamic mechanical analysis in torsion or extension. Furthermore, a controlled relative humidity can also be applied to the sample in combination with temperature. Rely on the high-precision temperature control required for truly accurate results for all kinds of rheological tests.

Count on the most innovative production techniques

Count on the most innovative production techniques

State-of-the-art production techniques such as 3D metal printing bring temperature control to the next level. The unique design of the inner shells of the CTD 600 MDR convection temperature device, which are manufactured as one piece each, results in an absolutely homogeneous temperature distribution within the oven. With CTD 600 MDR, temperature gradients are a thing of the past. Additionally, only low gas flow rates are needed, minimizing unwanted effects on measurements due to air vortexes or drying samples.

Extensive MCR accessory portfolio

Extensive MCR accessory portfolio

A wide range of applications require flexible temperatures, measuring systems, and testing solutions. In addition to standard measuring systems, solutions made of Inconel, graphite, or other temperature- and corrosion-resistant materials allow characterization of a broad variety of samples and even high-temperature materials (e.g., metals, salts, glass). Beyond rheological measurements and dynamic mechanical analysis, convection temperature devices enable powder rheology and liquid density measurements up to 1000 °C. Anton Paar’s CTD 1000 MDR can be combined with a lower linear drive to perform dynamic mechanical analysis in tension, compression, and bending up to 1000 °C. For applications in an oxygen-free environment, Anton Paar offers an Argon glovebox proofed configuration based on the MCR 702e Space MultiDrive

Low temperature options to match every application are also available.  

Enjoy the comfortable setup and ease of use

Enjoy the comfortable setup and ease of use

Whichever choices you make, all temperature devices are swiftly and easily integrated and exchanged, and your rheometer reliably adapts to each new setup and temperature requirement. The following MCR features make sure of this: Toolmaster™ automatically recognizes and configures all connected devices, TruGap™ controls and adjusts the rheometer’s actual measuring gap. T-Ready™ cuts short unnecessary waiting times by immediately detecting temperature equilibration. The integrated non-reflecting interior illumination of the CTD 600 MDR temperature device ensures a perfect view of your sample during the measurement.

Rely on full safety even at high temperatures

Rely on full safety even at high temperatures

All the outside surfaces of Anton Paar’s convection temperature devices for the MCR series are touch-proof up to the highest temperatures. The exhausts are designed with cooling mechanisms to ensure safe and convenient use at any time, at any temperature. When closing the ovens, an integrated mechanism prevents the shells from touching the measuring system, avoiding damage to the device.

Gain real-time insights into your sample during the measurement

Gain real-time insights into your sample during the measurement

The combination of the integrated interior illumination with the high-quality optical system of the digital eye camera ensures sharp and uniformly illuminated real-time pictures and videos of your sample over the complete temperature range. This allows for detailed investigations of different measurement effects, such as edge fracture, sagging, optically visible phase transitions, degradation, and gap emptying. Furthermore, this data can add valuable information to the analysis and validate measurement results. The real-time camera pictures and videos are displayed in the media explorer of the rheometer’s RheoCompass™ software and can be directly added to a diagram and assigned to the measuring points at which they were recorded. The digital eye camera can be installed on CTD in less than one minute.

Technical specifications

Chamber Temperature range Temperature control Max. heating rate Max. cooling rate Typical materials Measuring systems¹ Accessories
CTD 180 -20 °C to 180 °C Peltier convection 18 °C/min 10 °C/min food, coatings, paints, cosmetics, pharmaceuticals, detergents, solvents, adhesives, sealants, plastisols, hotmelts, petrochemicals, asphalt, bitumen, epoxy resins, polymer solutions PP, PP disposable, CP, CC, SRF, UXF, SCF, SER, tribology, CTL, TPB, powder shear cell Optional:
CTD 450 TDR -150 °C to 450 °C Electrical convection 50 °C/min 35 °C/min polymer melts, reinforced materials, films and fibers, epoxy resins, aluminum, metals and alloys, low-temperature glasses PP, PP disposable, CP, CC, SRF, UXF, SCF, SER, CPP, tribology Optional:
CTD 600 MDR -160 °C to 600 °C Electrical convection 35 °C/min 30 °C/min polymer melts, reinforced materials, films and fibers, epoxy resins, aluminum, metals and alloys, low-temperature glasses PP, PP disposable, CP, CC, SRF, UXF, SCF, SER, CPP, tribology, CTL, TPB, powder shear cell Included:
  • DigiEye 250 camera option
Optional:
CTD 1000 MDR -150 °C to +1000 °C Electrical convection 60 °C/min 30 °C/min Metals and alloys (e.g., aluminum), low-temperature glass, salts PP, CC, SRF, TPB Optional:

[1] Ask for customized measuring systems

Anton Paar Certified Service

The Anton Paar quality in service and support:
  • More than 350 manufacturer-certified technical experts worldwide
  • Qualified support in your local language
  • Protection for your investment throughout its lifecycle
  • 3-year warranty
Learn more

Documents

Categories
Industry
Application
Product
Your choice: Reset all filters

No results found!

See more

Compatible instruments

Industry
Applications
Standards
Your choice: Reset all filters

Similar products

Consumables

Consumables

Not all items are purchasable online in specific countries.

To find out if you can purchase online from your location, check the online availability below.

DISPOSABLE MEASURING CUP C-CC39/D/AL 1 pack = 100 pcs

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 17094

SILICON MOLD FOR ASPHALT BINDER (PP25) ACCORDING AASHTO T315

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 26300

HOSE 3x5 SILICONE

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 50814

HOSE 4X6 NYLON

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 72595

DISPOSABLE MEASURING CUP C-CC27/D/AL 1 pack = 100 uds.

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 3716

DISPOSABLE DISHES 56 mm 1 PACK = 100 PIECES

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 4847

ANTIFREEZE FOR WATER COOLING SYSTEMS AND THERMOSTATS

Online price only | excl.incl. 0VAT
Delivery time: %1$s – %2$s working days %1$s – %2$s weeks %1$s – %2$s months
Part number: 23739
Product details
- Antifreeze and corrosion protection
- Suitable for aluminum
- Silicate free
- Free of amines, nitrites and phosphates
Recommended for the cooling system of Multiwave 7000/7x01. 1 btl = 1.5 l